Linux-Serial Archive on lore.kernel.org
 help / color / Atom feed
From: Daniel Mack <daniel@zonque.org>
To: jacmet@sunsite.dk, gregkh@linuxfoundation.org
Cc: jirislaby@kernel.org, linux-serial@vger.kernel.org,
	Daniel Mack <daniel@zonque.org>
Subject: [PATCH] serial: tty: uartlite: fix console setup
Date: Fri, 28 May 2021 15:33:20 +0200
Message-ID: <20210528133321.1859346-1-daniel@zonque.org> (raw)

Remove the hack to assign the global console_port variable at probe time.
This assumption that cons->index is -1 is wrong for systems that specify
'console=' in the cmdline (or 'stdout-path' in dts). Hence, on such system
the actual console assignment is ignored, and the first UART that happens
to be probed is used as console instead.

Move the logic to console_setup() and map the console to the correct port
through the array of available ports instead.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
 drivers/tty/serial/uartlite.c | 27 ++++++---------------------
 1 file changed, 6 insertions(+), 21 deletions(-)

diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index f42ccc40ffa6..a5f15f22d9ef 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -505,21 +505,23 @@ static void ulite_console_write(struct console *co, const char *s,
 
 static int ulite_console_setup(struct console *co, char *options)
 {
-	struct uart_port *port;
+	struct uart_port *port = NULL;
 	int baud = 9600;
 	int bits = 8;
 	int parity = 'n';
 	int flow = 'n';
 
-
-	port = console_port;
+	if (co->index >= 0 && co->index < ULITE_NR_UARTS)
+		port = ulite_ports + co->index;
 
 	/* Has the device been initialized yet? */
-	if (!port->mapbase) {
+	if (!port || !port->mapbase) {
 		pr_debug("console on ttyUL%i not present\n", co->index);
 		return -ENODEV;
 	}
 
+	console_port = port;
+
 	/* not initialized yet? */
 	if (!port->membase) {
 		if (ulite_request_port(port))
@@ -655,17 +657,6 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
 
 	dev_set_drvdata(dev, port);
 
-#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
-	/*
-	 * If console hasn't been found yet try to assign this port
-	 * because it is required to be assigned for console setup function.
-	 * If register_console() don't assign value, then console_port pointer
-	 * is cleanup.
-	 */
-	if (ulite_uart_driver.cons->index == -1)
-		console_port = port;
-#endif
-
 	/* Register the port */
 	rc = uart_add_one_port(&ulite_uart_driver, port);
 	if (rc) {
@@ -675,12 +666,6 @@ static int ulite_assign(struct device *dev, int id, u32 base, int irq,
 		return rc;
 	}
 
-#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
-	/* This is not port which is used for console that's why clean it up */
-	if (ulite_uart_driver.cons->index == -1)
-		console_port = NULL;
-#endif
-
 	return 0;
 }
 
-- 
2.31.1


                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210528133321.1859346-1-daniel@zonque.org \
    --to=daniel@zonque.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jacmet@sunsite.dk \
    --cc=jirislaby@kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Serial Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-serial/0 linux-serial/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-serial linux-serial/ https://lore.kernel.org/linux-serial \
		linux-serial@vger.kernel.org
	public-inbox-index linux-serial

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-serial


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git