linux-serial.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Pali Rohár" <pali@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
	"Gregory Clement" <gregory.clement@bootlin.com>,
	"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
	"Vladimir Vid" <vladimir.vid@sartura.hr>,
	"Marek Behún" <kabel@kernel.org>,
	"Geert Uytterhoeven" <geert@linux-m68k.org>,
	linux-clk@vger.kernel.org, linux-serial@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/11] dt-bindings: mvebu-uart: fix documentation
Date: Fri, 25 Jun 2021 16:36:10 +0200	[thread overview]
Message-ID: <20210625143617.12826-5-pali@kernel.org> (raw)
In-Reply-To: <20210625143617.12826-1-pali@kernel.org>

Both UARTs support higher baudrates and are not limited to baudrate 230400.
Only current kernel driver implementation has limitation for both UARTs in
maximal baudrate 230400. This limitation will be removed in next patches.
So remove incorrect information about (hardware) limitation from bindings.

UART1 (standard variant with DT node name 'uart0') has register space
0x12000-0x12018 and not whole size 0x200. So fix also this in example.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: d160c3413478 ("dt-bindings: mvebu-uart: update documentation with extended UART")
---
 Documentation/devicetree/bindings/serial/mvebu-uart.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
index b7e0e32b9ac6..2d0dbdf32d1d 100644
--- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
@@ -5,10 +5,10 @@ Required properties:
 - compatible:
     - "marvell,armada-3700-uart" for the standard variant of the UART
       (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the
-      FIFO, baudrate limited to 230400).
+      FIFO), called also UART1.
     - "marvell,armada-3700-uart-ext" for the extended variant of the
       UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit
-      accesses to the FIFO, baudrate unlimited by the dividers).
+      accesses to the FIFO), called also UART2.
 - reg: offset and length of the register set for the device.
 - clocks: UART reference clock used to derive the baudrate. If no clock
       is provided (possible only with the "marvell,armada-3700-uart"
@@ -33,7 +33,7 @@ Required properties:
 Example:
 	uart0: serial@12000 {
 		compatible = "marvell,armada-3700-uart";
-		reg = <0x12000 0x200>;
+		reg = <0x12000 0x18>;
 		clocks = <&xtalclk>;
 		interrupts =
 		<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.20.1


  parent reply	other threads:[~2021-06-25 14:37 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-24 22:48 [PATCH 00/10] serial: mvebu-uart: Fixes and new support for higher baudrates Pali Rohár
2021-06-24 22:49 ` [PATCH 01/10] serial: mvebu-uart: fix calculation of clock divisor Pali Rohár
2021-06-24 22:49 ` [PATCH 02/10] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available Pali Rohár
2021-06-24 22:49 ` [PATCH 03/10] serial: mvebu-uart: correctly calculate minimal possible baudrate Pali Rohár
2021-06-24 22:49 ` [PATCH 04/10] dt-bindings: mvebu-uart: fix documentation Pali Rohár
2021-06-24 22:49 ` [PATCH 05/10] arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART Pali Rohár
2021-06-24 22:49 ` [PATCH 06/10] serial: mvebu-uart: remove unused member nb from struct mvebu_uart Pali Rohár
2021-06-24 22:49 ` [PATCH 07/10] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-06-24 22:49 ` [PATCH 08/10] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-06-24 22:49 ` [PATCH 09/10] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-06-24 22:49 ` [PATCH 10/10] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-06-25 14:36 ` [PATCH v2 00/11] serial: mvebu-uart: Fixes and new support for higher baudrates Pali Rohár
2021-06-25 14:36   ` [PATCH v2 01/11] serial: mvebu-uart: fix calculation of clock divisor Pali Rohár
2021-06-25 14:36   ` [PATCH v2 02/11] serial: mvebu-uart: do not allow changing baudrate when uartclk is not available Pali Rohár
2021-06-25 14:36   ` [PATCH v2 03/11] serial: mvebu-uart: correctly calculate minimal possible baudrate Pali Rohár
2021-06-25 14:36   ` Pali Rohár [this message]
2021-06-25 14:36   ` [PATCH v2 05/11] arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART Pali Rohár
2021-06-25 14:36   ` [PATCH v2 06/11] serial: mvebu-uart: remove unused member nb from struct mvebu_uart Pali Rohár
2021-06-25 14:36   ` [PATCH v2 07/11] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-06-25 15:22     ` Geert Uytterhoeven
2021-06-25 15:38       ` Pali Rohár
2021-06-25 15:50         ` Willy Tarreau
2021-06-25 17:39           ` Geert Uytterhoeven
2021-06-25 17:44             ` Pali Rohár
2021-06-25 18:11               ` Geert Uytterhoeven
2021-07-19 12:45         ` Andy Shevchenko
2021-06-25 14:36   ` [PATCH v2 08/11] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-06-25 14:36   ` [PATCH v2 09/11] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-06-25 14:36   ` [PATCH v2 10/11] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-06-25 14:36   ` [PATCH v2 11/11] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-07-17 12:38 ` [PATCH v3 0/5] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-07-17 12:38   ` [PATCH v3 1/5] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-07-19 12:47     ` Andy Shevchenko
2021-07-22 21:57       ` Pali Rohár
2021-07-24 11:38         ` David Laight
2021-07-17 12:38   ` [PATCH v3 2/5] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-07-17 17:26     ` Andrew Lunn
2021-07-17 18:05       ` Pali Rohár
2021-07-24  9:48         ` Pali Rohár
2021-07-24 16:33           ` Andrew Lunn
2021-07-25 12:14             ` Pali Rohár
2021-07-17 12:38   ` [PATCH v3 3/5] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-07-17 17:30     ` [PATCH v3 3/5] dt-bindings: mvebu-uart: document DT bindings for marvell, armada-3700-uart-clock Andrew Lunn
2021-08-02 14:45       ` Pali Rohár
2021-07-17 12:38   ` [PATCH v3 4/5] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-07-17 12:38   ` [PATCH v3 5/5] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-08-02 14:45 ` [PATCH v4 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-08-02 14:45   ` [PATCH v4 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-08-02 14:45   ` [PATCH v4 2/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-08-02 14:45   ` [PATCH v4 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-08-06  0:30     ` Stephen Boyd
2021-08-06  8:28       ` Pali Rohár
2021-08-12 19:33         ` Stephen Boyd
2021-08-12 20:08           ` Pali Rohár
2021-08-02 14:45   ` [PATCH v4 4/6] dt-bindings: mvebu-uart: update information about UART clock Pali Rohár
2021-08-02 14:45   ` [PATCH v4 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-08-02 14:45   ` [PATCH v4 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-08-09 14:53 ` [PATCH v5 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-08-09 14:53   ` [PATCH v5 1/6] math64: New DIV_U64_ROUND_CLOSEST helper Pali Rohár
2021-08-09 14:53   ` [PATCH v5 2/6] serial: mvebu-uart: implement UART clock driver for configuring UART base clock Pali Rohár
2021-08-09 14:53   ` [PATCH v5 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock Pali Rohár
2021-08-09 14:53   ` [PATCH v5 4/6] dt-bindings: mvebu-uart: update information about UART clock Pali Rohár
2021-08-09 14:53   ` [PATCH v5 5/6] arm64: dts: marvell: armada-37xx: add device node for UART clock and use it Pali Rohár
2021-08-09 14:53   ` [PATCH v5 6/6] serial: mvebu-uart: implement support for baudrates higher than 230400 Pali Rohár
2021-08-20 17:22   ` [PATCH v5 0/6] serial: mvebu-uart: Support for higher baudrates Pali Rohár
2021-08-31  8:35     ` Pali Rohár
2021-09-21  7:41       ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210625143617.12826-5-pali@kernel.org \
    --to=pali@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gregory.clement@bootlin.com \
    --cc=kabel@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=vladimir.vid@sartura.hr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).