Re: [RESEND PATCH v5 3/6] dt-bindings: mvebu-uart: document DT bindings for marvell,armada-3700-uart-clock

[Rob Herring <robh+dt@kernel.org>]

On Wed, Sep 22, 2021 at 5:56 AM Pali Rohár <pali@kernel.org> wrote:
>
> This change adds DT bindings documentation for device nodes with compatible
> string "marvell,armada-3700-uart-clock".

Please resend to the DT list so that checks run and this gets reviewed
in a timely manner.

> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>  .../bindings/clock/armada3700-uart-clock.yaml | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/armada3700-uart-clock.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/armada3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/armada3700-uart-clock.yaml
> new file mode 100644
> index 000000000000..5bdb23e0ba3e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/armada3700-uart-clock.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license. checkpatch will tell you which ones.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +title: Marvell Armada 3720 UART clocks
> +
> +properties:
> +  compatible:
> +    const: marvell,armada-3700-uart-clock
> +
> +  reg:
> +    items:
> +      - description: UART Clock Control Register
> +      - description: UART 2 Baud Rate Divisor Register
> +
> +  clocks:
> +    description: |
> +      List of parent clocks suitable for UART from following set:
> +        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
> +      UART clock can use one from this set and when more are provided
> +      then kernel would choose and configure the most suitable one.
> +      It is suggest to specify at least one TBG clock to achieve
> +      baudrates above 230400 and also to specify clock which bootloader
> +      used for UART (most probably xtal) for smooth boot log on UART.
> +
> +  clock-names:
> +    items:
> +      - const: TBG-A-P
> +      - const: TBG-B-P
> +      - const: TBG-A-S
> +      - const: TBG-B-S
> +      - const: xtal
> +    minItems: 1
> +    maxItems: 5

Don't need maxItems equal to length of 'items'.

> +
> +  '#clock-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    uartclk: uartclk@12000 {

clock-controller@12010

> +      compatible = "marvell,armada-3700-uart-clock";
> +      reg = <0x12010 0x4>, <0x12210 0x4>;

However, looks like this is part of some other block. The whole block
needs a binding (or at least the parent and whatever sub-functions you
know about).
> +      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
> +      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
> +      #clock-cells = <1>;
> +    };
> --
> 2.20.1
>