[PATCH v2 1/4] serial: 8250: Avoid error message on reprobe

[Lukas Wunner <lukas@wunner.de>]

If the call to uart_add_one_port() in serial8250_register_8250_port()
fails, a half-initialized entry in the serial_8250ports[] array is left
behind.

A subsequent reprobe of the same serial port causes that entry to be
reused.  Because uart->port.dev is set, uart_remove_one_port() is called
for the half-initialized entry and bails out with an error message:

bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval)

The same happens on failure of mctrl_gpio_init() since commit
4a96895f74c9 ("tty/serial/8250: use mctrl_gpio helpers").

Fix by zeroing the uart->port.dev pointer in the probe error path.

The bug was introduced in v2.6.10 by historical commit befff6f5bf5f
("[SERIAL] Add new port registration/unregistration functions."):
https://git.kernel.org/tglx/history/c/befff6f5bf5f

The commit added an unconditional call to uart_remove_one_port() in
serial8250_register_port().  In v3.7, commit 835d844d1a28 ("8250_pnp:
do pnp probe before legacy probe") made that call conditional on
uart->port.dev which allows me to fix the issue by zeroing that pointer
in the error path.  Thus, the present commit will fix the problem as far
back as v3.7 whereas still older versions need to also cherry-pick
835d844d1a28.

Fixes: 835d844d1a28 ("8250_pnp: do pnp probe before legacy probe")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.10
Cc: stable@vger.kernel.org # v2.6.10: 835d844d1a28: 8250_pnp: do pnp probe before legacy
---
Changes v1 -> v2:
* Drop unnecessary "else" after "if ... goto" statement. (Andy)
* Document applicability to older kernels in commit message. (Andy)
* Add Fixes tag. (Andy)

 drivers/tty/serial/8250/8250_core.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 45d9117cab68..9548d3f8fc8e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1040,7 +1040,7 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 			gpios = mctrl_gpio_init(&uart->port, 0);
 			if (IS_ERR(gpios)) {
 				ret = PTR_ERR(gpios);
-				goto out_unlock;
+				goto err;
 			} else {
 				uart->gpios = gpios;
 			}
@@ -1089,8 +1089,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 			serial8250_apply_quirks(uart);
 			ret = uart_add_one_port(&serial8250_reg,
 						&uart->port);
-			if (ret == 0)
-				ret = uart->port.line;
+			if (ret)
+				goto err;
+
+			ret = uart->port.line;
 		} else {
 			dev_info(uart->port.dev,
 				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
@@ -1112,10 +1114,14 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
 		}
 	}
 
-out_unlock:
 	mutex_unlock(&serial_mutex);
 
 	return ret;
+
+err:
+	uart->port.dev = NULL;
+	mutex_unlock(&serial_mutex);
+	return ret;
 }
 EXPORT_SYMBOL(serial8250_register_8250_port);
 
-- 
2.26.2