Linux-Serial Archive on lore.kernel.org
 help / color / Atom feed
[PATCH AUTOSEL 4.4 165/174] tty: serial: imx: use the sg count from dma_map_sg
 2020-01-16 17:42 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH AUTOSEL 4.4 166/174] tty: serial: pch_uart: correct usage of dma_unmap_sg

[PATCH AUTOSEL 4.9 146/251] serial: stm32: fix transmit_chars when tx is stopped
 2020-01-16 17:36 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH AUTOSEL 4.9 240/251] tty: serial: imx: use the sg count from dma_map_sg
` [PATCH AUTOSEL 4.9 241/251] tty: serial: pch_uart: correct usage of dma_unmap_sg

[PATCH AUTOSEL 4.14 212/371] serial: stm32: fix rx error handling
 2020-01-16 17:24 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH AUTOSEL 4.14 213/371] serial: stm32: fix transmit_chars when tx is stopped
` [PATCH AUTOSEL 4.14 214/371] serial: stm32: Add support of TC bit status check
` [PATCH AUTOSEL 4.14 215/371] serial: stm32: fix wakeup source initialization
` [PATCH AUTOSEL 4.14 288/371] tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs
` [PATCH AUTOSEL 4.14 351/371] tty: serial: imx: use the sg count from dma_map_sg
` [PATCH AUTOSEL 4.14 352/371] tty: serial: pch_uart: correct usage of dma_unmap_sg
` [PATCH AUTOSEL 4.14 371/371] serial: stm32: fix clearing interrupt error flags

[tty:tty-testing] BUILD SUCCESS 7788f549ed8cfbecd75c10e1a1988812adba49d8
 2020-01-16 17:08 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.19 374/671] serial: stm32: fix rx error handling
 2020-01-16 17:05 UTC  (10+ messages) - mbox.gz / Atom
` [PATCH AUTOSEL 4.19 375/671] serial: stm32: fix rx data length when parity enabled
` [PATCH AUTOSEL 4.19 376/671] serial: stm32: fix transmit_chars when tx is stopped
` [PATCH AUTOSEL 4.19 377/671] serial: stm32: Add support of TC bit status check
` [PATCH AUTOSEL 4.19 378/671] serial: stm32: fix wakeup source initialization
` [PATCH AUTOSEL 4.19 402/671] serial: stm32: fix a recursive locking in stm32_config_rs485
` [PATCH AUTOSEL 4.19 527/671] tty: serial: fsl_lpuart: Use appropriate lpuart32_* I/O funcs
` [PATCH AUTOSEL 4.19 645/671] tty: serial: imx: use the sg count from dma_map_sg
` [PATCH AUTOSEL 4.19 646/671] tty: serial: pch_uart: correct usage of dma_unmap_sg
` [PATCH AUTOSEL 4.19 670/671] serial: stm32: fix clearing interrupt error flags

[PATCH AUTOSEL 5.4 138/205] tty: serial: imx: use the sg count from dma_map_sg
 2020-01-16 16:41 UTC  - mbox.gz / Atom

[PATCH 0/6] Raspberry Pi auxiliary UART fixes & cleanups
 2020-01-16 16:11 UTC  (12+ messages) - mbox.gz / Atom
` [PATCH 1/6] serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
` [PATCH 2/6] serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
` [PATCH 3/6] serial: 8250_bcm2835aux: Suppress register_port "
` [PATCH 4/6] serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
` [PATCH 5/6] serial: 8250_bcm2835aux: Use generic remapping code
` [PATCH 6/6] serial: 8250_bcm2835aux: Document struct bcm2835aux_data

[PATCH] tty: serial: amba-pl011: added RS485 support
 2020-01-16 13:29 UTC  (4+ messages) - mbox.gz / Atom

[PATCH-next 0/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
 2020-01-15 12:42 UTC  (22+ messages) - mbox.gz / Atom
` [PATCH-next 1/3] serial_core: Move sysrq functions from header file
` [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
` [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE

[PATCHv2-next 0/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
 2020-01-15 12:40 UTC  (14+ messages) - mbox.gz / Atom
` [PATCHv2-next 1/3] sysctl/sysrq: Remove __sysrq_enabled copy
` [PATCHv2-next 2/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
` [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port

[PATCH] tty: serial: msm_serial: RX SW/FIFO mode fallback
 2020-01-14 15:50 UTC  (4+ messages) - mbox.gz / Atom

[PATCH 0/2] Convert STM32 UART bindings to yaml
 2020-01-14 12:33 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 1/2] dt-bindings: serial: Convert rs485 bindings to json-schema
` [PATCH 2/2] dt-bindings: serial: Convert STM32 UART "

[PATCH v1 0/2] NVIDIA Tegra serial driver improvements
 2020-01-12 18:09 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v1 1/2] tty: serial: tegra: Activate RX DMA transfer by request
` [PATCH v1 2/2] tty: serial: tegra: Optimize DMA buffer synchronization

Investment opportunity
 2020-01-12  5:00 UTC  - mbox.gz / Atom

Investment opportunity
 2020-01-11 23:46 UTC  - mbox.gz / Atom

[GIT PULL] TTY/Serial driver fixes for 5.5-rc6
 2020-01-11 14:45 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] serial: 8250: Support disabling mdelay-filled probes of 16550A variants
 2020-01-11  2:25 UTC  - mbox.gz / Atom

[PATCH v12 0/3] Use MFD framework for SGI IOC3 drivers
 2020-01-10 19:25 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH v12 3/3] mfd: ioc3: Add driver for SGI IOC3 chip

[GIT PULL] TTY/Serial driver fixes for 5.5-rc3
 2020-01-10 10:37 UTC  (7+ messages) - mbox.gz / Atom

[PATCH v1 0/3] Add virtual serial null modem emulation driver
 2020-01-10  7:42 UTC  (15+ messages) - mbox.gz / Atom
` [PATCH v1 1/3] dt-bindings: ttyvs: document serial null modem driver dt bindings
` [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
` [PATCH v1 3/3] tty: documentation: abi: add ttyvs null modem driver sysfs nodes

[PATCH] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data
 2020-01-09  8:52 UTC  (5+ messages) - mbox.gz / Atom

4.12 mainline crash in n_tty_receive_buf_common when using g_serial
 2020-01-08 13:43 UTC  (4+ messages) - mbox.gz / Atom

BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
 2020-01-07 17:02 UTC  (12+ messages) - mbox.gz / Atom

[PATCHv2] serial: uartps: Add monitoring TACTIVE bit in set_termios
 2020-01-07 12:51 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] serial: uartps: Add monitoring TACTIVE bit in set_termios
 2020-01-07 11:55 UTC  - mbox.gz / Atom

[PATCH v5 0/3] tty/leds: implement a trigger for ttys
 2020-01-07  9:34 UTC  (10+ messages) - mbox.gz / Atom
` [PATCH v5 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
` [PATCH v5 2/3] tty: new helper function tty_get_icount()
` [PATCH v5 3/3] leds: trigger: implement a tty trigger

[PATCH 1/2] tty: serial_core: Export uart_console_device so it can be used by modules
 2020-01-07  6:14 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH 2/2] tty: serial: Kconfig: Allow SERIAL_QCOM_GENI_CONSOLE to be enabled if SERIAL_QCOM_GENI is a module

[PATCH] tty: st-asc: switch to using devm_gpiod_get()
 2020-01-06 22:38 UTC  (3+ messages) - mbox.gz / Atom

[PATCH V8 0/2] Cleanup wakeup IRQ and move loopback to TIOCM_LOOP
 2020-01-06 14:45 UTC  (3+ messages) - mbox.gz / Atom
` [PATCH V8 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
` [PATCH V8 2/2] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP

[PATCH] serdev: Don't claim unsupported ACPI serial devices
 2020-01-06  8:10 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v2 17/20] serial: samsung: Rename Exynos to lowercase
 2020-01-04 15:21 UTC  - mbox.gz / Atom

[PATCH] tty: st-asc: switch to using devm_fwnode_gpiod_get()
 2020-01-04  4:52 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 16/19] serial: samsung: Rename Exynos to lowercase
 2020-01-03 17:11 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.4 09/25] tty: serial: msm_serial: Fix lockup for sysrq and oops
 2019-12-27 18:15 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.9 16/38] tty: serial: msm_serial: Fix lockup for sysrq and oops
 2019-12-27 18:14 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.14 26/57] tty: serial: msm_serial: Fix lockup for sysrq and oops
 2019-12-27 18:01 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 4.19 39/84] tty: serial: msm_serial: Fix lockup for sysrq and oops
 2019-12-27 17:43 UTC  - mbox.gz / Atom

[PATCH AUTOSEL 5.4 084/187] tty: serial: msm_serial: Fix lockup for sysrq and oops
 2019-12-27 17:39 UTC  - mbox.gz / Atom

[PATCH v2 0/2] tty: serial: msm_serial: Fix lockup issues
 2019-12-27  6:44 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
` [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output

possible deadlock in uart_write
 2019-12-26 21:25 UTC  - mbox.gz / Atom

[PATCH v4 0/3] tty/leds: implement a trigger for ttys
 2019-12-23  9:58 UTC  (4+ messages) - mbox.gz / Atom

[PATCH] serial: ucc_uart: remove redundant assignment to pointer bdp
 2019-12-20 14:20 UTC  (2+ messages) - mbox.gz / Atom

[PATCH V2 0/3] tty: serial: lpuart: cleanup and improve for earlycon
 2019-12-20  6:13 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH V2 1/3] tty: serial: fsl_lpuart: drop EARLYCON_DECLARE
` [PATCH V2 2/3] tty: serial: fsl_lpuart: support UPIO_MEM32 for lpuart32
` [PATCH V2 3/3] tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP

[tty:tty-testing 23/75] drivers/tty/serial/21285.c:44:41: error: subscripted value is neither array nor pointer nor vector
 2019-12-19 18:27 UTC  (3+ messages) - mbox.gz / Atom

[PATCH 0/3] tty: serial: lpuart: cleanup and improve for earlycon
 2019-12-19 16:43 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH 2/3] tty: serial: lpuart: support UPIO_MEM32 for lpuart32

[PATCH] tty: serial: 21285: stop using the unused[] variable from struct uart_port
 2019-12-19 14:51 UTC  (2+ messages) - mbox.gz / Atom
` [PATCH v2] "

[PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
 2019-12-19 10:28 UTC  (7+ messages) - mbox.gz / Atom

[PATCH v11 net-next 0/2] Use MFD framework for SGI IOC3 drivers
 2019-12-19  9:35 UTC  (4+ messages) - mbox.gz / Atom
` [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip

[PATCH 01/10] tty: serial: samsung: allow driver to be built by anyone
 2019-12-19  9:25 UTC  (7+ messages) - mbox.gz / Atom
` [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'

[PATCH] serdev: Don't claim unsupported serial devices
 2019-12-19  8:58 UTC  (11+ messages) - mbox.gz / Atom

[PATCH v3 0/3] tty/leds: implement a trigger for ttys
 2019-12-18 21:33 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH v3 3/3] leds: trigger: implement a tty trigger

[PATCH] Revert "serdev: simplify Makefile"
 2019-12-18 16:33 UTC  (3+ messages) - mbox.gz / Atom

page:   latest

Linux-Serial Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-serial/0 linux-serial/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-serial linux-serial/ https://lore.kernel.org/linux-serial \
		linux-serial@vger.kernel.org
	public-inbox-index linux-serial

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-serial


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git