Linux-Serial Archive on lore.kernel.org
 help / color / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: gregkh@linuxfoundation.org
Cc: jslaby@suse.com, andriy.shevchenko@linux.intel.com,
	matwey.kornilov@gmail.com, linux-serial@vger.kernel.org,
	linux-kernel@vger.kernel.org, heiko@sntech.de, lukas@wunner.de,
	christoph.muellner@theobroma-systems.com,
	giulio.benetti@micronovasrl.com,
	Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Subject: [PATCH v2 7/7] serial: 8250_dw: add em485 support
Date: Thu, 26 Mar 2020 00:14:22 +0100
Message-ID: <20200325231422.1502366-8-heiko@sntech.de> (raw)
In-Reply-To: <20200325231422.1502366-1-heiko@sntech.de>

From: Giulio Benetti <giulio.benetti@micronovasrl.com>

Need to use rs485 transceiver so let's use existing em485 485 emulation
layer on top of 8250.

Add rs485_config callback to port and uses the standard em485 start and
stop helpers.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[moved to use newly added start/stop helpers]
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
 drivers/tty/serial/8250/8250_dw.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index aab3cccc6789..588319075b36 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -414,6 +414,9 @@ static int dw8250_probe(struct platform_device *pdev)
 	p->serial_out	= dw8250_serial_out;
 	p->set_ldisc	= dw8250_set_ldisc;
 	p->set_termios	= dw8250_set_termios;
+	p->rs485_config = serial8250_em485_config;
+	up->rs485_start_tx = serial8250_em485_start_tx;
+	up->rs485_stop_tx = serial8250_em485_stop_tx;
 
 	p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
 	if (!p->membase)
-- 
2.24.1


      parent reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-25 23:14 [PATCH RFC v2 0/7] serial: 8250: Add rs485 emulation to 8250_dw Heiko Stuebner
2020-03-25 23:14 ` [PATCH DON'T APPLY v2 1/7] serial: Allow uart_get_rs485_mode() to return errno Heiko Stuebner
2020-03-25 23:14 ` [PATCH DON'T APPLY v2 2/7] dt-bindings: serial: Add binding for rs485 bus termination GPIO Heiko Stuebner
2020-03-25 23:14 ` [PATCH DON'T APPLY v2 3/7] serial: 8250: Support " Heiko Stuebner
2020-03-25 23:14 ` [PATCH v2 4/7] serial: 8250: Handle implementations not having TEMT interrupt using em485 Heiko Stuebner
2020-03-25 23:47   ` Giulio Benetti
2020-03-26  0:05     ` Heiko Stübner
2020-03-26  2:02       ` Giulio Benetti
2020-03-25 23:14 ` [PATCH v2 5/7] dt-bindings: serial: Add binding for rs485 receiver enable GPIO Heiko Stuebner
2020-03-25 23:14 ` [PATCH v2 6/7] serial: 8250: Support separate rs485 rx-enable GPIO Heiko Stuebner
2020-03-25 23:14 ` Heiko Stuebner [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200325231422.1502366-8-heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=christoph.muellner@theobroma-systems.com \
    --cc=giulio.benetti@micronovasrl.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heiko.stuebner@theobroma-systems.com \
    --cc=jslaby@suse.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=matwey.kornilov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Serial Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-serial/0 linux-serial/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-serial linux-serial/ https://lore.kernel.org/linux-serial \
		linux-serial@vger.kernel.org
	public-inbox-index linux-serial

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-serial


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git