From: Sherry Sun <sherry.sun@nxp.com>
To: gregkh@linuxfoundation.org, jirislaby@kernel.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-imx@nxp.com
Subject: [PATCH] tty: serial: fsl_lpuart: enable two stop bits for lpuart32
Date: Mon, 23 Aug 2021 16:17:33 +0800 [thread overview]
Message-ID: <20210823081733.31941-1-sherry.sun@nxp.com> (raw)
From: Fugang Duan <fugang.duan@nxp.com>
Add two stop bits support.
User can run the command to enable two stop bits for test:
stty cstopb -F /dev/ttyLPx
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
drivers/tty/serial/fsl_lpuart.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 117e011aff5f..55097e068908 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2049,11 +2049,12 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
unsigned long flags;
- unsigned long ctrl, old_ctrl, modem;
+ unsigned long ctrl, old_ctrl, bd, modem;
unsigned int baud;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
ctrl = old_ctrl = lpuart32_read(&sport->port, UARTCTRL);
+ bd = lpuart32_read(&sport->port, UARTBAUD);
modem = lpuart32_read(&sport->port, UARTMODIR);
/*
* only support CS8 and CS7, and for CS7 must enable PE.
@@ -2097,7 +2098,9 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
}
if (termios->c_cflag & CSTOPB)
- termios->c_cflag &= ~CSTOPB;
+ bd |= UARTBAUD_SBNS;
+ else
+ bd &= ~UARTBAUD_SBNS;
/* parity must be enabled when CS7 to match 8-bits format */
if ((termios->c_cflag & CSIZE) == CS7)
@@ -2167,6 +2170,7 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
lpuart32_write(&sport->port, old_ctrl & ~(UARTCTRL_TE | UARTCTRL_RE),
UARTCTRL);
+ lpuart32_write(&sport->port, bd, UARTBAUD);
lpuart32_serial_setbrg(sport, baud);
lpuart32_write(&sport->port, modem, UARTMODIR);
lpuart32_write(&sport->port, ctrl, UARTCTRL);
--
2.17.1
reply other threads:[~2021-08-23 8:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210823081733.31941-1-sherry.sun@nxp.com \
--to=sherry.sun@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).