linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/2] serial: max310x: Make use of device properties
@ 2020-10-07  8:46 Andy Shevchenko
  2020-10-07  8:46 ` [PATCH v2 2/2] serial: max310x: Use devm_clk_get_optional() to get the input clock Andy Shevchenko
  0 siblings, 1 reply; 2+ messages in thread
From: Andy Shevchenko @ 2020-10-07  8:46 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-serial; +Cc: Andy Shevchenko

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/tty/serial/max310x.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 21130af106bb..f25b9516109c 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -15,8 +15,8 @@
 #include <linux/device.h>
 #include <linux/gpio/driver.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
@@ -267,7 +267,7 @@ struct max310x_one {
 	container_of(_port, struct max310x_one, port)
 
 struct max310x_port {
-	struct max310x_devtype	*devtype;
+	const struct max310x_devtype *devtype;
 	struct regmap		*regmap;
 	struct clk		*clk;
 #ifdef CONFIG_GPIOLIB
@@ -1269,7 +1269,7 @@ static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 }
 #endif
 
-static int max310x_probe(struct device *dev, struct max310x_devtype *devtype,
+static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype,
 			 struct regmap *regmap, int irq)
 {
 	int i, ret, fmin, fmax, freq, uartclk;
@@ -1478,7 +1478,7 @@ static struct regmap_config regcfg = {
 #ifdef CONFIG_SPI_MASTER
 static int max310x_spi_probe(struct spi_device *spi)
 {
-	struct max310x_devtype *devtype;
+	const struct max310x_devtype *devtype;
 	struct regmap *regmap;
 	int ret;
 
@@ -1490,18 +1490,9 @@ static int max310x_spi_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	if (spi->dev.of_node) {
-		const struct of_device_id *of_id =
-			of_match_device(max310x_dt_ids, &spi->dev);
-		if (!of_id)
-			return -ENODEV;
-
-		devtype = (struct max310x_devtype *)of_id->data;
-	} else {
-		const struct spi_device_id *id_entry = spi_get_device_id(spi);
-
-		devtype = (struct max310x_devtype *)id_entry->driver_data;
-	}
+	devtype = device_get_match_data(&spi->dev);
+	if (!devtype)
+		devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data;
 
 	regcfg.max_register = devtype->nr * 0x20 - 1;
 	regmap = devm_regmap_init_spi(spi, &regcfg);
@@ -1526,7 +1517,7 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table);
 static struct spi_driver max310x_spi_driver = {
 	.driver = {
 		.name		= MAX310X_NAME,
-		.of_match_table	= of_match_ptr(max310x_dt_ids),
+		.of_match_table	= max310x_dt_ids,
 		.pm		= &max310x_pm_ops,
 	},
 	.probe		= max310x_spi_probe,
-- 
2.28.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH v2 2/2] serial: max310x: Use devm_clk_get_optional() to get the input clock
  2020-10-07  8:46 [PATCH v2 1/2] serial: max310x: Make use of device properties Andy Shevchenko
@ 2020-10-07  8:46 ` Andy Shevchenko
  0 siblings, 0 replies; 2+ messages in thread
From: Andy Shevchenko @ 2020-10-07  8:46 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-serial; +Cc: Andy Shevchenko

Simplify the code which fetches the input clock by using
devm_clk_get_optional(). If no input clock is present
devm_clk_get_optional() will return NULL instead of an error
which matches the behavior of the old code.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/tty/serial/max310x.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index f25b9516109c..9795b2e8b0b2 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1273,7 +1273,6 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 			 struct regmap *regmap, int irq)
 {
 	int i, ret, fmin, fmax, freq, uartclk;
-	struct clk *clk_osc, *clk_xtal;
 	struct max310x_port *s;
 	bool xtal = false;
 
@@ -1287,23 +1286,24 @@ static int max310x_probe(struct device *dev, const struct max310x_devtype *devty
 		return -ENOMEM;
 	}
 
-	clk_osc = devm_clk_get(dev, "osc");
-	clk_xtal = devm_clk_get(dev, "xtal");
-	if (!IS_ERR(clk_osc)) {
-		s->clk = clk_osc;
+	s->clk = devm_clk_get_optional(dev, "osc");
+	if (IS_ERR(s->clk))
+		return PTR_ERR(s->clk);
+	if (s->clk) {
 		fmin = 500000;
 		fmax = 35000000;
-	} else if (!IS_ERR(clk_xtal)) {
-		s->clk = clk_xtal;
-		fmin = 1000000;
-		fmax = 4000000;
-		xtal = true;
-	} else if (PTR_ERR(clk_osc) == -EPROBE_DEFER ||
-		   PTR_ERR(clk_xtal) == -EPROBE_DEFER) {
-		return -EPROBE_DEFER;
 	} else {
-		dev_err(dev, "Cannot get clock\n");
-		return -EINVAL;
+		s->clk = devm_clk_get_optional(dev, "xtal");
+		if (IS_ERR(s->clk))
+			return PTR_ERR(s->clk);
+		if (s->clk) {
+			fmin = 1000000;
+			fmax = 4000000;
+			xtal = true;
+		} else {
+			dev_err(dev, "Cannot get clock\n");
+			return -EINVAL;
+		}
 	}
 
 	ret = clk_prepare_enable(s->clk);
-- 
2.28.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-10-07  8:46 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-07  8:46 [PATCH v2 1/2] serial: max310x: Make use of device properties Andy Shevchenko
2020-10-07  8:46 ` [PATCH v2 2/2] serial: max310x: Use devm_clk_get_optional() to get the input clock Andy Shevchenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).