Linux-sh Archive on
 help / color / Atom feed
From: Yusuke Goda <>
Subject: USB boot problems submission
Date: Mon, 25 Jan 2010 05:46:01 +0000
Message-ID: <> (raw)

[-- Attachment #1: Type: text/plain, Size: 490 bytes --]

Hi Paul san

When I set rootfs in USB memory,
the latest kernel seems to have a problem.
Please refer to log for the error.
(AP3300(ap325rxa) is the same phenomenon, too.)

- NFS boots both boards normally.
- Both boards were confirmed a USB boot in the old kernel.
  (2.6.27 and 2.6.31-rc7)
- rootfs is made by Debian and uses the following things.

Do you recognize this problem?


[-- Attachment #2: ecovec-usbboot.log --]
[-- Type: text/plain, Size: 8541 bytes --]

## Starting application at 0x89000000 ...
Linux version 2.6.33-rc4 (root@gohda) (gcc version 4.3.4 (Debian 4.3.4-1) ) #10 PREEMPT Mon Jan 25 05:15:59 UTC 2010
Boot params:
... MOUNT_ROOT_RDONLY - 00000000
... RAMDISK_FLAGS     - 00000000
... ORIG_ROOT_DEV     - 00000000
... LOADER_TYPE       - 00000000
... INITRD_START      - 00000000
... INITRD_SIZE       - 00000000
Booting machvec: R0P7724 (EcoVec)
Node 0: start_pfn = 0x8000, low = 0xf800
Zone PFN ranges:
  Normal   0x00008000 -> 0x0000f800
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00008000 -> 0x0000f800
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 30480
Kernel command line: console=tty0, console=ttySC0,115200 root=/dev/sda2 rootdelay=10 mem=120M memchunk.vpu=4m
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
PVR=10300b00 CVR=7144040d PRR=00002200
I-cache : n_ways=4 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=4 n_sets=256 way_incr=8192
D-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
S-cache : n_ways=4 n_sets=2048 way_incr=65536
S-cache : entry_mask=0x0000ffe0 alias_mask=0x0000f000 n_aliases=16
Memory: 118400k/122880k available (2241k kernel code, 776k data, 108k init)
virtual kernel memory layout:
    fixmap  : 0xdffd6000 - 0xdffff000   ( 164 kB)
    vmalloc : 0xc0000000 - 0xdffd4000   ( 511 MB)
    lowmem  : 0x88000000 - 0x8f800000   ( 120 MB) (cached)
            : 0xa8000000 - 0xc8000000   ( 512 MB) (uncached)
      .init : 0x882f4000 - 0x8830f000   ( 108 kB)
      .data : 0x88231590 - 0x882f36c0   ( 776 kB)
      .text : 0x88001000 - 0x88231590   (2241 kB)
Hierarchical RCU implementation.
NR_IRQS:256 nr_irqs:256
Console: colour dummy device 80x25
console [tty0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop (skipped)... 499.99 BogoMIPS PRESET (lpj=999999)
Mount-cache hash table entries: 512
CPU: SH7724
NET: Registered protocol family 16
vpu: forcing memory chunk size to 0x00400000
sh pinmux: sh7724_pfc handling gpio 0 -> 486
Performance Events: SH-4A support registered
HW Breakpoints: SH-4A UBC support registered
USB1 function is selected
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996
msgmni has been set to 231
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Console: switching to colour frame buffer device 100x30
graphics fb0: registered sh_mobile_lcdc_fb/mainlcd as 800x480 16bpp.
SuperH SCI(F) driver initialized
sh-sci.0: ttySC0 at MMIO 0xffe00000 (irq = 80) is a scif
console [ttySC0] enabled
sh-sci.1: ttySC1 at MMIO 0xffe10000 (irq = 81) is a scif
sh-sci.2: ttySC2 at MMIO 0xffe20000 (irq = 82) is a scif
sh-sci.3: ttySC3 at MMIO 0xa4e30000 (irq = 56) is a scifa
sh-sci.4: ttySC4 at MMIO 0xa4e40000 (irq = 88) is a scifa
sh-sci.5: ttySC5 at MMIO 0xa4e50000 (irq = 109) is a scifa
brd: module loaded
physmap platform flash device: 04000000 at 00000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
physmap-flash.0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
RedBoot partition parsing not available
Using physmap partition information
Creating 2 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000500000 : "boot loader"
0x000000500000-0x000004000000 : "free-area"
sh_mii: probed
Base address at 0xa4600000, 00:00:87:6B:BC:B0, IRQ 91.
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
r8a66597_hcd r8a66597_hcd.0: USB Host Controller
r8a66597_hcd r8a66597_hcd.0: new USB bus registered, assigned bus number 1
r8a66597_hcd r8a66597_hcd.0: irq 65, io base 0xa4d80000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: sh_keysc as /class/input/input0
i2c /dev entries driver
Linux video capture interface: v2.00
camera 0-0: Probing 0-0
sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver attached to camera 0
sh_mobile_ceu sh_mobile_ceu.0: SuperH Mobile CEU driver detached from camera 0
camera: probe of 0-0 failed with error -12
camera 1-0: Probing 1-0
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver attached to camera 0
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver detached from camera 0
camera: probe of 1-0 failed with error -12
camera 1-1: Probing 1-1
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver attached to camera 1
sh_mobile_ceu sh_mobile_ceu.1: SuperH Mobile CEU driver detached from camera 1
camera: probe of 1-1 failed with error -12
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
heartbeat: version 0.1.2 loaded
TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Waiting 10sec before mounting root device...
usb 1-1: new high speed USB device using r8a66597_hcd and address 2
scsi0 : usb-storage 1-1:1.0
scsi 0:0:0:0: Direct-Access     I-O DATA USB Flash Disk   3A   PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 4014080 512-byte logical blocks: (2.05 GB/1.91 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 8:2.
Freeing unused kernel memory: 108k freed
Kernel panic - not syncing: Attempted to kill init!
Stack: (0x8f01de3c to 0x8f01e000)
de20:                                                                8822dac8 
de40: 881190d4 88266d44 8f01de68 88019256 8f0f4580 8f01fd60 8f01def0 8f01acc0 
de60: 8f01acc0 882d22f0 8f01acb8 00000000 8f01de4c 00000004 00000001 00000000 
de80: 8f01de80 8f01de80 88019840 000000fc 8f0f4580 8f01fd60 8f01def0 00000003 
dea0: 00000004 8f01fd60 88022b8e 00000003 8f0f45c0 8f01dfa4 8f01df70 880050aa 
dec0: 7b80fd18 8f01dfa4 29583004 00000008 88006464 880070ec 29583004 00000002 
dee0: 8f01aef0 8f01acc0 8f104d40 8f104d74 00000004 00000000 00000080 00000000 
df00: 00000000 00000000 00000000 00000000 8818ecd4 00000100 8818e700 8f11b4e0 
df20: 88013e9a 8f01df30 8f11a8f8 00000001 000000f0 880212ca 00000000 00000000 
df40: 8f01acc0 00000004 8f01af08 8f11a8f8 00000001 880213be 7b80fd18 00000001 
df60: 00000004 8f0f4580 00000000 8f01acc0 00000003 00000000 88006484 00400034 
df80: 8800648e 8800713c 7b80fd18 00400034 29583004 00000008 88006464 880070ec 
dfa0: 8f01c000 00000078 00000000 004020c0 00008384 2956fca8 2956fca8 00000000 
dfc0: 00000000 29583050 ffffff38 fffffe10 00000008 29583004 00400034 7b80fd18 
dfe0: 7b80fd10 295609c0 2955863c 00008000 00000000 000000d8 0000006c ffffffff 

Call trace:
 [<881190d4>] 0x881190d4
 [<88019256>] 0x88019256
 [<88019840>] 0x88019840
 [<88022b8e>] 0x88022b8e
 [<880050aa>] 0x880050aa
 [<88006464>] 0x88006464
 [<880070ec>] 0x880070ec
 [<8818ecd4>] 0x8818ecd4
 [<8818e700>] 0x8818e700
 [<88013e9a>] 0x88013e9a
 [<880212ca>] 0x880212ca
 [<880213be>] 0x880213be
 [<88006484>] 0x88006484
 [<8800648e>] 0x8800648e
 [<8800713c>] 0x8800713c
 [<88006464>] 0x88006464
 [<880070ec>] 0x880070ec

             reply index

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-01-25  5:46 Yusuke Goda [this message]
2010-01-25 15:20 ` Paul Mundt
2010-01-26  8:33 ` Yusuke Goda
2010-01-26  8:54 ` Paul Mundt
2010-01-26  9:24 ` Yusuke Goda
2010-01-26  9:26 ` Paul Mundt
2010-01-26  9:42 ` Yusuke Goda
2010-02-02  7:00 ` Paul Mundt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-sh Archive on

Archives are clonable:
	git clone --mirror linux-sh/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-sh linux-sh/ \
	public-inbox-index linux-sh

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone