From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-serial@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 4/6] serial: 8250: Add IIR FIFOs enabled field properly
Date: Thu, 24 Nov 2022 14:59:46 +0200 [thread overview]
Message-ID: <20221124125948.23432-5-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20221124125948.23432-1-ilpo.jarvinen@linux.intel.com>
Don't use magic literals & comments but define a real field instead
for UART_IIR_FIFO_ENABLED and name also the values.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/tty/serial/8250/8250_port.c | 17 +++++++----------
include/uapi/linux/serial_reg.h | 4 ++++
2 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index e79bf2afd9be..6d343b15bc58 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1293,22 +1293,19 @@ static void autoconfig(struct uart_8250_port *up)
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- /* Assign this as it is to truncate any bits above 7. */
- scratch = serial_in(up, UART_IIR);
-
- switch (scratch >> 6) {
- case 0:
+ switch (serial_in(up, UART_IIR) & UART_IIR_FIFO_ENABLED) {
+ case UART_IIR_FIFO_ENABLED_8250:
autoconfig_8250(up);
break;
- case 1:
- port->type = PORT_UNKNOWN;
- break;
- case 2:
+ case UART_IIR_FIFO_EAABLED_16550:
port->type = PORT_16550;
break;
- case 3:
+ case UART_IIR_FIFO_ENABLED_16550A:
autoconfig_16550a(up);
break;
+ default:
+ port->type = PORT_UNKNOWN;
+ break;
}
#ifdef CONFIG_SERIAL_8250_RSA
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index bab3b39266cc..a63c124b7fdc 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -44,6 +44,10 @@
#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
+#define UART_IIR_FIFO_ENABLED 0xc0 /* FIFOs enabled / port type identification */
+#define UART_IIR_FIFO_ENABLED_8250 0x00 /* 8250: no FIFO */
+#define UART_IIR_FIFO_EAABLED_16550 0x80 /* 16550: (broken/unusable) FIFO */
+#define UART_IIR_FIFO_ENABLED_16550A 0xc0 /* 16550A: FIFO enabled */
#define UART_FCR 2 /* Out: FIFO Control Register */
#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
--
2.30.2
next prev parent reply other threads:[~2022-11-24 13:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-24 12:59 [PATCH 0/6] serial: Cleanup literals Ilpo Järvinen
2022-11-24 12:59 ` [PATCH 1/6] serial: 8250: Use defined IER bits Ilpo Järvinen
2022-11-24 12:59 ` [PATCH 2/6] serial: 8250: Name MSR literals Ilpo Järvinen
2022-11-24 12:59 ` [PATCH 3/6] serial: 8250: Cleanup MCR literals Ilpo Järvinen
2022-11-24 12:59 ` Ilpo Järvinen [this message]
2022-11-25 11:08 ` [PATCH 4/6] serial: 8250: Add IIR FIFOs enabled field properly Jiri Slaby
2022-11-24 12:59 ` [PATCH 5/6] serial: 8250: Define IIR 64 byte bit & cleanup related code Ilpo Järvinen
2022-11-24 12:59 ` [PATCH 6/6] serial: 8250_early: Convert literals to use defines Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221124125948.23432-5-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).