From: Lubomir Rintel <lkundrak@v3.sk>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>,
Marc Gonzalez <marc.w.gonzalez@free.fr>,
Mans Rullgard <mans@mansr.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
linuxppc-dev@lists.ozlabs.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH 01/10] ARM: dts: pxa*: Don't redeclare phandle references
Date: Fri, 20 Mar 2020 18:40:58 +0100 [thread overview]
Message-ID: <20200320174107.29406-2-lkundrak@v3.sk> (raw)
In-Reply-To: <20200320174107.29406-1-lkundrak@v3.sk>
Extend the nodes by their phandle references instead of recreating the
tree and declaring references of the same names.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/boot/dts/pxa168-aspenite.dts | 26 ++-
arch/arm/boot/dts/pxa910-dkb.dts | 288 +++++++++++++-------------
2 files changed, 155 insertions(+), 159 deletions(-)
diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts
index 2ad40e373194c..8bade6bf395b3 100644
--- a/arch/arm/boot/dts/pxa168-aspenite.dts
+++ b/arch/arm/boot/dts/pxa168-aspenite.dts
@@ -18,18 +18,16 @@ chosen {
memory {
reg = <0x00000000 0x04000000>;
};
-
- soc {
- apb@d4000000 {
- uart1: uart@d4017000 {
- status = "okay";
- };
- twsi1: i2c@d4011000 {
- status = "okay";
- };
- rtc: rtc@d4010000 {
- status = "okay";
- };
- };
- };
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&twsi1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
};
diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts
index 0f899e672e824..ce76158867c7f 100644
--- a/arch/arm/boot/dts/pxa910-dkb.dts
+++ b/arch/arm/boot/dts/pxa910-dkb.dts
@@ -18,155 +18,153 @@ chosen {
memory {
reg = <0x00000000 0x10000000>;
};
+};
- soc {
- apb@d4000000 {
- uart1: uart@d4017000 {
- status = "okay";
+&uart1 {
+ status = "okay";
+};
+
+&twsi1 {
+ status = "okay";
+
+ pmic: 88pm860x@34 {
+ compatible = "marvell,88pm860x";
+ reg = <0x34>;
+ interrupts = <4>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ marvell,88pm860x-irq-read-clr;
+ marvell,88pm860x-slave-addr = <0x11>;
+
+ regulators {
+ BUCK1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
};
- twsi1: i2c@d4011000 {
- status = "okay";
-
- pmic: 88pm860x@34 {
- compatible = "marvell,88pm860x";
- reg = <0x34>;
- interrupts = <4>;
- interrupt-parent = <&intc>;
- interrupt-controller;
- #interrupt-cells = <1>;
-
- marvell,88pm860x-irq-read-clr;
- marvell,88pm860x-slave-addr = <0x11>;
-
- regulators {
- BUCK1 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- };
- BUCK2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- };
- BUCK3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <2800000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO2 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- LDO5 {
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO10 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- LDO12 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- LDO13 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- LDO14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
- };
- rtc {
- marvell,88pm860x-vrtc = <1>;
- };
- touch {
- marvell,88pm860x-gpadc-prebias = <1>;
- marvell,88pm860x-gpadc-slot-cycle = <1>;
- marvell,88pm860x-tsi-prebias = <6>;
- marvell,88pm860x-pen-prebias = <16>;
- marvell,88pm860x-pen-prechg = <2>;
- marvell,88pm860x-resistor-X = <300>;
- };
- backlights {
- backlight-0 {
- marvell,88pm860x-iset = <4>;
- marvell,88pm860x-pwm = <3>;
- };
- backlight-2 {
- };
- };
- leds {
- led0-red {
- marvell,88pm860x-iset = <12>;
- };
- led0-green {
- marvell,88pm860x-iset = <12>;
- };
- led0-blue {
- marvell,88pm860x-iset = <12>;
- };
- };
- };
+ BUCK2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
};
- rtc: rtc@d4010000 {
- status = "okay";
+ BUCK3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ LDO5 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ LDO13 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ LDO14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ rtc {
+ marvell,88pm860x-vrtc = <1>;
+ };
+ touch {
+ marvell,88pm860x-gpadc-prebias = <1>;
+ marvell,88pm860x-gpadc-slot-cycle = <1>;
+ marvell,88pm860x-tsi-prebias = <6>;
+ marvell,88pm860x-pen-prebias = <16>;
+ marvell,88pm860x-pen-prechg = <2>;
+ marvell,88pm860x-resistor-X = <300>;
+ };
+ backlights {
+ backlight-0 {
+ marvell,88pm860x-iset = <4>;
+ marvell,88pm860x-pwm = <3>;
+ };
+ backlight-2 {
+ };
+ };
+ leds {
+ led0-red {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-green {
+ marvell,88pm860x-iset = <12>;
+ };
+ led0-blue {
+ marvell,88pm860x-iset = <12>;
};
};
};
};
+
+&rtc {
+ status = "okay";
+};
--
2.25.1
next prev parent reply other threads:[~2020-03-20 17:41 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-20 17:40 [PATCH 0/10] NS 8250 UART Device Tree improvements Lubomir Rintel
2020-03-20 17:40 ` Lubomir Rintel [this message]
2020-03-20 17:40 ` [PATCH 02/10] ARM: dts: pxa*: Fix serial port names Lubomir Rintel
2020-03-20 17:41 ` [PATCH 03/10] ARM: dts: pxa*: Make the serial ports compatible with xscale-uart Lubomir Rintel
2020-03-20 17:41 ` [PATCH 04/10] ARM: dts: mmp2-brownstone: Don't redeclare phandle references Lubomir Rintel
2020-03-20 17:41 ` [PATCH 05/10] ARM: dts: mmp*: Fix serial port names Lubomir Rintel
2020-03-20 17:41 ` [PATCH 06/10] ARM: dts: mmp*: Make the serial ports compatible with xscale-uart Lubomir Rintel
2020-03-20 17:41 ` [PATCH 07/10] ARM: dts: tango4: Make /serial compatible with ns16550a Lubomir Rintel
2020-03-21 11:11 ` Måns Rullgård
2020-03-20 17:41 ` [PATCH 08/10] powerpc/fsl: Make serial ports " Lubomir Rintel
2020-03-23 17:59 ` Rob Herring
2020-03-20 17:41 ` [PATCH 09/10] dt-bindings: serial: Move Marvell compatible string to 8250 binding doc Lubomir Rintel
2020-03-20 17:41 ` [PATCH 10/10] dt-bindings: serial: Convert 8250 to json-schema Lubomir Rintel
2020-03-23 19:00 ` Rob Herring
2020-03-23 19:01 ` [PATCH 0/10] NS 8250 UART Device Tree improvements Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200320174107.29406-2-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=benh@kernel.crashing.org \
--cc=daniel@zonque.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=haojian.zhuang@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mans@mansr.com \
--cc=marc.w.gonzalez@free.fr \
--cc=mark.rutland@arm.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=robert.jarzmik@free.fr \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).