Linux-Sgx Archive on lore.kernel.org
 help / color / Atom feed
From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: x86@kernel.org, linux-sgx@vger.kernel.org
Cc: akpm@linux-foundation.org, dave.hansen@intel.com,
	sean.j.christopherson@intel.com, nhorman@redhat.com,
	npmccallum@redhat.com, serge.ayoun@intel.com,
	shay.katz-zamir@intel.com, haitao.huang@intel.com,
	andriy.shevchenko@linux.intel.com, tglx@linutronix.de,
	kai.svahn@intel.com, bp@alien8.de, josh@joshtriplett.org,
	luto@kernel.org, kai.huang@intel.com, rientjes@google.com,
	Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Subject: [PATCH v19 13/27] x86/sgx: Add wrappers for ENCLS leaf functions
Date: Sun, 17 Mar 2019 23:14:42 +0200
Message-ID: <20190317211456.13927-14-jarkko.sakkinen@linux.intel.com> (raw)
In-Reply-To: <20190317211456.13927-1-jarkko.sakkinen@linux.intel.com>

ENCLS is an umbrella instruction for a variety of cpl0 SGX functions.
The ENCLS function that is executed is specified in EAX, with each
function potentially having more leaf-specific operands beyond EAX.
ENCLS introduces its own (positive value) error codes that (some)
leafs use to return failure information in EAX.  Leafs that return
an error code also modify RFLAGS.  And finally, ENCLS generates
ENCLS-specific non-fatal #GPs and #PFs, i.e. a bug-free kernel may
encounter faults on ENCLS that must be handled gracefully.

Because of the complexity involved in encoding ENCLS and handling its
assortment of failure paths, executing any given leaf is not a simple
matter of emitting ENCLS.

To enable adding support for ENCLS leafs with minimal fuss, add a
two-layer macro system along with an encoding scheme to allow wrappers
to return trap numbers along ENCLS-specific error codes.  The bottom
layer of the macro system splits between the leafs that return an
error code and those that do not.  The second layer generates the
correct input/output annotations based on the number of operands for
each leaf function.

Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Co-developed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
 arch/x86/kernel/cpu/sgx/Makefile |   2 +-
 arch/x86/kernel/cpu/sgx/encls.c  |  21 +++
 arch/x86/kernel/cpu/sgx/encls.h  | 244 +++++++++++++++++++++++++++++++
 3 files changed, 266 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/kernel/cpu/sgx/encls.c
 create mode 100644 arch/x86/kernel/cpu/sgx/encls.h

diff --git a/arch/x86/kernel/cpu/sgx/Makefile b/arch/x86/kernel/cpu/sgx/Makefile
index b666967fd570..20ce33655ff4 100644
--- a/arch/x86/kernel/cpu/sgx/Makefile
+++ b/arch/x86/kernel/cpu/sgx/Makefile
@@ -1 +1 @@
-obj-y += main.o
+obj-y += main.o encls.o
diff --git a/arch/x86/kernel/cpu/sgx/encls.c b/arch/x86/kernel/cpu/sgx/encls.c
new file mode 100644
index 000000000000..5045f1365e07
--- /dev/null
+++ b/arch/x86/kernel/cpu/sgx/encls.c
@@ -0,0 +1,21 @@
+#include <asm/cpufeature.h>
+#include <asm/traps.h>
+#include "encls.h"
+#include "sgx.h"
+
+/**
+ * encls_failed() - Check if an ENCLS leaf function failed
+ * @ret:	the return value of an ENCLS leaf function call
+ *
+ * Check if an ENCLS leaf function failed. This is a condition where the leaf
+ * function causes a fault that is not caused by an EPCM conflict.
+ *
+ * Return: true if there was a fault other than an EPCM conflict
+ */
+bool encls_failed(int ret)
+{
+	int epcm_trapnr = boot_cpu_has(X86_FEATURE_SGX2) ?
+			  X86_TRAP_PF : X86_TRAP_GP;
+
+	return encls_faulted(ret) && ENCLS_TRAPNR(ret) != epcm_trapnr;
+}
diff --git a/arch/x86/kernel/cpu/sgx/encls.h b/arch/x86/kernel/cpu/sgx/encls.h
new file mode 100644
index 000000000000..aea3b9d09936
--- /dev/null
+++ b/arch/x86/kernel/cpu/sgx/encls.h
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
+#ifndef _X86_ENCLS_H
+#define _X86_ENCLS_H
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/rwsem.h>
+#include <linux/types.h>
+#include <asm/asm.h>
+#include "arch.h"
+
+/**
+ * ENCLS_FAULT_FLAG - flag signifying an ENCLS return code is a trapnr
+ *
+ * ENCLS has its own (positive value) error codes and also generates
+ * ENCLS specific #GP and #PF faults.  And the ENCLS values get munged
+ * with system error codes as everything percolates back up the stack.
+ * Unfortunately (for us), we need to precisely identify each unique
+ * error code, e.g. the action taken if EWB fails varies based on the
+ * type of fault and on the exact SGX error code, i.e. we can't simply
+ * convert all faults to -EFAULT.
+ *
+ * To make all three error types coexist, we set bit 30 to identify an
+ * ENCLS fault.  Bit 31 (technically bits N:31) is used to differentiate
+ * between positive (faults and SGX error codes) and negative (system
+ * error codes) values.
+ */
+#define ENCLS_FAULT_FLAG 0x40000000
+
+/**
+ * Retrieve the encoded trapnr from the specified return code.
+ */
+#define ENCLS_TRAPNR(r) ((r) & ~ENCLS_FAULT_FLAG)
+
+/* Issue a WARN() about an ENCLS leaf. */
+#define ENCLS_WARN(r, name) {						\
+	do {								\
+		int _r = (r);						\
+		WARN(_r, "sgx: %s returned %d (0x%x)\n", (name), _r,	\
+		     _r);						\
+	} while (0);							\
+}
+
+/**
+ * encls_faulted() - Check if ENCLS leaf function faulted
+ * @ret:	the return value of an ENCLS leaf function call
+ *
+ * Return: true if the fault flag is set
+ */
+static inline bool encls_faulted(int ret)
+{
+	return (ret & ENCLS_FAULT_FLAG) != 0;
+}
+
+/**
+ * encls_returned_code() - Check if an ENCLS leaf function returned a code
+ * @ret:	the return value of an ENCLS leaf function call
+ *
+ * Check if an ENCLS leaf function returned an error or information code.
+ *
+ * Return: true if there was a fault other than an EPCM conflict
+ */
+static inline bool encls_returned_code(int ret)
+{
+	return !encls_faulted(ret) && ret;
+}
+
+bool encls_failed(int ret);
+
+/**
+ * __encls_ret_N - encode an ENCLS leaf that returns an error code in EAX
+ * @rax:	leaf number
+ * @inputs:	asm inputs for the leaf
+ *
+ * Emit assembly for an ENCLS leaf that returns an error code, e.g. EREMOVE.
+ * And because SGX isn't complex enough as it is, leafs that return an error
+ * code also modify flags.
+ *
+ * Return:
+ *	0 on success,
+ *	SGX error code on failure
+ */
+#define __encls_ret_N(rax, inputs...)				\
+	({							\
+	int ret;						\
+	asm volatile(						\
+	"1: .byte 0x0f, 0x01, 0xcf;\n\t"			\
+	"2:\n"							\
+	".section .fixup,\"ax\"\n"				\
+	"3: orl $"__stringify(ENCLS_FAULT_FLAG)",%%eax\n"	\
+	"   jmp 2b\n"						\
+	".previous\n"						\
+	_ASM_EXTABLE_FAULT(1b, 3b)				\
+	: "=a"(ret)						\
+	: "a"(rax), inputs					\
+	: "memory", "cc");					\
+	ret;							\
+	})
+
+#define __encls_ret_1(rax, rcx)		\
+	({				\
+	__encls_ret_N(rax, "c"(rcx));	\
+	})
+
+#define __encls_ret_2(rax, rbx, rcx)		\
+	({					\
+	__encls_ret_N(rax, "b"(rbx), "c"(rcx));	\
+	})
+
+#define __encls_ret_3(rax, rbx, rcx, rdx)			\
+	({							\
+	__encls_ret_N(rax, "b"(rbx), "c"(rcx), "d"(rdx));	\
+	})
+
+/**
+ * __encls_N - encode an ENCLS leaf that doesn't return an error code
+ * @rax:	leaf number
+ * @rbx_out:	optional output variable
+ * @inputs:	asm inputs for the leaf
+ *
+ * Emit assembly for an ENCLS leaf that does not return an error code,
+ * e.g. ECREATE.  Leaves without error codes either succeed or fault.
+ * @rbx_out is an optional parameter for use by EDGBRD, which returns
+ * the the requested value in RBX.
+ *
+ * Return:
+ *   0 on success,
+ *   trapnr with ENCLS_FAULT_FLAG set on fault
+ */
+#define __encls_N(rax, rbx_out, inputs...)			\
+	({							\
+	int ret;						\
+	asm volatile(						\
+	"1: .byte 0x0f, 0x01, 0xcf;\n\t"			\
+	"   xor %%eax,%%eax;\n"					\
+	"2:\n"							\
+	".section .fixup,\"ax\"\n"				\
+	"3: orl $"__stringify(ENCLS_FAULT_FLAG)",%%eax\n"	\
+	"   jmp 2b\n"						\
+	".previous\n"						\
+	_ASM_EXTABLE_FAULT(1b, 3b)				\
+	: "=a"(ret), "=b"(rbx_out)				\
+	: "a"(rax), inputs					\
+	: "memory");						\
+	ret;							\
+	})
+
+#define __encls_2(rax, rbx, rcx)				\
+	({							\
+	unsigned long ign_rbx_out;				\
+	__encls_N(rax, ign_rbx_out, "b"(rbx), "c"(rcx));	\
+	})
+
+#define __encls_1_1(rax, data, rcx)			\
+	({						\
+	unsigned long rbx_out;				\
+	int ret = __encls_N(rax, rbx_out, "c"(rcx));	\
+	if (!ret)					\
+		data = rbx_out;				\
+	ret;						\
+	})
+
+static inline int __ecreate(struct sgx_pageinfo *pginfo, void *secs)
+{
+	return __encls_2(SGX_ECREATE, pginfo, secs);
+}
+
+static inline int __eextend(void *secs, void *addr)
+{
+	return __encls_2(SGX_EEXTEND, secs, addr);
+}
+
+static inline int __eadd(struct sgx_pageinfo *pginfo, void *addr)
+{
+	return __encls_2(SGX_EADD, pginfo, addr);
+}
+
+static inline int __einit(void *sigstruct, struct sgx_einittoken *einittoken,
+			  void *secs)
+{
+	return __encls_ret_3(SGX_EINIT, sigstruct, secs, einittoken);
+}
+
+static inline int __eremove(void *addr)
+{
+	return __encls_ret_1(SGX_EREMOVE, addr);
+}
+
+static inline int __edbgwr(void *addr, unsigned long *data)
+{
+	return __encls_2(SGX_EDGBWR, *data, addr);
+}
+
+static inline int __edbgrd(void *addr, unsigned long *data)
+{
+	return __encls_1_1(SGX_EDGBRD, *data, addr);
+}
+
+static inline int __etrack(void *addr)
+{
+	return __encls_ret_1(SGX_ETRACK, addr);
+}
+
+static inline int __eldu(struct sgx_pageinfo *pginfo, void *addr,
+			 void *va)
+{
+	return __encls_ret_3(SGX_ELDU, pginfo, addr, va);
+}
+
+static inline int __eblock(void *addr)
+{
+	return __encls_ret_1(SGX_EBLOCK, addr);
+}
+
+static inline int __epa(void *addr)
+{
+	unsigned long rbx = SGX_PAGE_TYPE_VA;
+
+	return __encls_2(SGX_EPA, rbx, addr);
+}
+
+static inline int __ewb(struct sgx_pageinfo *pginfo, void *addr,
+			void *va)
+{
+	return __encls_ret_3(SGX_EWB, pginfo, addr, va);
+}
+
+static inline int __eaug(struct sgx_pageinfo *pginfo, void *addr)
+{
+	return __encls_2(SGX_EAUG, pginfo, addr);
+}
+
+static inline int __emodpr(struct sgx_secinfo *secinfo, void *addr)
+{
+	return __encls_ret_2(SGX_EMODPR, secinfo, addr);
+}
+
+static inline int __emodt(struct sgx_secinfo *secinfo, void *addr)
+{
+	return __encls_ret_2(SGX_EMODT, secinfo, addr);
+}
+
+#endif /* _X86_ENCLS_H */
-- 
2.19.1


  parent reply index

Thread overview: 92+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-17 21:14 [PATCH v19 00/27] Intel SGX1 support Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 01/27] x86/cpufeatures: Add Intel-defined SGX feature bit Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 02/27] x86/cpufeatures: Add SGX sub-features (as Linux-defined bits) Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 03/27] x86/msr: Add IA32_FEATURE_CONTROL.SGX_ENABLE definition Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 04/27] x86/cpufeatures: Add Intel-defined SGX_LC feature bit Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 05/27] x86/msr: Add SGX Launch Control MSR definitions Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 06/27] x86/mm: x86/sgx: Add new 'PF_SGX' page fault error code bit Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 07/27] x86/mm: x86/sgx: Signal SIGSEGV for userspace #PFs w/ PF_SGX Jarkko Sakkinen
2019-03-18 17:15   ` Dave Hansen
2019-03-18 19:53     ` Sean Christopherson
2019-03-17 21:14 ` [PATCH v19 08/27] x86/cpu/intel: Detect SGX support and update caps appropriately Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 09/27] x86/sgx: Add ENCLS architectural error codes Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 10/27] x86/sgx: Add SGX1 and SGX2 architectural data structures Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 11/27] x86/sgx: Add definitions for SGX's CPUID leaf and variable sub-leafs Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 12/27] x86/sgx: Enumerate and track EPC sections Jarkko Sakkinen
2019-03-18 19:50   ` Sean Christopherson
2019-03-21 14:40     ` Jarkko Sakkinen
2019-03-21 15:28       ` Sean Christopherson
2019-03-22 10:19         ` Jarkko Sakkinen
2019-03-22 10:50           ` Jarkko Sakkinen
2019-03-17 21:14 ` Jarkko Sakkinen [this message]
2019-03-19 19:59   ` [PATCH v19 13/27] x86/sgx: Add wrappers for ENCLS leaf functions Sean Christopherson
2019-03-21 14:51     ` Jarkko Sakkinen
2019-03-21 15:40       ` Sean Christopherson
2019-03-22 11:00         ` Jarkko Sakkinen
2019-03-22 16:43           ` Sean Christopherson
2019-03-17 21:14 ` [PATCH v19 16/27] x86/sgx: Add the Linux SGX Enclave Driver Jarkko Sakkinen
2019-03-19 21:19   ` Sean Christopherson
2019-03-21 15:51     ` Jarkko Sakkinen
2019-03-21 16:47       ` Sean Christopherson
2019-03-22 11:10         ` Jarkko Sakkinen
2019-03-26 13:26       ` Jarkko Sakkinen
2019-03-26 23:58         ` Sean Christopherson
2019-03-27  5:28           ` Jarkko Sakkinen
2019-03-27 17:57             ` Sean Christopherson
2019-03-27 18:38             ` Jethro Beekman
2019-03-27 20:06               ` Sean Christopherson
2019-03-28  1:21                 ` Jethro Beekman
2019-03-28 13:19                 ` Jarkko Sakkinen
2019-03-28 19:05                   ` Andy Lutomirski
2019-03-29  9:43                     ` Jarkko Sakkinen
2019-03-29 16:20                     ` Sean Christopherson
2019-04-01 10:01                       ` Jarkko Sakkinen
2019-04-01 17:25                         ` Jethro Beekman
2019-04-01 22:57                           ` Jarkko Sakkinen
2019-03-28 13:15               ` Jarkko Sakkinen
2019-03-19 23:00   ` Sean Christopherson
2019-03-21 16:18     ` Jarkko Sakkinen
2019-03-21 17:38       ` Sean Christopherson
2019-03-22 11:17         ` Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 17/27] x86/sgx: Add provisioning Jarkko Sakkinen
2019-03-19 20:09   ` Sean Christopherson
2019-03-21  2:08     ` Huang, Kai
2019-03-21 14:32       ` Jarkko Sakkinen
2019-03-21 21:41         ` Huang, Kai
2019-03-22 11:31           ` Jarkko Sakkinen
2019-03-21 14:30     ` Jarkko Sakkinen
2019-03-21 14:38   ` Nathaniel McCallum
2019-03-22 11:22     ` Jarkko Sakkinen
2019-03-21 16:50   ` Andy Lutomirski
2019-03-22 11:29     ` Jarkko Sakkinen
2019-03-22 11:43       ` Jarkko Sakkinen
2019-03-22 18:20         ` Andy Lutomirski
2019-03-25 14:55           ` Jarkko Sakkinen
2019-03-27  0:14             ` Sean Christopherson
2019-04-05 10:18             ` Jarkko Sakkinen
2019-04-05 13:53               ` Andy Lutomirski
2019-04-05 14:20                 ` Jarkko Sakkinen
2019-04-05 14:34                   ` Greg KH
2019-04-09 13:37                     ` Jarkko Sakkinen
2019-04-05 14:21                 ` Greg KH
2019-03-17 21:14 ` [PATCH v19 19/27] x86/sgx: ptrace() support for the SGX driver Jarkko Sakkinen
2019-03-19 22:22   ` Sean Christopherson
2019-03-21 15:02     ` Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 20/27] x86/vdso: Add support for exception fixup in vDSO functions Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 21/27] x86/fault: Add helper function to sanitize error code Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 22/27] x86/fault: Attempt to fixup unhandled #PF in vDSO before signaling Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 23/27] x86/traps: Attempt to fixup exceptions " Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 25/27] x86/sgx: SGX documentation Jarkko Sakkinen
2019-03-20 17:14   ` Sean Christopherson
2019-03-21 16:24     ` Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 26/27] selftests/x86: Add a selftest for SGX Jarkko Sakkinen
2019-03-17 21:14 ` [PATCH v19 27/27] x86/sgx: Update MAINTAINERS Jarkko Sakkinen
2019-03-19 17:12   ` Sean Christopherson
2019-03-21 14:42     ` Jarkko Sakkinen
     [not found] ` <20190317211456.13927-19-jarkko.sakkinen@linux.intel.com>
2019-03-19 22:09   ` [PATCH v19 18/27] x86/sgx: Add swapping code to the core and SGX driver Sean Christopherson
2019-03-21 14:59     ` Jarkko Sakkinen
2019-03-19 23:41 ` [PATCH v19 00/27] Intel SGX1 support Sean Christopherson
2019-03-19 23:52   ` Jethro Beekman
2019-03-20  0:22     ` Sean Christopherson
2019-03-21 16:20     ` Jarkko Sakkinen
2019-03-21 16:00   ` Jarkko Sakkinen

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190317211456.13927-14-jarkko.sakkinen@linux.intel.com \
    --to=jarkko.sakkinen@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@intel.com \
    --cc=haitao.huang@intel.com \
    --cc=josh@joshtriplett.org \
    --cc=kai.huang@intel.com \
    --cc=kai.svahn@intel.com \
    --cc=linux-sgx@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=nhorman@redhat.com \
    --cc=npmccallum@redhat.com \
    --cc=rientjes@google.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=serge.ayoun@intel.com \
    --cc=shay.katz-zamir@intel.com \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Sgx Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-sgx/0 linux-sgx/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-sgx linux-sgx/ https://lore.kernel.org/linux-sgx \
		linux-sgx@vger.kernel.org linux-sgx@archiver.kernel.org
	public-inbox-index linux-sgx


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-sgx


AGPL code for this site: git clone https://public-inbox.org/ public-inbox