* [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 15:42 ` Rob Herring
2021-03-30 17:27 ` Daniel Walker
2021-03-26 13:44 ` [PATCH v3 02/17] drivers: of: use cmdline building function Christophe Leroy
` (16 subsequent siblings)
17 siblings, 2 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This code provides architectures with a way to build command line
based on what is built in the kernel and what is handed over by the
bootloader, based on selected compile-time options.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v3:
- Addressed comments from Will
- Added capability to have src == dst
---
include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
create mode 100644 include/linux/cmdline.h
diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
new file mode 100644
index 000000000000..dea87edd41be
--- /dev/null
+++ b/include/linux/cmdline.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_CMDLINE_H
+#define _LINUX_CMDLINE_H
+
+#include <linux/string.h>
+
+/* Allow architectures to override strlcat, powerpc can't use strings so early */
+#ifndef cmdline_strlcat
+#define cmdline_strlcat strlcat
+#endif
+
+/*
+ * This function will append or prepend a builtin command line to the command
+ * line provided by the bootloader. Kconfig options can be used to alter
+ * the behavior of this builtin command line.
+ * @dst: The destination of the final appended/prepended string.
+ * @src: The starting string or NULL if there isn't one.
+ * @len: the length of dest buffer.
+ */
+static __always_inline void __cmdline_build(char *dst, const char *src, size_t len)
+{
+ if (!len || src == dst)
+ return;
+
+ if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) {
+ dst[0] = 0;
+ cmdline_strlcat(dst, CONFIG_CMDLINE, len);
+ return;
+ }
+
+ if (dst != src)
+ dst[0] = 0;
+
+ if (IS_ENABLED(CONFIG_CMDLINE_PREPEND))
+ cmdline_strlcat(dst, CONFIG_CMDLINE " ", len);
+
+ cmdline_strlcat(dst, src, len);
+
+ if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+ cmdline_strlcat(dst, " " CONFIG_CMDLINE, len);
+}
+
+#define cmdline_build(dst, src, len) do { \
+ char *__c_dst = (dst); \
+ const char *__c_src = (src); \
+ \
+ if (__c_src == __c_dst) { \
+ static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \
+ \
+ cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \
+ __cmdline_build(__c_dst, __c_tmp, (len)); \
+ } else { \
+ __cmdline_build(__c_dst, __c_src, (len)); \
+ } \
+} while (0)
+
+#endif /* _LINUX_CMDLINE_H */
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-26 13:44 ` [PATCH v3 01/17] cmdline: Add generic function to build command line Christophe Leroy
@ 2021-03-26 15:42 ` Rob Herring
2021-03-26 15:55 ` Christophe Leroy
2021-04-02 15:23 ` Christophe Leroy
2021-03-30 17:27 ` Daniel Walker
1 sibling, 2 replies; 40+ messages in thread
From: Rob Herring @ 2021-03-26 15:42 UTC (permalink / raw)
To: Christophe Leroy
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
>
> This code provides architectures with a way to build command line
> based on what is built in the kernel and what is handed over by the
> bootloader, based on selected compile-time options.
Note that I have this patch pending:
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210316193820.3137-1-alex@ghiti.fr/
It's going to need to be adapted for this. I've held off applying to
see if this gets settled.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> v3:
> - Addressed comments from Will
> - Added capability to have src == dst
> ---
> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 include/linux/cmdline.h
>
> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
> new file mode 100644
> index 000000000000..dea87edd41be
> --- /dev/null
> +++ b/include/linux/cmdline.h
> @@ -0,0 +1,57 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _LINUX_CMDLINE_H
> +#define _LINUX_CMDLINE_H
> +
> +#include <linux/string.h>
> +
> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
> +#ifndef cmdline_strlcat
> +#define cmdline_strlcat strlcat
> +#endif
> +
> +/*
> + * This function will append or prepend a builtin command line to the command
> + * line provided by the bootloader. Kconfig options can be used to alter
> + * the behavior of this builtin command line.
> + * @dst: The destination of the final appended/prepended string.
> + * @src: The starting string or NULL if there isn't one.
> + * @len: the length of dest buffer.
> + */
> +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len)
> +{
> + if (!len || src == dst)
> + return;
> +
> + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) {
> + dst[0] = 0;
> + cmdline_strlcat(dst, CONFIG_CMDLINE, len);
> + return;
> + }
> +
> + if (dst != src)
> + dst[0] = 0;
> +
> + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND))
> + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len);
> +
> + cmdline_strlcat(dst, src, len);
> +
> + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
Should be APPEND.
> + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len);
> +}
> +
> +#define cmdline_build(dst, src, len) do { \
Perhaps a comment why we need this to be a define.
> + char *__c_dst = (dst); \
> + const char *__c_src = (src); \
> + \
> + if (__c_src == __c_dst) { \
> + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \
> + \
> + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \
> + __cmdline_build(__c_dst, __c_tmp, (len)); \
> + } else { \
> + __cmdline_build(__c_dst, __c_src, (len)); \
> + } \
> +} while (0)
> +
> +#endif /* _LINUX_CMDLINE_H */
> --
> 2.25.0
>
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-26 15:42 ` Rob Herring
@ 2021-03-26 15:55 ` Christophe Leroy
2021-04-02 15:23 ` Christophe Leroy
1 sibling, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 15:55 UTC (permalink / raw)
To: Rob Herring
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:42, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>> This code provides architectures with a way to build command line
>> based on what is built in the kernel and what is handed over by the
>> bootloader, based on selected compile-time options.
>
> Note that I have this patch pending:
>
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210316193820.3137-1-alex@ghiti.fr/
>
> It's going to need to be adapted for this. I've held off applying to
> see if this gets settled.
good point.
Hope we can't have things like
option="beautiful weather"
>
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> v3:
>> - Addressed comments from Will
>> - Added capability to have src == dst
>> ---
>> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 include/linux/cmdline.h
>>
>> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
>> new file mode 100644
>> index 000000000000..dea87edd41be
>> --- /dev/null
>> +++ b/include/linux/cmdline.h
>> @@ -0,0 +1,57 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _LINUX_CMDLINE_H
>> +#define _LINUX_CMDLINE_H
>> +
>> +#include <linux/string.h>
>> +
>> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
>> +#ifndef cmdline_strlcat
>> +#define cmdline_strlcat strlcat
>> +#endif
>> +
>> +/*
>> + * This function will append or prepend a builtin command line to the command
>> + * line provided by the bootloader. Kconfig options can be used to alter
>> + * the behavior of this builtin command line.
>> + * @dst: The destination of the final appended/prepended string.
>> + * @src: The starting string or NULL if there isn't one.
>> + * @len: the length of dest buffer.
>> + */
>> +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len)
>> +{
>> + if (!len || src == dst)
>> + return;
>> +
>> + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) {
>> + dst[0] = 0;
>> + cmdline_strlcat(dst, CONFIG_CMDLINE, len);
>> + return;
>> + }
>> +
>> + if (dst != src)
>> + dst[0] = 0;
>> +
>> + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND))
>> + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len);
>> +
>> + cmdline_strlcat(dst, src, len);
>> +
>> + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
>
> Should be APPEND.
Not yet. For the time being all architectures use EXTEND only.
In patch 3 it is changed to:
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+ if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || IS_ENABLED(CONFIG_CMDLINE_APPEND))
Then in last patch, I forgot but I should have done:
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || IS_ENABLED(CONFIG_CMDLINE_APPEND))
+ if (IS_ENABLED(CONFIG_CMDLINE_APPEND))
>
>> + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len);
>> +}
>> +
>> +#define cmdline_build(dst, src, len) do { \
>
> Perhaps a comment why we need this to be a define.
Probably we don't need anymore as I finally decided to use COMMAND_LINE_SIZE instead of 'len' as the
size of the temporary buffer.
>
>> + char *__c_dst = (dst); \
>> + const char *__c_src = (src); \
>> + \
>> + if (__c_src == __c_dst) { \
>> + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \
>> + \
>> + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \
>> + __cmdline_build(__c_dst, __c_tmp, (len)); \
>> + } else { \
>> + __cmdline_build(__c_dst, __c_src, (len)); \
>> + } \
>> +} while (0)
>> +
>> +#endif /* _LINUX_CMDLINE_H */
>> --
>> 2.25.0
>>
Christophe
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-26 15:42 ` Rob Herring
2021-03-26 15:55 ` Christophe Leroy
@ 2021-04-02 15:23 ` Christophe Leroy
1 sibling, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:23 UTC (permalink / raw)
To: Rob Herring
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:42, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>> This code provides architectures with a way to build command line
>> based on what is built in the kernel and what is handed over by the
>> bootloader, based on selected compile-time options.
>
> Note that I have this patch pending:
>
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20210316193820.3137-1-alex@ghiti.fr/
>
> It's going to need to be adapted for this. I've held off applying to
> see if this gets settled.
When reworking EFI, I found out that they are a similar handling, which in addition takes care of
space inside quotes.
I added something similar now in cmdline_build() function.
>
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> v3:
>> - Addressed comments from Will
>> - Added capability to have src == dst
>> ---
>> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 include/linux/cmdline.h
>>
>> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
>> new file mode 100644
>> index 000000000000..dea87edd41be
>> --- /dev/null
>> +++ b/include/linux/cmdline.h
>> @@ -0,0 +1,57 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _LINUX_CMDLINE_H
>> +#define _LINUX_CMDLINE_H
>> +
>> +#include <linux/string.h>
>> +
>> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
>> +#ifndef cmdline_strlcat
>> +#define cmdline_strlcat strlcat
>> +#endif
>> +
>> +/*
>> + * This function will append or prepend a builtin command line to the command
>> + * line provided by the bootloader. Kconfig options can be used to alter
>> + * the behavior of this builtin command line.
>> + * @dst: The destination of the final appended/prepended string.
>> + * @src: The starting string or NULL if there isn't one.
>> + * @len: the length of dest buffer.
>> + */
>> +static __always_inline void __cmdline_build(char *dst, const char *src, size_t len)
>> +{
>> + if (!len || src == dst)
>> + return;
>> +
>> + if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !src) {
>> + dst[0] = 0;
>> + cmdline_strlcat(dst, CONFIG_CMDLINE, len);
>> + return;
>> + }
>> +
>> + if (dst != src)
>> + dst[0] = 0;
>> +
>> + if (IS_ENABLED(CONFIG_CMDLINE_PREPEND))
>> + cmdline_strlcat(dst, CONFIG_CMDLINE " ", len);
>> +
>> + cmdline_strlcat(dst, src, len);
>> +
>> + if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
>
> Should be APPEND.
>
>> + cmdline_strlcat(dst, " " CONFIG_CMDLINE, len);
>> +}
>> +
>> +#define cmdline_build(dst, src, len) do { \
>
> Perhaps a comment why we need this to be a define.
>
>> + char *__c_dst = (dst); \
>> + const char *__c_src = (src); \
>> + \
>> + if (__c_src == __c_dst) { \
>> + static char __c_tmp[COMMAND_LINE_SIZE] __initdata = ""; \
>> + \
>> + cmdline_strlcat(__c_tmp, __c_src, COMMAND_LINE_SIZE); \
>> + __cmdline_build(__c_dst, __c_tmp, (len)); \
>> + } else { \
>> + __cmdline_build(__c_dst, __c_src, (len)); \
>> + } \
>> +} while (0)
>> +
>> +#endif /* _LINUX_CMDLINE_H */
>> --
>> 2.25.0
>>
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-26 13:44 ` [PATCH v3 01/17] cmdline: Add generic function to build command line Christophe Leroy
2021-03-26 15:42 ` Rob Herring
@ 2021-03-30 17:27 ` Daniel Walker
2021-03-30 18:07 ` H. Nikolaus Schaller
2021-04-02 15:33 ` Christophe Leroy
1 sibling, 2 replies; 40+ messages in thread
From: Daniel Walker @ 2021-03-30 17:27 UTC (permalink / raw)
To: Christophe Leroy
Cc: will, robh, daniel, linux-arch, devicetree, linuxppc-dev,
linux-kernel, linux-arm-kernel, microblaze, linux-mips, nios2,
openrisc, linux-hexagon, linux-riscv, x86, linux-xtensa,
linux-sh, sparclinux
On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote:
> This code provides architectures with a way to build command line
> based on what is built in the kernel and what is handed over by the
> bootloader, based on selected compile-time options.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> v3:
> - Addressed comments from Will
> - Added capability to have src == dst
> ---
> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 include/linux/cmdline.h
>
> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
> new file mode 100644
> index 000000000000..dea87edd41be
> --- /dev/null
> +++ b/include/linux/cmdline.h
> @@ -0,0 +1,57 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _LINUX_CMDLINE_H
> +#define _LINUX_CMDLINE_H
> +
> +#include <linux/string.h>
> +
> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
> +#ifndef cmdline_strlcat
> +#define cmdline_strlcat strlcat
> +#endif
> +
> +/*
> + * This function will append or prepend a builtin command line to the command
> + * line provided by the bootloader. Kconfig options can be used to alter
> + * the behavior of this builtin command line.
> + * @dst: The destination of the final appended/prepended string.
> + * @src: The starting string or NULL if there isn't one.
> + * @len: the length of dest buffer.
> + */
Append or prepend ? Cisco requires both at the same time. This is why my
implementation provides both. I can't use this with both at once.
Daniel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-30 17:27 ` Daniel Walker
@ 2021-03-30 18:07 ` H. Nikolaus Schaller
2021-03-30 18:23 ` Daniel Walker
2021-04-02 15:33 ` Christophe Leroy
1 sibling, 1 reply; 40+ messages in thread
From: H. Nikolaus Schaller @ 2021-03-30 18:07 UTC (permalink / raw)
To: Daniel Walker, Christophe Leroy
Cc: will, Rob Herring, daniel, linux-arch, devicetree, linuxppc-dev,
Linux Kernel Mailing List, linux-arm-kernel, microblaze,
linux-mips, nios2, openrisc, linux-hexagon, linux-riscv, x86,
linux-xtensa, linux-sh, sparclinux
> Am 30.03.2021 um 19:27 schrieb Daniel Walker <danielwa@cisco.com>:
>
> On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote:
>> This code provides architectures with a way to build command line
>> based on what is built in the kernel and what is handed over by the
>> bootloader, based on selected compile-time options.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> v3:
>> - Addressed comments from Will
>> - Added capability to have src == dst
>> ---
>> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 include/linux/cmdline.h
>>
>> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
>> new file mode 100644
>> index 000000000000..dea87edd41be
>> --- /dev/null
>> +++ b/include/linux/cmdline.h
>> @@ -0,0 +1,57 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _LINUX_CMDLINE_H
>> +#define _LINUX_CMDLINE_H
>> +
>> +#include <linux/string.h>
>> +
>> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
>> +#ifndef cmdline_strlcat
>> +#define cmdline_strlcat strlcat
>> +#endif
>> +
>> +/*
>> + * This function will append or prepend a builtin command line to the command
>> + * line provided by the bootloader. Kconfig options can be used to alter
>> + * the behavior of this builtin command line.
>> + * @dst: The destination of the final appended/prepended string.
>> + * @src: The starting string or NULL if there isn't one.
>> + * @len: the length of dest buffer.
>> + */
>
> Append or prepend ? Cisco requires both at the same time. This is why my
> implementation provides both. I can't use this with both at once.
Just an idea: what about defining CMDLINE as a pattern where e.g. "$$" or "%%"
is replaced by the boot loader command line?
Then you can formulate replace, prepend, append, prepend+append with a single
CONFIG setting.
It may be a little more complex in code (scanning for the pattern and replacing
it and take care to temporary memory) but IMHO it could be worth to consider.
BR,
Nikolaus Schaller
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-30 18:07 ` H. Nikolaus Schaller
@ 2021-03-30 18:23 ` Daniel Walker
0 siblings, 0 replies; 40+ messages in thread
From: Daniel Walker @ 2021-03-30 18:23 UTC (permalink / raw)
To: H. Nikolaus Schaller
Cc: Christophe Leroy, will, Rob Herring, daniel, linux-arch,
devicetree, linuxppc-dev, Linux Kernel Mailing List,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
On Tue, Mar 30, 2021 at 08:07:30PM +0200, H. Nikolaus Schaller wrote:
>
> > Am 30.03.2021 um 19:27 schrieb Daniel Walker <danielwa@cisco.com>:
> >
> > On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote:
> >> This code provides architectures with a way to build command line
> >> based on what is built in the kernel and what is handed over by the
> >> bootloader, based on selected compile-time options.
> >>
> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> >> ---
> >> v3:
> >> - Addressed comments from Will
> >> - Added capability to have src == dst
> >> ---
> >> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
> >> 1 file changed, 57 insertions(+)
> >> create mode 100644 include/linux/cmdline.h
> >>
> >> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
> >> new file mode 100644
> >> index 000000000000..dea87edd41be
> >> --- /dev/null
> >> +++ b/include/linux/cmdline.h
> >> @@ -0,0 +1,57 @@
> >> +/* SPDX-License-Identifier: GPL-2.0 */
> >> +#ifndef _LINUX_CMDLINE_H
> >> +#define _LINUX_CMDLINE_H
> >> +
> >> +#include <linux/string.h>
> >> +
> >> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
> >> +#ifndef cmdline_strlcat
> >> +#define cmdline_strlcat strlcat
> >> +#endif
> >> +
> >> +/*
> >> + * This function will append or prepend a builtin command line to the command
> >> + * line provided by the bootloader. Kconfig options can be used to alter
> >> + * the behavior of this builtin command line.
> >> + * @dst: The destination of the final appended/prepended string.
> >> + * @src: The starting string or NULL if there isn't one.
> >> + * @len: the length of dest buffer.
> >> + */
> >
> > Append or prepend ? Cisco requires both at the same time. This is why my
> > implementation provides both. I can't use this with both at once.
>
> Just an idea: what about defining CMDLINE as a pattern where e.g. "$$" or "%%"
> is replaced by the boot loader command line?
>
> Then you can formulate replace, prepend, append, prepend+append with a single
> CONFIG setting.
>
> It may be a little more complex in code (scanning for the pattern and replacing
> it and take care to temporary memory) but IMHO it could be worth to consider.
In some cases this code could be used extremely early in boot up. For example in the
prom_init.c powerpc code, or in efi changes. The flexibility to find and replace
like that is not always an option due to the nature of the environment. It's not
impossible of course.
Daniel
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 01/17] cmdline: Add generic function to build command line.
2021-03-30 17:27 ` Daniel Walker
2021-03-30 18:07 ` H. Nikolaus Schaller
@ 2021-04-02 15:33 ` Christophe Leroy
1 sibling, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:33 UTC (permalink / raw)
To: Daniel Walker
Cc: will, robh, daniel, linux-arch, devicetree, linuxppc-dev,
linux-kernel, linux-arm-kernel, microblaze, linux-mips, nios2,
openrisc, linux-hexagon, linux-riscv, x86, linux-xtensa,
linux-sh, sparclinux, Andrew Morton
Le 30/03/2021 à 19:27, Daniel Walker a écrit :
> On Fri, Mar 26, 2021 at 01:44:48PM +0000, Christophe Leroy wrote:
>> This code provides architectures with a way to build command line
>> based on what is built in the kernel and what is handed over by the
>> bootloader, based on selected compile-time options.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> v3:
>> - Addressed comments from Will
>> - Added capability to have src == dst
>> ---
>> include/linux/cmdline.h | 57 +++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 57 insertions(+)
>> create mode 100644 include/linux/cmdline.h
>>
>> diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
>> new file mode 100644
>> index 000000000000..dea87edd41be
>> --- /dev/null
>> +++ b/include/linux/cmdline.h
>> @@ -0,0 +1,57 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +#ifndef _LINUX_CMDLINE_H
>> +#define _LINUX_CMDLINE_H
>> +
>> +#include <linux/string.h>
>> +
>> +/* Allow architectures to override strlcat, powerpc can't use strings so early */
>> +#ifndef cmdline_strlcat
>> +#define cmdline_strlcat strlcat
>> +#endif
>> +
>> +/*
>> + * This function will append or prepend a builtin command line to the command
>> + * line provided by the bootloader. Kconfig options can be used to alter
>> + * the behavior of this builtin command line.
>> + * @dst: The destination of the final appended/prepended string.
>> + * @src: The starting string or NULL if there isn't one.
>> + * @len: the length of dest buffer.
>> + */
>
> Append or prepend ? Cisco requires both at the same time. This is why my
> implementation provides both. I can't use this with both at once.
>
I think it can be added as a second step if dimmed necessary. The feeling I have from all the
discussion is that it's not what people from the community are looking for at the moment.
Anyway, once all architectures are moved to generic handling, I believe it is then easier to split
CONFIG_CMDLINE in two configuration items in order to provide both appending and prepending at the
same time.
I see some concerns about risk of double changes, but I have focussed in changing as little as
possible the existing configuration items, in order to minimise that.
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 02/17] drivers: of: use cmdline building function
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 01/17] cmdline: Add generic function to build command line Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 03/17] cmdline: Gives architectures opportunity to use generically defined boot cmdline manipulation Christophe Leroy
` (15 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This patch uses the new cmdline building function to
concatenate the of provided cmdline with built-in parts
based on compile-time options.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
drivers/of/fdt.c | 23 ++++-------------------
1 file changed, 4 insertions(+), 19 deletions(-)
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index dcc1dd96911a..cf2b95b8f298 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -25,6 +25,7 @@
#include <linux/serial_core.h>
#include <linux/sysfs.h>
#include <linux/random.h>
+#include <linux/cmdline.h>
#include <asm/setup.h> /* for COMMAND_LINE_SIZE */
#include <asm/page.h>
@@ -1050,26 +1051,10 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
/* Retrieve command line */
p = of_get_flat_dt_prop(node, "bootargs", &l);
- if (p != NULL && l > 0)
- strlcpy(data, p, min(l, COMMAND_LINE_SIZE));
+ if (l <= 0)
+ p = NULL;
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
- * managed to set the command line, unless CONFIG_CMDLINE_FORCE
- * is set in which case we override whatever was found earlier.
- */
-#ifdef CONFIG_CMDLINE
-#if defined(CONFIG_CMDLINE_EXTEND)
- strlcat(data, " ", COMMAND_LINE_SIZE);
- strlcat(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
- strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#else
- /* No arguments from boot loader, use kernel's cmdl*/
- if (!((char *)data)[0])
- strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif /* CONFIG_CMDLINE */
+ cmdline_build(data, p, COMMAND_LINE_SIZE);
pr_debug("Command line is: %s\n", (char *)data);
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 03/17] cmdline: Gives architectures opportunity to use generically defined boot cmdline manipulation
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 01/17] cmdline: Add generic function to build command line Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 02/17] drivers: of: use cmdline building function Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 04/17] powerpc: Convert to GENERIC_CMDLINE Christophe Leroy
` (14 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
Most architectures have similar boot command line manipulation
options. This patchs adds the definition in init/Kconfig, gated by
CONFIG_HAVE_CMDLINE that the architectures can select to use them.
CONFIG_CMDLINE_EXTEND is understood differently by architectures.
For some of them it appends built-in CMDLINE to bootloader provided
line. For others it appends the bootloader provided CMDLINE to the
built-in one.
To avoid confusion, this commit brings to different options:
- CONFIG_CMDLINE_APPEND to append the built-in CMDLINE to the
bootloader line.
- CONFIG_CMDLINE_PREPEND to prepend the built-in CMDLINE in front of
the bootloader line.
For compatibility with existing architecture which uses CONFIG_OF, as
OF has already been converted to generic cmdline, we keep
CONFIG_CMDLINE_EXTEND as a synonym to CONFIG_CMDLINE_APPEND until
arm, powerpc, riscv and sh architectures have been converted.
A few differences are identified and will have to be taken
into account when converting the architecture to generic cmdline:
- riscv has CMDLINE_FALLBACK instead of CMDLINE_FROM_BOOTLOADER
- Some architectures are using CONFIG_CMDLINE_OVERRIDE or
CONFIG_CMDLINE_OVERWRITE instead of CONFIG_CMDLINE_FORCE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
v3:
- Comments from Will.
- Remove CONFIG_CMDLINE_BOOL. Using CONFIG_CMDLINE != "" instead, like arm and powerpc.
- Changed EXTEND to APPEND. Keep EXTEND for backward compatibility.
---
include/linux/cmdline.h | 2 +-
init/Kconfig | 52 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+), 1 deletion(-)
diff --git a/include/linux/cmdline.h b/include/linux/cmdline.h
index dea87edd41be..38306c109041 100644
--- a/include/linux/cmdline.h
+++ b/include/linux/cmdline.h
@@ -36,7 +36,7 @@ static __always_inline void __cmdline_build(char *dst, const char *src, size_t l
cmdline_strlcat(dst, src, len);
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+ if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || IS_ENABLED(CONFIG_CMDLINE_APPEND))
cmdline_strlcat(dst, " " CONFIG_CMDLINE, len);
}
diff --git a/init/Kconfig b/init/Kconfig
index 5f5c776ef192..af0d84662cc2 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -117,6 +117,58 @@ config INIT_ENV_ARG_LIMIT
Maximum of each of the number of arguments and environment
variables passed to init from the kernel command line.
+config GENERIC_CMDLINE
+ bool
+
+config CMDLINE
+ string "Default kernel command string" if GENERIC_CMDLINE
+ default ""
+ help
+ Defines a default kernel command string.
+ If this string is not empty, additional choices are proposed
+ below to determine how it will be used by the kernel.
+
+choice
+ prompt "Kernel command line type" if CMDLINE != ""
+ default CMDLINE_PREPEND if ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
+ default CMDLINE_FROM_BOOTLOADER
+ depends on GENERIC_CMDLINE
+ help
+ Determine how the default kernel arguments are combined with any
+ arguments passed by the bootloader if any.
+
+config CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader. If
+ the boot loader doesn't provide any, the default kernel command
+ string provided in CMDLINE will be used.
+
+config CMDLINE_APPEND
+ bool "Append to the bootloader kernel arguments"
+ help
+ The default kernel command string will be appended to the
+ command-line arguments provided by the bootloader.
+
+config CMDLINE_PREPEND
+ bool "Prepend to the bootloader kernel arguments"
+ help
+ The default kernel command string will be prepended to the
+ command-line arguments provided by the bootloader.
+
+config CMDLINE_FORCE
+ bool "Always use the default kernel command string"
+ help
+ Always use the default kernel command string, ignoring any
+ arguments provided by the bootloader.
+endchoice
+
+config CMDLINE_EXTEND
+ bool
+ default CMDLINE_APPEND
+ help
+ To be removed once all architectures are converted to generic CMDLINE
+
config COMPILE_TEST
bool "Compile also drivers which will not load"
depends on HAS_IOMEM
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 04/17] powerpc: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (2 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 03/17] cmdline: Gives architectures opportunity to use generically defined boot cmdline manipulation Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 05/17] arm: " Christophe Leroy
` (13 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This updates the powerpc code to use the new cmdline building function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/Kconfig | 37 +--------------------------------
arch/powerpc/kernel/prom_init.c | 17 +++++++--------
2 files changed, 8 insertions(+), 46 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 386ae12d8523..5181efd7757e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -167,6 +167,7 @@ config PPC
select EDAC_SUPPORT
select GENERIC_ATOMIC64 if PPC32
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC
@@ -886,42 +887,6 @@ config PPC_DENORMALISATION
Add support for handling denormalisation of single precision
values. Useful for bare metal only. If unsure say Y here.
-config CMDLINE
- string "Initial kernel command string"
- default ""
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- most cases you will need to specify the root device here.
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided by the boot loader will be
- appended to the default kernel command string.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-endchoice
-
config EXTRA_TARGETS
string "Additional default image types"
help
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index ccf77b985c8f..157d508e9fe9 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -152,7 +152,7 @@ static struct prom_t __prombss prom;
static unsigned long __prombss prom_entry;
static char __prombss of_stdout_device[256];
-static char __prombss prom_scratch[256];
+static char __prombss prom_scratch[COMMAND_LINE_SIZE];
static unsigned long __prombss dt_header_start;
static unsigned long __prombss dt_struct_start, dt_struct_end;
@@ -765,22 +765,19 @@ static unsigned long prom_memparse(const char *ptr, const char **retptr)
* Early parsing of the command line passed to the kernel, used for
* "mem=x" and the options that affect the iommu
*/
+#define cmdline_strlcat prom_strlcat
+#include <linux/cmdline.h>
+
static void __init early_cmdline_parse(void)
{
const char *opt;
-
- char *p;
int l = 0;
- prom_cmd_line[0] = 0;
- p = prom_cmd_line;
-
if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && (long)prom.chosen > 0)
- l = prom_getprop(prom.chosen, "bootargs", p, COMMAND_LINE_SIZE-1);
+ l = prom_getprop(prom.chosen, "bootargs", prom_scratch,
+ COMMAND_LINE_SIZE - 1);
- if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) || l <= 0 || p[0] == '\0')
- prom_strlcat(prom_cmd_line, " " CONFIG_CMDLINE,
- sizeof(prom_cmd_line));
+ __cmdline_build(prom_cmd_line, l > 0 ? prom_scratch : NULL, sizeof(prom_scratch));
prom_printf("command line: %s\n", prom_cmd_line);
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 05/17] arm: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (3 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 04/17] powerpc: Convert to GENERIC_CMDLINE Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 15:47 ` Rob Herring
2021-03-26 13:44 ` [PATCH v3 06/17] arm64: " Christophe Leroy
` (12 subsequent siblings)
17 siblings, 1 reply; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/arm/Kconfig | 38 +----------------------------------
arch/arm/kernel/atags_parse.c | 15 +++++---------
2 files changed, 6 insertions(+), 47 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5da96f5df48f..67bc75f2da81 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -50,6 +50,7 @@ config ARM
select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_CMDLINE if ATAGS
select GENERIC_IRQ_IPI if SMP
select GENERIC_CPU_AUTOPROBE
select GENERIC_EARLY_IOREMAP
@@ -1740,43 +1741,6 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
endchoice
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some architectures (e.g. CATS), there is currently no way
- for the boot loader to pass arguments to the kernel. For these
- architectures, you should supply some command-line options at build
- time by entering them here. As a minimum, you should specify the
- memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
- depends on ATAGS
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided by the boot loader will be
- appended to the default kernel command string.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-endchoice
-
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 373b61f9a4f0..3d5bd52ee458 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -14,6 +14,7 @@
* is not parsed in any way).
*/
+#include <linux/cmdline.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/kernel.h>
@@ -120,16 +121,10 @@ __tagtable(ATAG_REVISION, parse_tag_revision);
static int __init parse_tag_cmdline(const struct tag *tag)
{
-#if defined(CONFIG_CMDLINE_EXTEND)
- strlcat(default_command_line, " ", COMMAND_LINE_SIZE);
- strlcat(default_command_line, tag->u.cmdline.cmdline,
- COMMAND_LINE_SIZE);
-#elif defined(CONFIG_CMDLINE_FORCE)
- pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");
-#else
- strlcpy(default_command_line, tag->u.cmdline.cmdline,
- COMMAND_LINE_SIZE);
-#endif
+ cmdline_build(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
+
+ if IS_ENABLED(CONFIG_CMDLINE_FORCE)
+ pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");
return 0;
}
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PATCH v3 05/17] arm: Convert to GENERIC_CMDLINE
2021-03-26 13:44 ` [PATCH v3 05/17] arm: " Christophe Leroy
@ 2021-03-26 15:47 ` Rob Herring
2021-03-26 15:49 ` Christophe Leroy
` (2 more replies)
0 siblings, 3 replies; 40+ messages in thread
From: Rob Herring @ 2021-03-26 15:47 UTC (permalink / raw)
To: Christophe Leroy
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
>
> This converts the architecture to GENERIC_CMDLINE.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> arch/arm/Kconfig | 38 +----------------------------------
> arch/arm/kernel/atags_parse.c | 15 +++++---------
> 2 files changed, 6 insertions(+), 47 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 5da96f5df48f..67bc75f2da81 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -50,6 +50,7 @@ config ARM
> select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
> select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
> + select GENERIC_CMDLINE if ATAGS
Don't we need this enabled for !ATAGS (i.e. DT boot)?
Can we always enable GENERIC_CMDLINE for OF_EARLY_FLATTREE?
Rob
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 05/17] arm: Convert to GENERIC_CMDLINE
2021-03-26 15:47 ` Rob Herring
@ 2021-03-26 15:49 ` Christophe Leroy
2021-03-26 18:22 ` Rob Herring
2021-04-02 15:19 ` Christophe Leroy
2021-04-02 15:24 ` Christophe Leroy
2 siblings, 1 reply; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 15:49 UTC (permalink / raw)
To: Rob Herring
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:47, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>> This converts the architecture to GENERIC_CMDLINE.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> arch/arm/Kconfig | 38 +----------------------------------
>> arch/arm/kernel/atags_parse.c | 15 +++++---------
>> 2 files changed, 6 insertions(+), 47 deletions(-)
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index 5da96f5df48f..67bc75f2da81 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -50,6 +50,7 @@ config ARM
>> select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
>> select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
>> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
>> + select GENERIC_CMDLINE if ATAGS
>
> Don't we need this enabled for !ATAGS (i.e. DT boot)?
>
> Can we always enable GENERIC_CMDLINE for OF_EARLY_FLATTREE?
>
Don't know.
Today ARM has:
choice
prompt "Kernel command line type" if CMDLINE != ""
default CMDLINE_FROM_BOOTLOADER
depends on ATAGS
Christophe
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 05/17] arm: Convert to GENERIC_CMDLINE
2021-03-26 15:49 ` Christophe Leroy
@ 2021-03-26 18:22 ` Rob Herring
0 siblings, 0 replies; 40+ messages in thread
From: Rob Herring @ 2021-03-26 18:22 UTC (permalink / raw)
To: Christophe Leroy, Nicolas Pitre
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
+Nico who added the line in question.
On Fri, Mar 26, 2021 at 9:50 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
>
>
>
> Le 26/03/2021 à 16:47, Rob Herring a écrit :
> > On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> > <christophe.leroy@csgroup.eu> wrote:
> >>
> >> This converts the architecture to GENERIC_CMDLINE.
> >>
> >> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> >> ---
> >> arch/arm/Kconfig | 38 +----------------------------------
> >> arch/arm/kernel/atags_parse.c | 15 +++++---------
> >> 2 files changed, 6 insertions(+), 47 deletions(-)
> >>
> >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> >> index 5da96f5df48f..67bc75f2da81 100644
> >> --- a/arch/arm/Kconfig
> >> +++ b/arch/arm/Kconfig
> >> @@ -50,6 +50,7 @@ config ARM
> >> select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
> >> select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
> >> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
> >> + select GENERIC_CMDLINE if ATAGS
> >
> > Don't we need this enabled for !ATAGS (i.e. DT boot)?
> >
> > Can we always enable GENERIC_CMDLINE for OF_EARLY_FLATTREE?
> >
>
> Don't know.
>
> Today ARM has:
>
> choice
> prompt "Kernel command line type" if CMDLINE != ""
> default CMDLINE_FROM_BOOTLOADER
> depends on ATAGS
I think that's a mistake. In a DT only case (no ATAGS), we'll get
different behaviour (in fdt.c) depending if CONFIG_ATAGS is enabled or
not. Note that at the time (2012) the above was added, the DT code
only supported CONFIG_CMDLINE and CONFIG_CMDLINE_FORCE.
CONFIG_CMDLINE_EXTEND was only added in 2016. And that has different
behavior for ATAGS vs. DT. In summary, it's a mess. We should drop the
depends either before this patch or just as part of this patch IMO.
I'd go with the latter given CONFIG_ATAGS is default y and enabled for
common configs. Without that, it looks like CONFIG_CMDLINE disappears
from menuconfig for at91_dt_defconfig.
Also, I think this code should be refactored a bit to eliminate
default_command_line. Instead, we should just save a pointer to the
ATAGS command line string, and then call cmdline_build here instead of
doing the extra copy:
/* parse_early_param needs a boot_command_line */
strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
Rob
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 05/17] arm: Convert to GENERIC_CMDLINE
2021-03-26 15:47 ` Rob Herring
2021-03-26 15:49 ` Christophe Leroy
@ 2021-04-02 15:19 ` Christophe Leroy
2021-04-02 15:24 ` Christophe Leroy
2 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:19 UTC (permalink / raw)
To: Rob Herring
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:47, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>> This converts the architecture to GENERIC_CMDLINE.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> arch/arm/Kconfig | 38 +----------------------------------
>> arch/arm/kernel/atags_parse.c | 15 +++++---------
>> 2 files changed, 6 insertions(+), 47 deletions(-)
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index 5da96f5df48f..67bc75f2da81 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -50,6 +50,7 @@ config ARM
>> select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
>> select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
>> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
>> + select GENERIC_CMDLINE if ATAGS
>
> Don't we need this enabled for !ATAGS (i.e. DT boot)?
>
> Can we always enable GENERIC_CMDLINE for OF_EARLY_FLATTREE?
>
Done in v4
^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH v3 05/17] arm: Convert to GENERIC_CMDLINE
2021-03-26 15:47 ` Rob Herring
2021-03-26 15:49 ` Christophe Leroy
2021-04-02 15:19 ` Christophe Leroy
@ 2021-04-02 15:24 ` Christophe Leroy
2 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:24 UTC (permalink / raw)
To: Rob Herring
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:47, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>> This converts the architecture to GENERIC_CMDLINE.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> arch/arm/Kconfig | 38 +----------------------------------
>> arch/arm/kernel/atags_parse.c | 15 +++++---------
>> 2 files changed, 6 insertions(+), 47 deletions(-)
>>
>> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
>> index 5da96f5df48f..67bc75f2da81 100644
>> --- a/arch/arm/Kconfig
>> +++ b/arch/arm/Kconfig
>> @@ -50,6 +50,7 @@ config ARM
>> select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
>> select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
>> select GENERIC_CLOCKEVENTS_BROADCAST if SMP
>> + select GENERIC_CMDLINE if ATAGS
>
> Don't we need this enabled for !ATAGS (i.e. DT boot)?
>
> Can we always enable GENERIC_CMDLINE for OF_EARLY_FLATTREE?
>
Yes missed it in v3 after your comment on v2. Done in v4.
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 06/17] arm64: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (4 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 05/17] arm: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 07/17] hexagon: " Christophe Leroy
` (11 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/arm64/Kconfig | 33 +-----------------------------
arch/arm64/kernel/idreg-override.c | 9 ++++----
2 files changed, 5 insertions(+), 37 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 5656e7aacd69..eeff7730ccf0 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -105,6 +105,7 @@ config ARM64
select GENERIC_ALLOCATOR
select GENERIC_ARCH_TOPOLOGY
select GENERIC_CLOCKEVENTS_BROADCAST
+ select GENERIC_CMDLINE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
select GENERIC_EARLY_IOREMAP
@@ -1831,38 +1832,6 @@ config ARM64_ACPI_PARKING_PROTOCOL
protocol even if the corresponding data is present in the ACPI
MADT table.
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- Provide a set of default command-line options at build time by
- entering them here. As a minimum, you should specify the the
- root device (e.g. root=/dev/nfs).
-
-choice
- prompt "Kernel command line type" if CMDLINE != ""
- default CMDLINE_FROM_BOOTLOADER
- help
- Choose how the kernel will handle the provided default kernel
- command line string.
-
-config CMDLINE_FROM_BOOTLOADER
- bool "Use bootloader kernel arguments if available"
- help
- Uses the command-line options passed by the boot loader. If
- the boot loader doesn't provide any, the default kernel command
- string provided in CMDLINE will be used.
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the default kernel command string, even if the boot
- loader passes other arguments to the kernel.
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-endchoice
-
config EFI_STUB
bool
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index 83f1c4b92095..8bc955cdcf82 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -9,6 +9,7 @@
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/libfdt.h>
+#include <linux/cmdline.h>
#include <asm/cacheflush.h>
#include <asm/cpufeature.h>
@@ -187,12 +188,10 @@ static __init const u8 *get_bootargs_cmdline(void)
static __init void parse_cmdline(void)
{
const u8 *prop = get_bootargs_cmdline();
+ static char __initdata cmdline[COMMAND_LINE_SIZE];
- if (IS_ENABLED(CONFIG_CMDLINE_FORCE) || !prop)
- __parse_cmdline(CONFIG_CMDLINE, true);
-
- if (!IS_ENABLED(CONFIG_CMDLINE_FORCE) && prop)
- __parse_cmdline(prop, true);
+ cmdline_build(cmdline, prop, COMMAND_LINE_SIZE);
+ __parse_cmdline(cmdline, true);
}
/* Keep checkers quiet */
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 07/17] hexagon: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (5 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 06/17] arm64: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 08/17] microblaze: " Christophe Leroy
` (10 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/hexagon/Kconfig | 11 +----------
arch/hexagon/kernel/setup.c | 10 ++--------
2 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 44a409967af1..1e69c99bae6b 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -18,6 +18,7 @@ config HEXAGON
select HAVE_PERF_EVENTS
# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
select GENERIC_ALLOCATOR
+ select GENERIC_CMDLINE
select GENERIC_IRQ_SHOW
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
@@ -91,16 +92,6 @@ config HEXAGON_ARCH_VERSION
int "Architecture version"
default 2
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some platforms, there is currently no way for the boot loader
- to pass arguments to the kernel. For these, you should supply some
- command-line options at build time by entering them here. At a
- minimum, you should specify the memory size and the root device
- (e.g., mem=64M root=/dev/nfs).
-
config SMP
bool "Multi-Processing support"
help
diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c
index 1880d9beaf2b..be586cea4076 100644
--- a/arch/hexagon/kernel/setup.c
+++ b/arch/hexagon/kernel/setup.c
@@ -13,6 +13,7 @@
#include <linux/seq_file.h>
#include <linux/console.h>
#include <linux/of_fdt.h>
+#include <linux/cmdline.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/setup.h>
@@ -22,7 +23,6 @@
#include <asm/time.h>
char cmd_line[COMMAND_LINE_SIZE];
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
int on_simulator;
@@ -38,8 +38,6 @@ void calibrate_delay(void)
void __init setup_arch(char **cmdline_p)
{
- char *p = &external_cmdline_buffer;
-
/*
* These will eventually be pulled in via either some hypervisor
* or devicetree description. Hardwiring for now.
@@ -65,11 +63,7 @@ void __init setup_arch(char **cmdline_p)
else
on_simulator = 0;
- if (p[0] != '\0')
- strlcpy(boot_command_line, p, COMMAND_LINE_SIZE);
- else
- strlcpy(boot_command_line, default_command_line,
- COMMAND_LINE_SIZE);
+ cmdline_build(boot_command_line, external_cmdline_buffer, COMMAND_LINE_SIZE);
/*
* boot_command_line and the value set up by setup_arch
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 08/17] microblaze: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (6 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 07/17] hexagon: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 09/17] nios2: " Christophe Leroy
` (9 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/microblaze/Kconfig | 24 +-----------------------
arch/microblaze/configs/mmu_defconfig | 2 +-
arch/microblaze/kernel/head.S | 4 ++--
3 files changed, 4 insertions(+), 26 deletions(-)
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 0660f47012bc..1242f34bc2a2 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -15,6 +15,7 @@ config MICROBLAZE
select COMMON_CLK
select DMA_DIRECT_REMAP
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_CPU_DEVICES
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
@@ -93,29 +94,6 @@ source "kernel/Kconfig.hz"
config MMU
def_bool y
-comment "Boot options"
-
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyUL0,115200"
- help
- On some architectures there is currently no way for the boot loader
- to pass arguments to the kernel. For these architectures, you should
- supply some command-line options at build time by entering them
- here.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- default n
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
endmenu
menu "Kernel features"
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index 51337fffb947..b4d2219d0a8f 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -16,7 +16,7 @@ CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
CONFIG_HZ_100=y
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
CONFIG_CMDLINE_FORCE=y
CONFIG_HIGHMEM=y
CONFIG_PCI_XILINX=y
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index ec2fcb545e64..605b18c86ac8 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -105,7 +105,7 @@ _copy_fdt:
addik r3, r3, -4 /* descrement loop */
no_fdt_arg:
-#ifndef CONFIG_CMDLINE_BOOL
+#if CONFIG_CMDLINE == ""
/*
* handling command line
* copy command line directly to cmd_line placed in data section.
@@ -126,7 +126,7 @@ _copy_command_line:
addik r5, r4, 0 /* add new space for command line */
tovirt(r5,r5)
skip:
-#endif /* CONFIG_CMDLINE_BOOL */
+#endif /* CONFIG_CMDLINE */
#ifdef NOT_COMPILE
/* save bram context */
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (7 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 08/17] microblaze: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-29 1:35 ` Tan, Ley Foon
2021-03-26 13:44 ` [PATCH v3 10/17] openrisc: " Christophe Leroy
` (8 subsequent siblings)
17 siblings, 1 reply; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/nios2/Kconfig | 24 +-----------------------
arch/nios2/kernel/setup.c | 13 ++++---------
2 files changed, 5 insertions(+), 32 deletions(-)
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index c24955c81c92..f66c97b15813 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
comment "Boot options"
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- default y
-
-config CMDLINE
- string "Default kernel command string"
- default ""
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
- to set them up in board prom initialization routines.
-
-config CMDLINE_FORCE
- bool "Force default kernel command string"
- depends on CMDLINE_BOOL
- help
- Set this to have arguments from the default kernel command string
- override those passed by the boot loader.
-
config NIOS2_CMDLINE_IGNORE_DTB
bool "Ignore kernel command string from DTB"
- depends on CMDLINE_BOOL
+ depends on CMDLINE != ""
depends on !CMDLINE_FORCE
default y
help
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index d2f21957e99c..42464f457a6d 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/screen_info.h>
+#include <linux/cmdline.h>
#include <asm/mmu_context.h>
#include <asm/sections.h>
@@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
unsigned r7)
{
unsigned dtb_passed = 0;
- char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
#if defined(CONFIG_NIOS2_PASS_CMDLINE)
if (r4 == 0x534f494e) { /* r4 is magic NIOS */
@@ -127,14 +128,8 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
early_init_devtree((void *)dtb_passed);
-#ifndef CONFIG_CMDLINE_FORCE
- if (cmdline_passed[0])
- strlcpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
-#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
- else
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
-#endif
-#endif
+ if (cmdline_passed[0] || IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
+ cmdline_build(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
parse_early_param();
}
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* RE: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
2021-03-26 13:44 ` [PATCH v3 09/17] nios2: " Christophe Leroy
@ 2021-03-29 1:35 ` Tan, Ley Foon
2021-04-02 15:33 ` Christophe Leroy
0 siblings, 1 reply; 40+ messages in thread
From: Tan, Ley Foon @ 2021-03-29 1:35 UTC (permalink / raw)
To: Christophe Leroy, will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
> -----Original Message-----
> From: Christophe Leroy <christophe.leroy@csgroup.eu>
> Sent: Friday, March 26, 2021 9:45 PM
> To: will@kernel.org; danielwa@cisco.com; robh@kernel.org;
> daniel@gimpelevich.san-francisco.ca.us
> Cc: linux-arch@vger.kernel.org; devicetree@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; linux-kernel@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org; microblaze
> <monstr@monstr.eu>; linux-mips@vger.kernel.org; Tan, Ley Foon
> <ley.foon.tan@intel.com>; openrisc@lists.librecores.org; linux-
> hexagon@vger.kernel.org; linux-riscv@lists.infradead.org; x86@kernel.org;
> linux-xtensa@linux-xtensa.org; linux-sh@vger.kernel.org;
> sparclinux@vger.kernel.org
> Subject: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
>
> This converts the architecture to GENERIC_CMDLINE.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> arch/nios2/Kconfig | 24 +-----------------------
> arch/nios2/kernel/setup.c | 13 ++++---------
> 2 files changed, 5 insertions(+), 32 deletions(-)
>
> diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig index
> c24955c81c92..f66c97b15813 100644
> --- a/arch/nios2/Kconfig
> +++ b/arch/nios2/Kconfig
> @@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
>
> comment "Boot options"
>
> -config CMDLINE_BOOL
> - bool "Default bootloader kernel arguments"
> - default y
> -
> -config CMDLINE
> - string "Default kernel command string"
> - default ""
> - depends on CMDLINE_BOOL
> - help
> - On some platforms, there is currently no way for the boot loader to
> - pass arguments to the kernel. For these platforms, you can supply
> - some command-line options at build time by entering them here. In
> - other cases you can specify kernel args so that you don't have
> - to set them up in board prom initialization routines.
> -
> -config CMDLINE_FORCE
> - bool "Force default kernel command string"
> - depends on CMDLINE_BOOL
> - help
> - Set this to have arguments from the default kernel command string
> - override those passed by the boot loader.
> -
> config NIOS2_CMDLINE_IGNORE_DTB
> bool "Ignore kernel command string from DTB"
> - depends on CMDLINE_BOOL
> + depends on CMDLINE != ""
> depends on !CMDLINE_FORCE
> default y
> help
Missing " select GENERIC_CMDLINE" ?
> diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c index
> d2f21957e99c..42464f457a6d 100644
> --- a/arch/nios2/kernel/setup.c
> +++ b/arch/nios2/kernel/setup.c
> @@ -20,6 +20,7 @@
> #include <linux/initrd.h>
> #include <linux/of_fdt.h>
> #include <linux/screen_info.h>
> +#include <linux/cmdline.h>
>
> #include <asm/mmu_context.h>
> #include <asm/sections.h>
> @@ -108,7 +109,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4,
> unsigned r5, unsigned r6,
> unsigned r7)
> {
> unsigned dtb_passed = 0;
> - char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused =
> { 0, };
> + char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
>
> #if defined(CONFIG_NIOS2_PASS_CMDLINE)
> if (r4 == 0x534f494e) { /* r4 is magic NIOS */ @@ -127,14 +128,8 @@
> asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
>
> early_init_devtree((void *)dtb_passed);
>
> -#ifndef CONFIG_CMDLINE_FORCE
> - if (cmdline_passed[0])
> - strlcpy(boot_command_line, cmdline_passed,
> COMMAND_LINE_SIZE);
> -#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
> - else
> - strlcpy(boot_command_line, CONFIG_CMDLINE,
> COMMAND_LINE_SIZE);
> -#endif
> -#endif
> + if (cmdline_passed[0] ||
> IS_ENABLED(CONFIG_NIOS2_CMDLINE_IGNORE_DTB))
> + cmdline_build(boot_command_line, cmdline_passed,
> COMMAND_LINE_SIZE);
>
> parse_early_param();
> }
> --
> 2.25.0
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
2021-03-29 1:35 ` Tan, Ley Foon
@ 2021-04-02 15:33 ` Christophe Leroy
0 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:33 UTC (permalink / raw)
To: Tan, Ley Foon, will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel,
linux-arm-kernel, microblaze, linux-mips, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
Le 29/03/2021 à 03:35, Tan, Ley Foon a écrit :
>
>
>> -----Original Message-----
>> From: Christophe Leroy <christophe.leroy@csgroup.eu>
>> Sent: Friday, March 26, 2021 9:45 PM
>> To: will@kernel.org; danielwa@cisco.com; robh@kernel.org;
>> daniel@gimpelevich.san-francisco.ca.us
>> Cc: linux-arch@vger.kernel.org; devicetree@vger.kernel.org; linuxppc-
>> dev@lists.ozlabs.org; linux-kernel@vger.kernel.org; linuxppc-
>> dev@lists.ozlabs.org; linux-arm-kernel@lists.infradead.org; microblaze
>> <monstr@monstr.eu>; linux-mips@vger.kernel.org; Tan, Ley Foon
>> <ley.foon.tan@intel.com>; openrisc@lists.librecores.org; linux-
>> hexagon@vger.kernel.org; linux-riscv@lists.infradead.org; x86@kernel.org;
>> linux-xtensa@linux-xtensa.org; linux-sh@vger.kernel.org;
>> sparclinux@vger.kernel.org
>> Subject: [PATCH v3 09/17] nios2: Convert to GENERIC_CMDLINE
>>
>> This converts the architecture to GENERIC_CMDLINE.
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
>> ---
>> arch/nios2/Kconfig | 24 +-----------------------
>> arch/nios2/kernel/setup.c | 13 ++++---------
>> 2 files changed, 5 insertions(+), 32 deletions(-)
>>
>> diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig index
>> c24955c81c92..f66c97b15813 100644
>> --- a/arch/nios2/Kconfig
>> +++ b/arch/nios2/Kconfig
>> @@ -90,31 +90,9 @@ config NIOS2_ALIGNMENT_TRAP
>>
>> comment "Boot options"
>>
>> -config CMDLINE_BOOL
>> - bool "Default bootloader kernel arguments"
>> - default y
>> -
>> -config CMDLINE
>> - string "Default kernel command string"
>> - default ""
>> - depends on CMDLINE_BOOL
>> - help
>> - On some platforms, there is currently no way for the boot loader to
>> - pass arguments to the kernel. For these platforms, you can supply
>> - some command-line options at build time by entering them here. In
>> - other cases you can specify kernel args so that you don't have
>> - to set them up in board prom initialization routines.
>> -
>> -config CMDLINE_FORCE
>> - bool "Force default kernel command string"
>> - depends on CMDLINE_BOOL
>> - help
>> - Set this to have arguments from the default kernel command string
>> - override those passed by the boot loader.
>> -
>> config NIOS2_CMDLINE_IGNORE_DTB
>> bool "Ignore kernel command string from DTB"
>> - depends on CMDLINE_BOOL
>> + depends on CMDLINE != ""
>> depends on !CMDLINE_FORCE
>> default y
>> help
>
> Missing " select GENERIC_CMDLINE" ?
Added in v4
Thanks
Christophe
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 10/17] openrisc: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (8 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 09/17] nios2: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 13:44 ` [PATCH v3 11/17] riscv: " Christophe Leroy
` (7 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/openrisc/Kconfig | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 591acc5990dc..ca1d0f18fe16 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -25,6 +25,7 @@ config OPENRISC
select HAVE_UID16
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS_BROADCAST
+ select GENERIC_CMDLINE
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
select GENERIC_SMP_IDLE_THREAD
@@ -162,15 +163,6 @@ config OPENRISC_HAVE_SHADOW_GPRS
On SMP systems, this feature is mandatory.
On a unicore system it's safe to say N here if you are unsure.
-config CMDLINE
- string "Default kernel command string"
- default ""
- help
- On some architectures there is currently no way for the boot loader
- to pass arguments to the kernel. For these architectures, you should
- supply some command-line options at build time by entering them
- here.
-
menu "Debugging options"
config JUMP_UPON_UNHANDLED_EXCEPTION
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 11/17] riscv: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (9 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 10/17] openrisc: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-03-26 14:08 ` Andreas Schwab
2021-03-26 13:44 ` [PATCH v3 12/17] sh: " Christophe Leroy
` (6 subsequent siblings)
17 siblings, 1 reply; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/riscv/Kconfig | 44 +--------------------------------------
arch/riscv/kernel/setup.c | 5 ++---
2 files changed, 3 insertions(+), 46 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 87d7b52f278f..3dbd50bed037 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -39,6 +39,7 @@ config RISCV
select EDAC_SUPPORT
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_EARLY_IOREMAP
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IOREMAP
@@ -390,49 +391,6 @@ endmenu
menu "Boot options"
-config CMDLINE
- string "Built-in kernel command line"
- help
- For most platforms, the arguments for the kernel's command line
- are provided at run-time, during boot. However, there are cases
- where either no arguments are being provided or the provided
- arguments are insufficient or even invalid.
-
- When that occurs, it is possible to define a built-in command
- line here and choose how the kernel should use it later on.
-
-choice
- prompt "Built-in command line usage" if CMDLINE != ""
- default CMDLINE_FALLBACK
- help
- Choose how the kernel will handle the provided built-in command
- line.
-
-config CMDLINE_FALLBACK
- bool "Use bootloader kernel arguments if available"
- help
- Use the built-in command line as fallback in case we get nothing
- during boot. This is the default behaviour.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- The command-line arguments provided during boot will be
- appended to the built-in command line. This is useful in
- cases where the provided arguments are insufficient and
- you don't want to or cannot modify them.
-
-
-config CMDLINE_FORCE
- bool "Always use the default kernel command string"
- help
- Always use the built-in command line, even if we get one during
- boot. This is useful in case you need to override the provided
- command line on systems where you don't have or want control
- over it.
-
-endchoice
-
config EFI_STUB
bool
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index f8f15332caa2..e7c91ee478d1 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -20,6 +20,7 @@
#include <linux/swiotlb.h>
#include <linux/smp.h>
#include <linux/efi.h>
+#include <linux/cmdline.h>
#include <asm/cpu_ops.h>
#include <asm/early_ioremap.h>
@@ -228,10 +229,8 @@ static void __init parse_dtb(void)
}
pr_err("No DTB passed to the kernel\n");
-#ifdef CONFIG_CMDLINE_FORCE
- strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+ cmdline_build(boot_command_line, NULL, COMMAND_LINE_SIZE);
pr_info("Forcing kernel command line to: %s\n", boot_command_line);
-#endif
}
void __init setup_arch(char **cmdline_p)
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PATCH v3 11/17] riscv: Convert to GENERIC_CMDLINE
2021-03-26 13:44 ` [PATCH v3 11/17] riscv: " Christophe Leroy
@ 2021-03-26 14:08 ` Andreas Schwab
2021-03-26 14:20 ` Christophe Leroy
0 siblings, 1 reply; 40+ messages in thread
From: Andreas Schwab @ 2021-03-26 14:08 UTC (permalink / raw)
To: Christophe Leroy
Cc: will, danielwa, robh, daniel, linux-arch, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
linux-mips, nios2, openrisc, linux-hexagon, linux-riscv, x86,
linux-xtensa, linux-sh, sparclinux
On Mär 26 2021, Christophe Leroy wrote:
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index f8f15332caa2..e7c91ee478d1 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -20,6 +20,7 @@
> #include <linux/swiotlb.h>
> #include <linux/smp.h>
> #include <linux/efi.h>
> +#include <linux/cmdline.h>
>
> #include <asm/cpu_ops.h>
> #include <asm/early_ioremap.h>
> @@ -228,10 +229,8 @@ static void __init parse_dtb(void)
> }
>
> pr_err("No DTB passed to the kernel\n");
> -#ifdef CONFIG_CMDLINE_FORCE
> - strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
> + cmdline_build(boot_command_line, NULL, COMMAND_LINE_SIZE);
> pr_info("Forcing kernel command line to: %s\n", boot_command_line);
Shouldn't that message become conditional in some way?
Andreas.
--
Andreas Schwab, schwab@linux-m68k.org
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1
"And now for something completely different."
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 11/17] riscv: Convert to GENERIC_CMDLINE
2021-03-26 14:08 ` Andreas Schwab
@ 2021-03-26 14:20 ` Christophe Leroy
2021-03-26 15:26 ` Rob Herring
0 siblings, 1 reply; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 14:20 UTC (permalink / raw)
To: Andreas Schwab
Cc: will, danielwa, robh, daniel, linux-arch, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
linux-mips, nios2, openrisc, linux-hexagon, linux-riscv, x86,
linux-xtensa, linux-sh, sparclinux
Le 26/03/2021 à 15:08, Andreas Schwab a écrit :
> On Mär 26 2021, Christophe Leroy wrote:
>
>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>> index f8f15332caa2..e7c91ee478d1 100644
>> --- a/arch/riscv/kernel/setup.c
>> +++ b/arch/riscv/kernel/setup.c
>> @@ -20,6 +20,7 @@
>> #include <linux/swiotlb.h>
>> #include <linux/smp.h>
>> #include <linux/efi.h>
>> +#include <linux/cmdline.h>
>>
>> #include <asm/cpu_ops.h>
>> #include <asm/early_ioremap.h>
>> @@ -228,10 +229,8 @@ static void __init parse_dtb(void)
>> }
>>
>> pr_err("No DTB passed to the kernel\n");
>> -#ifdef CONFIG_CMDLINE_FORCE
>> - strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
>> + cmdline_build(boot_command_line, NULL, COMMAND_LINE_SIZE);
>> pr_info("Forcing kernel command line to: %s\n", boot_command_line);
>
> Shouldn't that message become conditional in some way?
>
You are right, I did something similar on ARM but looks like I missed it on RISCV.
Christophe
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 11/17] riscv: Convert to GENERIC_CMDLINE
2021-03-26 14:20 ` Christophe Leroy
@ 2021-03-26 15:26 ` Rob Herring
2021-03-30 0:52 ` Nick Kossifidis
2021-04-02 15:21 ` Christophe Leroy
0 siblings, 2 replies; 40+ messages in thread
From: Rob Herring @ 2021-03-26 15:26 UTC (permalink / raw)
To: Christophe Leroy
Cc: Andreas Schwab, Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
On Fri, Mar 26, 2021 at 8:20 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
>
>
>
> Le 26/03/2021 à 15:08, Andreas Schwab a écrit :
> > On Mär 26 2021, Christophe Leroy wrote:
> >
> >> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> >> index f8f15332caa2..e7c91ee478d1 100644
> >> --- a/arch/riscv/kernel/setup.c
> >> +++ b/arch/riscv/kernel/setup.c
> >> @@ -20,6 +20,7 @@
> >> #include <linux/swiotlb.h>
> >> #include <linux/smp.h>
> >> #include <linux/efi.h>
> >> +#include <linux/cmdline.h>
> >>
> >> #include <asm/cpu_ops.h>
> >> #include <asm/early_ioremap.h>
> >> @@ -228,10 +229,8 @@ static void __init parse_dtb(void)
> >> }
> >>
> >> pr_err("No DTB passed to the kernel\n");
> >> -#ifdef CONFIG_CMDLINE_FORCE
> >> - strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
> >> + cmdline_build(boot_command_line, NULL, COMMAND_LINE_SIZE);
> >> pr_info("Forcing kernel command line to: %s\n", boot_command_line);
> >
> > Shouldn't that message become conditional in some way?
> >
>
> You are right, I did something similar on ARM but looks like I missed it on RISCV.
How is this hunk even useful? Under what conditions can you boot
without a DTB? Even with a built-in DTB, the DT cmdline handling would
be called.
Rob
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 11/17] riscv: Convert to GENERIC_CMDLINE
2021-03-26 15:26 ` Rob Herring
@ 2021-03-30 0:52 ` Nick Kossifidis
2021-04-02 15:21 ` Christophe Leroy
1 sibling, 0 replies; 40+ messages in thread
From: Nick Kossifidis @ 2021-03-30 0:52 UTC (permalink / raw)
To: Rob Herring
Cc: Christophe Leroy, Andreas Schwab, Will Deacon, Daniel Walker,
Daniel Gimpelevich, open list:GENERIC INCLUDE/ASM HEADER FILES,
devicetree, linuxppc-dev, linux-kernel, linux-arm-kernel,
microblaze, open list:MIPS, nios2, Openrisc, linux-hexagon,
linux-riscv, X86 ML, linux-xtensa, SH-Linux, sparclinux,
paul.walmsley
Στις 2021-03-26 17:26, Rob Herring έγραψε:
> On Fri, Mar 26, 2021 at 8:20 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>>
>>
>> Le 26/03/2021 à 15:08, Andreas Schwab a écrit :
>> > On Mär 26 2021, Christophe Leroy wrote:
>> >
>> >> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>> >> index f8f15332caa2..e7c91ee478d1 100644
>> >> --- a/arch/riscv/kernel/setup.c
>> >> +++ b/arch/riscv/kernel/setup.c
>> >> @@ -20,6 +20,7 @@
>> >> #include <linux/swiotlb.h>
>> >> #include <linux/smp.h>
>> >> #include <linux/efi.h>
>> >> +#include <linux/cmdline.h>
>> >>
>> >> #include <asm/cpu_ops.h>
>> >> #include <asm/early_ioremap.h>
>> >> @@ -228,10 +229,8 @@ static void __init parse_dtb(void)
>> >> }
>> >>
>> >> pr_err("No DTB passed to the kernel\n");
>> >> -#ifdef CONFIG_CMDLINE_FORCE
>> >> - strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
>> >> + cmdline_build(boot_command_line, NULL, COMMAND_LINE_SIZE);
>> >> pr_info("Forcing kernel command line to: %s\n", boot_command_line);
>> >
>> > Shouldn't that message become conditional in some way?
>> >
>>
>> You are right, I did something similar on ARM but looks like I missed
>> it on RISCV.
>
> How is this hunk even useful? Under what conditions can you boot
> without a DTB? Even with a built-in DTB, the DT cmdline handling would
> be called.
>
> Rob
>
cced Paul who introduced this:
https://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git/commit/arch/riscv/kernel/setup.c?id=8fd6e05c7463b635e51ec7df0a1858c1b5a6e350
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 11/17] riscv: Convert to GENERIC_CMDLINE
2021-03-26 15:26 ` Rob Herring
2021-03-30 0:52 ` Nick Kossifidis
@ 2021-04-02 15:21 ` Christophe Leroy
1 sibling, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:21 UTC (permalink / raw)
To: Rob Herring
Cc: Andreas Schwab, Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:26, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 8:20 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>>
>>
>> Le 26/03/2021 à 15:08, Andreas Schwab a écrit :
>>> On Mär 26 2021, Christophe Leroy wrote:
>>>
>>>> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
>>>> index f8f15332caa2..e7c91ee478d1 100644
>>>> --- a/arch/riscv/kernel/setup.c
>>>> +++ b/arch/riscv/kernel/setup.c
>>>> @@ -20,6 +20,7 @@
>>>> #include <linux/swiotlb.h>
>>>> #include <linux/smp.h>
>>>> #include <linux/efi.h>
>>>> +#include <linux/cmdline.h>
>>>>
>>>> #include <asm/cpu_ops.h>
>>>> #include <asm/early_ioremap.h>
>>>> @@ -228,10 +229,8 @@ static void __init parse_dtb(void)
>>>> }
>>>>
>>>> pr_err("No DTB passed to the kernel\n");
>>>> -#ifdef CONFIG_CMDLINE_FORCE
>>>> - strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
>>>> + cmdline_build(boot_command_line, NULL, COMMAND_LINE_SIZE);
>>>> pr_info("Forcing kernel command line to: %s\n", boot_command_line);
>>>
>>> Shouldn't that message become conditional in some way?
>>>
>>
>> You are right, I did something similar on ARM but looks like I missed it on RISCV.
>
> How is this hunk even useful? Under what conditions can you boot
> without a DTB? Even with a built-in DTB, the DT cmdline handling would
> be called.
>
Don't know, I wanted to keep as is today.
Do you think the hunk should be completely removed ?
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 12/17] sh: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (10 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 11/17] riscv: " Christophe Leroy
@ 2021-03-26 13:44 ` Christophe Leroy
2021-04-02 15:36 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 13/17] sparc: " Christophe Leroy
` (5 subsequent siblings)
17 siblings, 1 reply; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:44 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/sh/Kconfig | 30 +--------------------
arch/sh/configs/ap325rxa_defconfig | 2 +-
arch/sh/configs/dreamcast_defconfig | 2 +-
arch/sh/configs/ecovec24-romimage_defconfig | 2 +-
arch/sh/configs/ecovec24_defconfig | 2 +-
arch/sh/configs/edosk7760_defconfig | 2 +-
arch/sh/configs/espt_defconfig | 2 +-
arch/sh/configs/j2_defconfig | 2 +-
arch/sh/configs/kfr2r09-romimage_defconfig | 2 +-
arch/sh/configs/kfr2r09_defconfig | 2 +-
arch/sh/configs/lboxre2_defconfig | 2 +-
arch/sh/configs/microdev_defconfig | 2 +-
arch/sh/configs/migor_defconfig | 2 +-
arch/sh/configs/polaris_defconfig | 2 +-
arch/sh/configs/r7780mp_defconfig | 2 +-
arch/sh/configs/r7785rp_defconfig | 2 +-
arch/sh/configs/rsk7201_defconfig | 2 +-
arch/sh/configs/rsk7203_defconfig | 2 +-
arch/sh/configs/rts7751r2d1_defconfig | 2 +-
arch/sh/configs/rts7751r2dplus_defconfig | 2 +-
arch/sh/configs/sdk7780_defconfig | 2 +-
arch/sh/configs/sdk7786_defconfig | 2 +-
arch/sh/configs/se7206_defconfig | 2 +-
arch/sh/configs/se7343_defconfig | 2 +-
arch/sh/configs/se7712_defconfig | 2 +-
arch/sh/configs/se7721_defconfig | 2 +-
arch/sh/configs/se7724_defconfig | 2 +-
arch/sh/configs/se7751_defconfig | 2 +-
arch/sh/configs/se7780_defconfig | 2 +-
arch/sh/configs/sh03_defconfig | 2 +-
arch/sh/configs/sh2007_defconfig | 2 +-
arch/sh/configs/sh7757lcr_defconfig | 2 +-
arch/sh/configs/sh7763rdp_defconfig | 2 +-
arch/sh/configs/shmin_defconfig | 2 +-
arch/sh/configs/shx3_defconfig | 2 +-
arch/sh/configs/titan_defconfig | 2 +-
arch/sh/configs/ul2_defconfig | 2 +-
arch/sh/kernel/setup.c | 11 ++------
38 files changed, 39 insertions(+), 74 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index e798e55915c2..fab84f62448c 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,6 +16,7 @@ config SUPERH
select CPU_NO_EFFICIENT_FFS
select DMA_DECLARE_COHERENT
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_SHOW
@@ -742,35 +743,6 @@ config ROMIMAGE_MMCIF
first part of the romImage which in turn loads the rest the kernel
image to RAM using the MMCIF hardware block.
-choice
- prompt "Kernel command line"
- optional
- default CMDLINE_OVERWRITE
- help
- Setting this option allows the kernel command line arguments
- to be set.
-
-config CMDLINE_OVERWRITE
- bool "Overwrite bootloader kernel arguments"
- help
- Given string will overwrite any arguments passed in by
- a bootloader.
-
-config CMDLINE_EXTEND
- bool "Extend bootloader kernel arguments"
- help
- Given string will be concatenated with arguments passed in
- by a bootloader.
-
-endchoice
-
-config CMDLINE
- string "Kernel command line arguments string"
- depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
- default "console=ttySC1,115200"
-
-endmenu
-
menu "Bus options"
config SUPERHYWAY
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 5193b3e099b9..3997aa49c75b 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -15,7 +15,7 @@ CONFIG_SH_AP325RXA=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 6a82c7b8ff32..ac030c1a351e 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -22,7 +22,7 @@ CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_NR_DMA_CHANNELS=9
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
CONFIG_MAPLE=y
CONFIG_PCI=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
index 5c60e71d839e..db78857ae30f 100644
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -14,7 +14,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_ECOVEC=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200"
# CONFIG_SUSPEND is not set
CONFIG_NET=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 03cb916819fa..f6f7d2e1840d 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -16,7 +16,7 @@ CONFIG_SH_ECOVEC=y
CONFIG_HEARTBEAT=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index d77f54e906fd..1ac8eb89c550 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -19,7 +19,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index 2804cb760a76..1bffacbaba3d 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -14,7 +14,7 @@ CONFIG_MEMORY_START=0x0c000000
CONFIG_SH_ESPT=y
CONFIG_SH_PCLK_FREQ=66666666
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/j2_defconfig b/arch/sh/configs/j2_defconfig
index 2eb81ebe3888..983c62e936eb 100644
--- a/arch/sh/configs/j2_defconfig
+++ b/arch/sh/configs/j2_defconfig
@@ -10,7 +10,7 @@ CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SH_DEVICE_TREE=y
CONFIG_SH_JCORE_SOC=y
CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttyUL0 earlycon"
CONFIG_BINFMT_ELF_FDPIC=y
CONFIG_BINFMT_FLAT=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
index 04436b4fbd76..8418c1f0c1ce 100644
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -15,7 +15,7 @@ CONFIG_SH_KFR2R09=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_HZ_100=y
CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 quiet"
# CONFIG_SUSPEND is not set
CONFIG_NET=y
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index 833404490cfe..0b04d179ebba 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -19,7 +19,7 @@ CONFIG_NO_HZ=y
CONFIG_HZ_1000=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
# CONFIG_SUSPEND is not set
CONFIG_CPU_IDLE=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index 05e4ac6fed5f..498c88953d2a 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -12,7 +12,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_LBOX_RE2=y
CONFIG_SH_PCLK_FREQ=40000000
CONFIG_KEXEC=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_PCCARD=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e9825196dd66..8467de1d3092 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -11,7 +11,7 @@ CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
CONFIG_SUPERHYWAY=y
CONFIG_NET=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 4859cd30cfc4..e43fb2a63f1f 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -15,7 +15,7 @@ CONFIG_NUMA=y
CONFIG_SH_MIGOR=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index 246408ec7462..2fc2bdc0e002 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -25,7 +25,7 @@ CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_HZ_100=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index f823cc6b18f9..9e2438114890 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -20,7 +20,7 @@ CONFIG_SH_PCLK_FREQ=33333333
CONFIG_PUSH_SWITCH=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_NET=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index f96bc20d4b1a..c1c92f154694 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -26,7 +26,7 @@ CONFIG_HEARTBEAT=y
CONFIG_PUSH_SWITCH=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_BINFMT_MISC=m
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index e41526120be1..65f3d695bc78 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -21,7 +21,7 @@ CONFIG_CPU_BIG_ENDIAN=y
CONFIG_SH_RSK=y
CONFIG_SH_PCLK_FREQ=40000000
CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 6af08fa1ddf8..33f608c54b85 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y
CONFIG_SH_CPU_FREQ=y
CONFIG_HEARTBEAT=y
CONFIG_HZ_1000=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 96263a4912b7..131699a6daa7 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -11,7 +11,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_1=y
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 92e586e6c974..ffa76ad8efaa 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -11,7 +11,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_RTS7751R2D=y
CONFIG_RTS7751R2D_PLUS=y
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 6c719ab4332a..a33f81c41a13 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -22,7 +22,7 @@ CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
CONFIG_PCI=y
CONFIG_PCI_DEBUG=y
diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig
index f776a1d0d277..1daf3dbffc16 100644
--- a/arch/sh/configs/sdk7786_defconfig
+++ b/arch/sh/configs/sdk7786_defconfig
@@ -70,7 +70,7 @@ CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_INTC_USERIMASK=y
CONFIG_INTC_BALANCING=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200 root=/dev/sda1 nmi_debug=state,debounce rootdelay=5 pmb=iomap ignore_loglevel"
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 315b04a8dd2f..c729ddb5d2c8 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -36,7 +36,7 @@ CONFIG_SH_CPU_FREQ=y
CONFIG_HEARTBEAT=y
CONFIG_HZ_1000=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 5d6c19338ebf..32fedfd8ae81 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -17,7 +17,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_7343_SOLUTION_ENGINE=y
# CONFIG_SH_TIMER_CMT is not set
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index ee6d28ae08de..02a8dcb898db 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -22,7 +22,7 @@ CONFIG_SH_SOLUTION_ENGINE=y
CONFIG_SH_PCLK_FREQ=66666666
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index bad921bc10f8..a0ce6eca3bf5 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -22,7 +22,7 @@ CONFIG_SH_7721_SOLUTION_ENGINE=y
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index a26f7f1841c7..9cd50acd959d 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -17,7 +17,7 @@ CONFIG_SH_DMA_API=y
CONFIG_HEARTBEAT=y
CONFIG_SECCOMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index 4a024065bb75..8c2beb3677e2 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -12,7 +12,7 @@ CONFIG_MEMORY_START=0x0c000000
CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_7751_SOLUTION_ENGINE=y
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,38400"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index dcd85b858ac8..3be23f65c38e 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -14,7 +14,7 @@ CONFIG_MEMORY_SIZE=0x08000000
CONFIG_SH_7780_SOLUTION_ENGINE=y
CONFIG_SH_PCLK_FREQ=33333333
CONFIG_HEARTBEAT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_PCI=y
CONFIG_NET=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index ff502683132e..87e9805b76d0 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -16,7 +16,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_SH03=y
CONFIG_HEARTBEAT=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig
index 99975db461d8..8e92c58316db 100644
--- a/arch/sh/configs/sh2007_defconfig
+++ b/arch/sh/configs/sh2007_defconfig
@@ -20,7 +20,7 @@ CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_HZ_100=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
CONFIG_PCCARD=y
CONFIG_BINFMT_MISC=y
diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig
index a2700ab165af..a15877daff16 100644
--- a/arch/sh/configs/sh7757lcr_defconfig
+++ b/arch/sh/configs/sh7757lcr_defconfig
@@ -21,7 +21,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_SH_SH7757LCR=y
CONFIG_HEARTBEAT=y
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 8a6a446f9eb8..351ccabac8a6 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -14,7 +14,7 @@ CONFIG_MEMORY_START=0x0c000000
CONFIG_SH_SH7763RDP=y
CONFIG_SH_PCLK_FREQ=66666666
CONFIG_SECCOMP=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index c0b6f40d01cc..7cc8725951f5 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -18,7 +18,7 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SH_ADC is not set
CONFIG_SH_SHMIN=y
CONFIG_SH_PCLK_FREQ=32000000
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
CONFIG_NET=y
CONFIG_UNIX=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 32ec6eb1eabc..36cac3067cef 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -47,7 +47,7 @@ CONFIG_KEXEC=y
CONFIG_SECCOMP=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index ba887f1351be..5aa513d54df0 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -20,7 +20,7 @@ CONFIG_SH_PCLK_FREQ=30000000
CONFIG_SH_DMA=y
CONFIG_SH_DMA_API=y
CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 103b81ec1ffb..8d8b6787302f 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -18,7 +18,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_HZ_100=y
CONFIG_KEXEC=y
CONFIG_PREEMPT=y
-CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE_FORCE=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 4144be650d41..303b8658a870 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -32,6 +32,7 @@
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/uaccess.h>
+#include <linux/cmdline.h>
#include <uapi/linux/mount.h>
#include <asm/io.h>
#include <asm/page.h>
@@ -306,15 +307,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = virt_to_phys(__bss_start);
bss_resource.end = virt_to_phys(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_OVERWRITE
- strlcpy(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#else
- strlcpy(command_line, COMMAND_LINE, sizeof(command_line));
-#ifdef CONFIG_CMDLINE_EXTEND
- strlcat(command_line, " ", sizeof(command_line));
- strlcat(command_line, CONFIG_CMDLINE, sizeof(command_line));
-#endif
-#endif
+ cmdline_build(command_line, COMMAND_LINE, sizeof(command_line));
/* Save unparsed command line copy for /proc/cmdline */
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PATCH v3 12/17] sh: Convert to GENERIC_CMDLINE
2021-03-26 13:44 ` [PATCH v3 12/17] sh: " Christophe Leroy
@ 2021-04-02 15:36 ` Christophe Leroy
0 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:36 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, microblaze, linux-xtensa, linux-sh,
linux-hexagon, x86, linux-kernel, nios2, linux-mips, openrisc,
sparclinux, linux-riscv, linuxppc-dev, linux-arm-kernel
Le 26/03/2021 à 14:44, Christophe Leroy a écrit :
> This converts the architecture to GENERIC_CMDLINE.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
> index e798e55915c2..fab84f62448c 100644
> --- a/arch/sh/Kconfig
> +++ b/arch/sh/Kconfig
> @@ -16,6 +16,7 @@ config SUPERH
> select CPU_NO_EFFICIENT_FFS
> select DMA_DECLARE_COHERENT
> select GENERIC_ATOMIC64
> + select GENERIC_CMDLINE
> select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
> select GENERIC_IDLE_POLL_SETUP
> select GENERIC_IRQ_SHOW
> @@ -742,35 +743,6 @@ config ROMIMAGE_MMCIF
> first part of the romImage which in turn loads the rest the kernel
> image to RAM using the MMCIF hardware block.
>
> -choice
> - prompt "Kernel command line"
> - optional
> - default CMDLINE_OVERWRITE
> - help
> - Setting this option allows the kernel command line arguments
> - to be set.
> -
> -config CMDLINE_OVERWRITE
> - bool "Overwrite bootloader kernel arguments"
> - help
> - Given string will overwrite any arguments passed in by
> - a bootloader.
> -
> -config CMDLINE_EXTEND
> - bool "Extend bootloader kernel arguments"
> - help
> - Given string will be concatenated with arguments passed in
> - by a bootloader.
> -
> -endchoice
> -
> -config CMDLINE
> - string "Kernel command line arguments string"
> - depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
> - default "console=ttySC1,115200"
> -
> -endmenu
> -
That "endmenu" shall not be removed.
Fixed in v4,
Thanks to Rob L. for the report.
Christophe
> menu "Bus options"
>
> config SUPERHYWAY
^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH v3 13/17] sparc: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (11 preceding siblings ...)
2021-03-26 13:44 ` [PATCH v3 12/17] sh: " Christophe Leroy
@ 2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 14/17] xtensa: " Christophe Leroy
` (4 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:45 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/sparc/Kconfig | 18 +-----------------
arch/sparc/prom/bootstr_64.c | 2 +-
2 files changed, 2 insertions(+), 18 deletions(-)
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 164a5254c91c..2a197f3a2549 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -50,6 +50,7 @@ config SPARC
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select SET_FS
+ select GENERIC_CMDLINE if SPARC64
config SPARC32
def_bool !64BIT
@@ -313,23 +314,6 @@ config SCHED_MC
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
- depends on SPARC64
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,9600 root=/dev/sda1"
- help
- Say Y here if you want to be able to pass default arguments to
- the kernel. This will be overridden by the bootloader, if you
- use one (such as SILO). This is most useful if you want to boot
- a kernel from TFTP, and want default options to be available
- with having them passed on the command line.
-
- NOTE: This option WILL override the PROM bootargs setting!
-
config SUN_PM
bool
default y if SPARC32
diff --git a/arch/sparc/prom/bootstr_64.c b/arch/sparc/prom/bootstr_64.c
index f1cc34d99eec..4853a45b3de9 100644
--- a/arch/sparc/prom/bootstr_64.c
+++ b/arch/sparc/prom/bootstr_64.c
@@ -25,7 +25,7 @@ struct {
char bootstr_buf[BARG_LEN];
} bootstr_info = {
.bootstr_len = BARG_LEN,
-#ifdef CONFIG_CMDLINE
+#if CONFIG_CMDLINE != ""
.bootstr_valid = 1,
.bootstr_buf = CONFIG_CMDLINE,
#endif
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 14/17] xtensa: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (12 preceding siblings ...)
2021-03-26 13:45 ` [PATCH v3 13/17] sparc: " Christophe Leroy
@ 2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 15/17] x86: " Christophe Leroy
` (3 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:45 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/xtensa/Kconfig | 15 +--------------
arch/xtensa/configs/audio_kc705_defconfig | 1 -
arch/xtensa/configs/common_defconfig | 1 -
arch/xtensa/configs/generic_kc705_defconfig | 1 -
arch/xtensa/configs/iss_defconfig | 1 -
arch/xtensa/configs/nommu_kc705_defconfig | 1 -
arch/xtensa/configs/smp_lx200_defconfig | 1 -
arch/xtensa/configs/virt_defconfig | 1 -
arch/xtensa/configs/xip_kc705_defconfig | 1 -
arch/xtensa/kernel/setup.c | 10 ++--------
10 files changed, 3 insertions(+), 30 deletions(-)
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9ad6b7b82707..42309f5e9cda 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -16,6 +16,7 @@ config XTENSA
select COMMON_CLK
select DMA_REMAP if MMU
select GENERIC_ATOMIC64
+ select GENERIC_CMDLINE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
@@ -353,20 +354,6 @@ config GENERIC_CALIBRATE_DELAY
help
The BogoMIPS value can easily be derived from the CPU frequency.
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttyS0,38400 root=/dev/ram"
- help
- On some architectures (EBSA110 and CATS), there is currently no way
- for the boot loader to pass arguments to the kernel. For these
- architectures, you should supply some command-line options at build
- time by entering them here. As a minimum, you should specify the
- memory size and the root device (e.g., mem=64M root=/dev/nfs).
-
config USE_OF
bool "Flattened Device Tree support"
select OF
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
index 3be62da8089b..5f8661a33ab4 100644
--- a/arch/xtensa/configs/audio_kc705_defconfig
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -27,7 +27,6 @@ CONFIG_PREEMPT=y
CONFIG_HIGHMEM=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
index fa9389869154..6467ebcbb080 100644
--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -6,7 +6,6 @@ CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_XTENSA_PLATFORM_XT2000=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
CONFIG_BINFMT_MISC=y
CONFIG_NET=y
diff --git a/arch/xtensa/configs/generic_kc705_defconfig b/arch/xtensa/configs/generic_kc705_defconfig
index e9d6b6f6eca1..8984c4e68a42 100644
--- a/arch/xtensa/configs/generic_kc705_defconfig
+++ b/arch/xtensa/configs/generic_kc705_defconfig
@@ -26,7 +26,6 @@ CONFIG_PREEMPT=y
CONFIG_HIGHMEM=y
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index 32ce8fb068f0..996ad115264d 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -2,7 +2,6 @@ CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_PCI is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
index 88b2e222d4bf..54250bc74885 100644
--- a/arch/xtensa/configs/nommu_kc705_defconfig
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -33,7 +33,6 @@ CONFIG_PREEMPT=y
CONFIG_MEMMAP_CACHEATTR=0xfff2442f
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=256M@0x60000000"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705_nommu"
diff --git a/arch/xtensa/configs/smp_lx200_defconfig b/arch/xtensa/configs/smp_lx200_defconfig
index a47c85638ec1..58b284fd627f 100644
--- a/arch/xtensa/configs/smp_lx200_defconfig
+++ b/arch/xtensa/configs/smp_lx200_defconfig
@@ -30,7 +30,6 @@ CONFIG_HOTPLUG_CPU=y
# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
# CONFIG_PCI is not set
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=96M@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="lx200mx"
diff --git a/arch/xtensa/configs/virt_defconfig b/arch/xtensa/configs/virt_defconfig
index 6d1387dfa96f..fb4dce2c70a3 100644
--- a/arch/xtensa/configs/virt_defconfig
+++ b/arch/xtensa/configs/virt_defconfig
@@ -21,7 +21,6 @@ CONFIG_XTENSA_VARIANT_DC233C=y
CONFIG_XTENSA_UNALIGNED_USER=y
CONFIG_XTENSA_KSEG_512M=y
CONFIG_HIGHMEM=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x80000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="virt"
diff --git a/arch/xtensa/configs/xip_kc705_defconfig b/arch/xtensa/configs/xip_kc705_defconfig
index 4f1ff9531f6a..ae4427773af2 100644
--- a/arch/xtensa/configs/xip_kc705_defconfig
+++ b/arch/xtensa/configs/xip_kc705_defconfig
@@ -26,7 +26,6 @@ CONFIG_KERNEL_LOAD_ADDRESS=0xf6000000
CONFIG_XTENSA_KSEG_512M=y
CONFIG_HIGHMEM=y
CONFIG_XTENSA_PLATFORM_XTFPGA=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000@0"
CONFIG_USE_OF=y
CONFIG_BUILTIN_DTB_SOURCE="kc705"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index ed184106e4cf..9703c23a9c3f 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -25,6 +25,7 @@
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
+#include <linux/cmdline.h>
#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
# include <linux/console.h>
@@ -73,10 +74,6 @@ extern unsigned long loops_per_jiffy;
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-#endif
-
#ifdef CONFIG_PARSE_BOOTPARAM
/*
* Boot parameter parsing.
@@ -257,10 +254,7 @@ void __init init_arch(bp_tag_t *bp_start)
early_init_devtree(dtb_start);
#endif
-#ifdef CONFIG_CMDLINE_BOOL
- if (!command_line[0])
- strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
-#endif
+ cmdline(command_line, command_line, COMMAND_LINE_SIZE);
/* Early hook for platforms */
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 15/17] x86: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (13 preceding siblings ...)
2021-03-26 13:45 ` [PATCH v3 14/17] xtensa: " Christophe Leroy
@ 2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 16/17] mips: " Christophe Leroy
` (2 subsequent siblings)
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:45 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/x86/Kconfig | 45 ++-----------------------
arch/x86/kernel/setup.c | 17 ++--------
drivers/firmware/efi/libstub/x86-stub.c | 26 +++++++-------
3 files changed, 18 insertions(+), 70 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2792879d398e..66b384228ca3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -104,6 +104,7 @@ config X86
select ARCH_USE_QUEUED_SPINLOCKS
select ARCH_USE_SYM_ANNOTATIONS
select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+ select ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
select ARCH_WANT_DEFAULT_BPF_JIT if X86_64
select ARCH_WANTS_DYNAMIC_TASK_STRUCT
select ARCH_WANT_HUGE_PMD_SHARE
@@ -118,6 +119,7 @@ config X86
select EDAC_SUPPORT
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
@@ -2358,49 +2360,6 @@ choice
endchoice
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- Allow for specifying boot arguments to the kernel at
- build time. On some systems (e.g. embedded ones), it is
- necessary or convenient to provide some or all of the
- kernel boot arguments with the kernel itself (that is,
- to not rely on the boot loader to provide them.)
-
- To compile command line arguments into the kernel,
- set this option to 'Y', then fill in the
- boot arguments in CONFIG_CMDLINE.
-
- Systems with fully functional boot loaders (i.e. non-embedded)
- should leave this option set to 'N'.
-
-config CMDLINE
- string "Built-in kernel command string"
- depends on CMDLINE_BOOL
- default ""
- help
- Enter arguments here that should be compiled into the kernel
- image and used at boot time. If the boot loader provides a
- command line at boot time, it is appended to this string to
- form the full kernel command line, when the system boots.
-
- However, you can use the CONFIG_CMDLINE_OVERRIDE option to
- change this behavior.
-
- In most cases, the command line (whether built-in or provided
- by the boot loader) should specify the device for the root
- file system.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides boot loader arguments"
- depends on CMDLINE_BOOL && CMDLINE != ""
- help
- Set this option to 'Y' to have the kernel ignore the boot loader
- command line, and use ONLY the built-in command line.
-
- This is used to work around broken boot loaders. This should
- be set to 'N' under normal conditions.
-
config MODIFY_LDT_SYSCALL
bool "Enable the LDT (local descriptor table)" if EXPERT
default y
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d883176ef2ce..93ac57ea3e64 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -5,6 +5,7 @@
* This file contains the setup_arch() code, which handles the architecture-dependent
* parts of early kernel initialization.
*/
+#include <linux/cmdline.h>
#include <linux/console.h>
#include <linux/crash_dump.h>
#include <linux/dma-map-ops.h>
@@ -161,9 +162,6 @@ unsigned long saved_video_mode;
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
@@ -883,18 +881,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
+ cmdline_build(boot_command_line, boot_command_line, COMMAND_LINE_SIZE);
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..5413aff010ec 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -6,6 +6,7 @@
*
* ----------------------------------------------------------------------- */
+#include <linux/cmdline.h>
#include <linux/efi.h>
#include <linux/pci.h>
#include <linux/stddef.h>
@@ -674,6 +675,7 @@ unsigned long efi_main(efi_handle_t handle,
unsigned long buffer_start, buffer_end;
struct setup_header *hdr = &boot_params->hdr;
efi_status_t status;
+ char *cmdline;
efi_system_table = sys_table_arg;
@@ -735,22 +737,22 @@ unsigned long efi_main(efi_handle_t handle,
image_offset = 0;
}
-#ifdef CONFIG_CMDLINE_BOOL
- status = efi_parse_options(CONFIG_CMDLINE);
+ cmdline = kzalloc(COMMAND_LINE_SIZE, GFP_KERNEL);
+ if (cmdline) {
+ unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+ ((u64)boot_params->ext_cmd_line_ptr << 32));
+
+ cmdline_build(cmdline, (char *)cmdline_paddr, COMMAND_LINE_SIZE);
+ status = efi_parse_options(cmdline);
+ kfree(cmdline);
+ } else {
+ efi_err("Failed to allocate memory\n");
+ goto fail;
+ }
if (status != EFI_SUCCESS) {
efi_err("Failed to parse options\n");
goto fail;
}
-#endif
- if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
- ((u64)boot_params->ext_cmd_line_ptr << 32));
- status = efi_parse_options((char *)cmdline_paddr);
- if (status != EFI_SUCCESS) {
- efi_err("Failed to parse options\n");
- goto fail;
- }
- }
/*
* At this point, an initrd may already have been loaded by the
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 16/17] mips: Convert to GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (14 preceding siblings ...)
2021-03-26 13:45 ` [PATCH v3 15/17] x86: " Christophe Leroy
@ 2021-03-26 13:45 ` Christophe Leroy
2021-03-26 13:45 ` [PATCH v3 17/17] cmdline: Remove CONFIG_CMDLINE_EXTEND Christophe Leroy
2021-03-26 15:04 ` [PATCH v3 00/17] Implement GENERIC_CMDLINE Rob Herring
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:45 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
This converts the architecture to GENERIC_CMDLINE.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/mips/Kconfig | 1 +
arch/mips/Kconfig.debug | 44 -----------------------
arch/mips/configs/ar7_defconfig | 1 -
arch/mips/configs/bcm47xx_defconfig | 1 -
arch/mips/configs/bcm63xx_defconfig | 1 -
arch/mips/configs/bmips_be_defconfig | 1 -
arch/mips/configs/bmips_stb_defconfig | 1 -
arch/mips/configs/capcella_defconfig | 1 -
arch/mips/configs/ci20_defconfig | 1 -
arch/mips/configs/cu1000-neo_defconfig | 1 -
arch/mips/configs/cu1830-neo_defconfig | 1 -
arch/mips/configs/e55_defconfig | 1 -
arch/mips/configs/generic_defconfig | 1 -
arch/mips/configs/gpr_defconfig | 1 -
arch/mips/configs/loongson3_defconfig | 1 -
arch/mips/configs/mpc30x_defconfig | 1 -
arch/mips/configs/rt305x_defconfig | 1 -
arch/mips/configs/tb0219_defconfig | 1 -
arch/mips/configs/tb0226_defconfig | 1 -
arch/mips/configs/tb0287_defconfig | 1 -
arch/mips/configs/workpad_defconfig | 1 -
arch/mips/configs/xway_defconfig | 1 -
arch/mips/kernel/relocate.c | 4 +--
arch/mips/kernel/setup.c | 40 ++-------------------
arch/mips/pic32/pic32mzda/early_console.c | 2 +-
arch/mips/pic32/pic32mzda/init.c | 2 --
26 files changed, 5 insertions(+), 108 deletions(-)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d89efba3d8a4..a65ce9ddbfce 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
select CPU_PM if CPU_IDLE
select GENERIC_ATOMIC64 if !64BIT
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_GETTIMEOFDAY
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 7a8d94cdd493..b5a099c74eb6 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -30,50 +30,6 @@ config EARLY_PRINTK_8250
config USE_GENERIC_EARLY_PRINTK_8250
bool
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- For most systems, it is firmware or second stage bootloader that
- by default specifies the kernel command line options. However,
- it might be necessary or advantageous to either override the
- default kernel command line or add a few extra options to it.
- For such cases, this option allows you to hardcode your own
- command line options directly into the kernel. For that, you
- should choose 'Y' here, and fill in the extra boot arguments
- in CONFIG_CMDLINE.
-
- The built-in options will be concatenated to the default command
- line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
- command line will be ignored and replaced by the built-in string.
-
- Most MIPS systems will normally expect 'N' here and rely upon
- the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
- string "Default kernel command string"
- depends on CMDLINE_BOOL
- help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, and for the cases
- when you want to add some extra options to the command line or ignore
- the default command line, you can supply some command-line options at
- build time by entering them here. In other cases you can specify
- kernel args so that you don't have to set them up in board prom
- initialization routines.
-
- For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
- options.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides firmware arguments"
- depends on CMDLINE_BOOL
- help
- By setting this option to 'Y' you will have your kernel ignore
- command line arguments from firmware or second stage bootloader.
- Instead, the built-in command line will be used exclusively.
-
- Normally, you will choose 'N' here.
-
config SB1XXX_CORELIS
bool "Corelis Debugger"
depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index cf9c6329b807..5e8adcd799d0 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -120,5 +120,4 @@ CONFIG_SQUASHFS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 91ce75edbfb4..690f423509f0 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -77,5 +77,4 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index 861f680184b9..19b15424f669 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -65,5 +65,4 @@ CONFIG_PROC_KCORE=y
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index 032bb51defe8..2db7712acc5d 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -75,5 +75,4 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index 625bd2d7e685..bc1659d43ca7 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -86,5 +86,4 @@ CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 7bf8971af53b..300032a5caa0 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -87,5 +87,4 @@ CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_HW is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index ab7ebb066834..f874e421b54f 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -203,5 +203,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon console=ttyS4,115200 clk_ignore_unused"
diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
index 9d75f5b77d5d..03cb524967e7 100644
--- a/arch/mips/configs/cu1000-neo_defconfig
+++ b/arch/mips/configs/cu1000-neo_defconfig
@@ -123,5 +123,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
index 29decd0003c6..d733ccab494e 100644
--- a/arch/mips/configs/cu1830-neo_defconfig
+++ b/arch/mips/configs/cu1830-neo_defconfig
@@ -126,5 +126,4 @@ CONFIG_PANIC_TIMEOUT=10
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_STACKTRACE=y
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon clk_ignore_unused"
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index fd82b858a8f0..ffc964d1bae7 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -33,5 +33,4 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x1f0,0x3f6,40 mem=8M"
diff --git a/arch/mips/configs/generic_defconfig b/arch/mips/configs/generic_defconfig
index 714169e411cf..6003f6c7aa09 100644
--- a/arch/mips/configs/generic_defconfig
+++ b/arch/mips/configs/generic_defconfig
@@ -88,5 +88,4 @@ CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 5cb91509bb7c..8998d28b94c8 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -306,5 +306,4 @@ CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig
index 0e79f81217bc..c4f9a236bd1f 100644
--- a/arch/mips/configs/loongson3_defconfig
+++ b/arch/mips/configs/loongson3_defconfig
@@ -408,5 +408,4 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ieee754=relaxed"
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index d4e038802510..6ecef2a666fc 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -49,5 +49,4 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_CONFIGFS_FS=m
CONFIG_NFS_FS=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=32M console=ttyVR0,19200 ide0=0x170,0x376,73"
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index fec5851c164b..c34441ce6621 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -147,4 +147,3 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 6547f84750b5..ccf20bd156a1 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -73,5 +73,4 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 7e099f7c2286..9f78fd00a4f6 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -68,5 +68,4 @@ CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 0d881dd862c0..5529d0dacf94 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -81,5 +81,4 @@ CONFIG_NFSD_V3=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 891a5f77305d..ee712f7b5575 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -61,5 +61,4 @@ CONFIG_TMPFS_POSIX_ACL=y
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
index 9abbc0debc2a..ebd8dbdb0695 100644
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -153,4 +153,3 @@ CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
-CONFIG_CMDLINE_BOOL=y
diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c
index 499a5357c09f..13c955027696 100644
--- a/arch/mips/kernel/relocate.c
+++ b/arch/mips/kernel/relocate.c
@@ -244,15 +244,13 @@ static inline __init unsigned long get_random_boot(void)
static inline __init bool kaslr_disabled(void)
{
char *str;
-
-#if defined(CONFIG_CMDLINE_BOOL)
const char *builtin_cmdline = CONFIG_CMDLINE;
str = strstr(builtin_cmdline, "nokaslr");
if (str == builtin_cmdline ||
(str > builtin_cmdline && *(str - 1) == ' '))
return true;
-#endif
+
str = strstr(arcs_cmdline, "nokaslr");
if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' '))
return true;
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 279be0153f8b..e1ba44843c49 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -29,6 +29,7 @@
#include <linux/of_fdt.h>
#include <linux/dmi.h>
#include <linux/crash_dump.h>
+#include <linux/cmdline.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
@@ -66,12 +67,6 @@ EXPORT_SYMBOL(mips_machtype);
static char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE;
-#else
-static const char builtin_cmdline[] __initconst = "";
-#endif
-
/*
* mips_io_port_base is the begin of the address space to which x86 style
* I/O ports are mapped.
@@ -546,28 +541,6 @@ static void __init bootcmdline_init(void)
{
bool dt_bootargs = false;
- /*
- * If CMDLINE_OVERRIDE is enabled then initializing the command line is
- * trivial - we simply use the built-in command line unconditionally &
- * unmodified.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- return;
- }
-
- /*
- * If the user specified a built-in command line &
- * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
- * prepended to arguments from the bootloader or DT so we'll copy them
- * to the start of boot_command_line here. Otherwise, empty
- * boot_command_line to undo anything early_init_dt_scan_chosen() did.
- */
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- else
- boot_command_line[0] = 0;
-
#ifdef CONFIG_OF_EARLY_FLATTREE
/*
* If we're configured to take boot arguments from DT, look for those
@@ -585,16 +558,7 @@ static void __init bootcmdline_init(void)
* plat_mem_setup() should have filled arcs_cmdline with arguments from
* the bootloader.
*/
- if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs)
- bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
-
- /*
- * If the user specified a built-in command line & we didn't already
- * prepend it, we append it to boot_command_line here.
- */
- if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
- !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
- bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
+ cmdline_build(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
}
/*
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
index 25372e62783b..94d3a5ba5e10 100644
--- a/arch/mips/pic32/pic32mzda/early_console.c
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -75,7 +75,7 @@ static char * __init pic32_getcmdline(void)
* arch_mem_init() has not been called yet, so we don't have a real
* command line setup if using CONFIG_CMDLINE_BOOL.
*/
-#ifdef CONFIG_CMDLINE_OVERRIDE
+#ifdef CONFIG_CMDLINE_FORCE
return CONFIG_CMDLINE;
#else
return fw_getcmdline();
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
index 764f2d022fae..39fdacbbac56 100644
--- a/arch/mips/pic32/pic32mzda/init.c
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -40,9 +40,7 @@ void __init plat_mem_setup(void)
pr_info("Found following command lines\n");
pr_info(" boot_command_line: %s\n", boot_command_line);
pr_info(" arcs_cmdline : %s\n", arcs_cmdline);
-#ifdef CONFIG_CMDLINE_BOOL
pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE);
-#endif
if (dtb != __dtb_start)
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* [PATCH v3 17/17] cmdline: Remove CONFIG_CMDLINE_EXTEND
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (15 preceding siblings ...)
2021-03-26 13:45 ` [PATCH v3 16/17] mips: " Christophe Leroy
@ 2021-03-26 13:45 ` Christophe Leroy
2021-03-26 15:04 ` [PATCH v3 00/17] Implement GENERIC_CMDLINE Rob Herring
17 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-03-26 13:45 UTC (permalink / raw)
To: will, danielwa, robh, daniel
Cc: linux-arch, devicetree, linuxppc-dev, linux-kernel, linuxppc-dev,
linux-arm-kernel, microblaze, linux-mips, nios2, openrisc,
linux-hexagon, linux-riscv, x86, linux-xtensa, linux-sh,
sparclinux
All architectures providing CONFIG_CMDLINE_EXTEND
are now converted to GENERIC_CMDLINE.
This configuration item is not used anymore, drop it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
init/Kconfig | 6 ------
1 file changed, 6 deletions(-)
diff --git a/init/Kconfig b/init/Kconfig
index af0d84662cc2..fa002e3765ab 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -163,12 +163,6 @@ config CMDLINE_FORCE
arguments provided by the bootloader.
endchoice
-config CMDLINE_EXTEND
- bool
- default CMDLINE_APPEND
- help
- To be removed once all architectures are converted to generic CMDLINE
-
config COMPILE_TEST
bool "Compile also drivers which will not load"
depends on HAS_IOMEM
--
2.25.0
^ permalink raw reply related [flat|nested] 40+ messages in thread* Re: [PATCH v3 00/17] Implement GENERIC_CMDLINE
2021-03-26 13:44 [PATCH v3 00/17] Implement GENERIC_CMDLINE Christophe Leroy
` (16 preceding siblings ...)
2021-03-26 13:45 ` [PATCH v3 17/17] cmdline: Remove CONFIG_CMDLINE_EXTEND Christophe Leroy
@ 2021-03-26 15:04 ` Rob Herring
2021-04-02 15:20 ` Christophe Leroy
17 siblings, 1 reply; 40+ messages in thread
From: Rob Herring @ 2021-03-26 15:04 UTC (permalink / raw)
To: Christophe Leroy
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
<christophe.leroy@csgroup.eu> wrote:
>
> The purpose of this series is to improve and enhance the
> handling of kernel boot arguments.
>
> It is first focussed on powerpc but also extends the capability
> for other arches.
>
> This is based on suggestion from Daniel Walker <danielwa@cisco.com>
>
> Main changes in V3:
> - Also accept destination equal to source in cmdline_build() by setting a tmp buffer in __initdata. Powerpc provides different source and destination and call __cmdline_build() directly.
> - Taken comments received from Will and Rob
> - Converted all architectures (Only tested on powerpc)
>
> Christophe Leroy (17):
> cmdline: Add generic function to build command line.
> drivers: of: use cmdline building function
> cmdline: Gives architectures opportunity to use generically defined
> boot cmdline manipulation
> powerpc: Convert to GENERIC_CMDLINE
> arm: Convert to GENERIC_CMDLINE
> arm64: Convert to GENERIC_CMDLINE
> hexagon: Convert to GENERIC_CMDLINE
> microblaze: Convert to GENERIC_CMDLINE
> nios2: Convert to GENERIC_CMDLINE
> openrisc: Convert to GENERIC_CMDLINE
> riscv: Convert to GENERIC_CMDLINE
> sh: Convert to GENERIC_CMDLINE
> sparc: Convert to GENERIC_CMDLINE
> xtensa: Convert to GENERIC_CMDLINE
> x86: Convert to GENERIC_CMDLINE
> mips: Convert to GENERIC_CMDLINE
> cmdline: Remove CONFIG_CMDLINE_EXTEND
>
> arch/arm/Kconfig | 38 +-------------
> arch/arm/kernel/atags_parse.c | 15 ++----
> arch/arm64/Kconfig | 33 +-----------
> arch/arm64/kernel/idreg-override.c | 9 ++--
> arch/hexagon/Kconfig | 11 +---
> arch/hexagon/kernel/setup.c | 10 +---
> arch/microblaze/Kconfig | 24 +--------
> arch/microblaze/configs/mmu_defconfig | 2 +-
> arch/microblaze/kernel/head.S | 4 +-
> arch/mips/Kconfig | 1 +
> arch/mips/Kconfig.debug | 44 ----------------
> arch/mips/configs/ar7_defconfig | 1 -
> arch/mips/configs/bcm47xx_defconfig | 1 -
> arch/mips/configs/bcm63xx_defconfig | 1 -
> arch/mips/configs/bmips_be_defconfig | 1 -
> arch/mips/configs/bmips_stb_defconfig | 1 -
> arch/mips/configs/capcella_defconfig | 1 -
> arch/mips/configs/ci20_defconfig | 1 -
> arch/mips/configs/cu1000-neo_defconfig | 1 -
> arch/mips/configs/cu1830-neo_defconfig | 1 -
> arch/mips/configs/e55_defconfig | 1 -
> arch/mips/configs/generic_defconfig | 1 -
> arch/mips/configs/gpr_defconfig | 1 -
> arch/mips/configs/loongson3_defconfig | 1 -
> arch/mips/configs/mpc30x_defconfig | 1 -
> arch/mips/configs/rt305x_defconfig | 1 -
> arch/mips/configs/tb0219_defconfig | 1 -
> arch/mips/configs/tb0226_defconfig | 1 -
> arch/mips/configs/tb0287_defconfig | 1 -
> arch/mips/configs/workpad_defconfig | 1 -
> arch/mips/configs/xway_defconfig | 1 -
> arch/mips/kernel/relocate.c | 4 +-
> arch/mips/kernel/setup.c | 40 +--------------
> arch/mips/pic32/pic32mzda/early_console.c | 2 +-
> arch/mips/pic32/pic32mzda/init.c | 2 -
> arch/nios2/Kconfig | 24 +--------
> arch/nios2/kernel/setup.c | 13 ++---
> arch/openrisc/Kconfig | 10 +---
> arch/powerpc/Kconfig | 37 +------------
> arch/powerpc/kernel/prom_init.c | 17 +++---
> arch/riscv/Kconfig | 44 +---------------
> arch/riscv/kernel/setup.c | 5 +-
> arch/sh/Kconfig | 30 +----------
> arch/sh/configs/ap325rxa_defconfig | 2 +-
> arch/sh/configs/dreamcast_defconfig | 2 +-
> arch/sh/configs/ecovec24-romimage_defconfig | 2 +-
> arch/sh/configs/ecovec24_defconfig | 2 +-
> arch/sh/configs/edosk7760_defconfig | 2 +-
> arch/sh/configs/espt_defconfig | 2 +-
> arch/sh/configs/j2_defconfig | 2 +-
> arch/sh/configs/kfr2r09-romimage_defconfig | 2 +-
> arch/sh/configs/kfr2r09_defconfig | 2 +-
> arch/sh/configs/lboxre2_defconfig | 2 +-
> arch/sh/configs/microdev_defconfig | 2 +-
> arch/sh/configs/migor_defconfig | 2 +-
> arch/sh/configs/polaris_defconfig | 2 +-
> arch/sh/configs/r7780mp_defconfig | 2 +-
> arch/sh/configs/r7785rp_defconfig | 2 +-
> arch/sh/configs/rsk7201_defconfig | 2 +-
> arch/sh/configs/rsk7203_defconfig | 2 +-
> arch/sh/configs/rts7751r2d1_defconfig | 2 +-
> arch/sh/configs/rts7751r2dplus_defconfig | 2 +-
> arch/sh/configs/sdk7780_defconfig | 2 +-
> arch/sh/configs/sdk7786_defconfig | 2 +-
> arch/sh/configs/se7206_defconfig | 2 +-
> arch/sh/configs/se7343_defconfig | 2 +-
> arch/sh/configs/se7712_defconfig | 2 +-
> arch/sh/configs/se7721_defconfig | 2 +-
> arch/sh/configs/se7724_defconfig | 2 +-
> arch/sh/configs/se7751_defconfig | 2 +-
> arch/sh/configs/se7780_defconfig | 2 +-
> arch/sh/configs/sh03_defconfig | 2 +-
> arch/sh/configs/sh2007_defconfig | 2 +-
> arch/sh/configs/sh7757lcr_defconfig | 2 +-
> arch/sh/configs/sh7763rdp_defconfig | 2 +-
> arch/sh/configs/shmin_defconfig | 2 +-
> arch/sh/configs/shx3_defconfig | 2 +-
> arch/sh/configs/titan_defconfig | 2 +-
> arch/sh/configs/ul2_defconfig | 2 +-
> arch/sh/kernel/setup.c | 11 +---
> arch/sparc/Kconfig | 18 +------
> arch/sparc/prom/bootstr_64.c | 2 +-
> arch/x86/Kconfig | 45 +---------------
> arch/x86/kernel/setup.c | 17 +-----
> arch/xtensa/Kconfig | 15 +-----
> arch/xtensa/configs/audio_kc705_defconfig | 1 -
> arch/xtensa/configs/common_defconfig | 1 -
> arch/xtensa/configs/generic_kc705_defconfig | 1 -
> arch/xtensa/configs/iss_defconfig | 1 -
> arch/xtensa/configs/nommu_kc705_defconfig | 1 -
> arch/xtensa/configs/smp_lx200_defconfig | 1 -
> arch/xtensa/configs/virt_defconfig | 1 -
> arch/xtensa/configs/xip_kc705_defconfig | 1 -
> arch/xtensa/kernel/setup.c | 10 +---
> drivers/firmware/efi/libstub/x86-stub.c | 26 +++++-----
You missed efi-stub.c which has CMDLINE_EXTEND.
> drivers/of/fdt.c | 23 ++-------
> include/linux/cmdline.h | 57 +++++++++++++++++++++
> init/Kconfig | 46 +++++++++++++++++
> 98 files changed, 209 insertions(+), 580 deletions(-)
> create mode 100644 include/linux/cmdline.h
>
> --
> 2.25.0
>
^ permalink raw reply [flat|nested] 40+ messages in thread* Re: [PATCH v3 00/17] Implement GENERIC_CMDLINE
2021-03-26 15:04 ` [PATCH v3 00/17] Implement GENERIC_CMDLINE Rob Herring
@ 2021-04-02 15:20 ` Christophe Leroy
0 siblings, 0 replies; 40+ messages in thread
From: Christophe Leroy @ 2021-04-02 15:20 UTC (permalink / raw)
To: Rob Herring
Cc: Will Deacon, Daniel Walker, Daniel Gimpelevich,
open list:GENERIC INCLUDE/ASM HEADER FILES, devicetree,
linuxppc-dev, linux-kernel, linux-arm-kernel, microblaze,
open list:MIPS, nios2, Openrisc, linux-hexagon, linux-riscv,
X86 ML, linux-xtensa, SH-Linux, sparclinux
Le 26/03/2021 à 16:04, Rob Herring a écrit :
> On Fri, Mar 26, 2021 at 7:44 AM Christophe Leroy
> <christophe.leroy@csgroup.eu> wrote:
>>
>> The purpose of this series is to improve and enhance the
>> handling of kernel boot arguments.
>>
>> It is first focussed on powerpc but also extends the capability
>> for other arches.
>>
>> This is based on suggestion from Daniel Walker <danielwa@cisco.com>
>>
>> Main changes in V3:
>> - Also accept destination equal to source in cmdline_build() by setting a tmp buffer in __initdata. Powerpc provides different source and destination and call __cmdline_build() directly.
>> - Taken comments received from Will and Rob
>> - Converted all architectures (Only tested on powerpc)
>>
>> Christophe Leroy (17):
>> cmdline: Add generic function to build command line.
>> drivers: of: use cmdline building function
>> cmdline: Gives architectures opportunity to use generically defined
>> boot cmdline manipulation
>> powerpc: Convert to GENERIC_CMDLINE
>> arm: Convert to GENERIC_CMDLINE
>> arm64: Convert to GENERIC_CMDLINE
>> hexagon: Convert to GENERIC_CMDLINE
>> microblaze: Convert to GENERIC_CMDLINE
>> nios2: Convert to GENERIC_CMDLINE
>> openrisc: Convert to GENERIC_CMDLINE
>> riscv: Convert to GENERIC_CMDLINE
>> sh: Convert to GENERIC_CMDLINE
>> sparc: Convert to GENERIC_CMDLINE
>> xtensa: Convert to GENERIC_CMDLINE
>> x86: Convert to GENERIC_CMDLINE
>> mips: Convert to GENERIC_CMDLINE
>> cmdline: Remove CONFIG_CMDLINE_EXTEND
>>
>> arch/arm/Kconfig | 38 +-------------
>> arch/arm/kernel/atags_parse.c | 15 ++----
>> arch/arm64/Kconfig | 33 +-----------
>> arch/arm64/kernel/idreg-override.c | 9 ++--
>> arch/hexagon/Kconfig | 11 +---
>> arch/hexagon/kernel/setup.c | 10 +---
>> arch/microblaze/Kconfig | 24 +--------
>> arch/microblaze/configs/mmu_defconfig | 2 +-
>> arch/microblaze/kernel/head.S | 4 +-
>> arch/mips/Kconfig | 1 +
>> arch/mips/Kconfig.debug | 44 ----------------
>> arch/mips/configs/ar7_defconfig | 1 -
>> arch/mips/configs/bcm47xx_defconfig | 1 -
>> arch/mips/configs/bcm63xx_defconfig | 1 -
>> arch/mips/configs/bmips_be_defconfig | 1 -
>> arch/mips/configs/bmips_stb_defconfig | 1 -
>> arch/mips/configs/capcella_defconfig | 1 -
>> arch/mips/configs/ci20_defconfig | 1 -
>> arch/mips/configs/cu1000-neo_defconfig | 1 -
>> arch/mips/configs/cu1830-neo_defconfig | 1 -
>> arch/mips/configs/e55_defconfig | 1 -
>> arch/mips/configs/generic_defconfig | 1 -
>> arch/mips/configs/gpr_defconfig | 1 -
>> arch/mips/configs/loongson3_defconfig | 1 -
>> arch/mips/configs/mpc30x_defconfig | 1 -
>> arch/mips/configs/rt305x_defconfig | 1 -
>> arch/mips/configs/tb0219_defconfig | 1 -
>> arch/mips/configs/tb0226_defconfig | 1 -
>> arch/mips/configs/tb0287_defconfig | 1 -
>> arch/mips/configs/workpad_defconfig | 1 -
>> arch/mips/configs/xway_defconfig | 1 -
>> arch/mips/kernel/relocate.c | 4 +-
>> arch/mips/kernel/setup.c | 40 +--------------
>> arch/mips/pic32/pic32mzda/early_console.c | 2 +-
>> arch/mips/pic32/pic32mzda/init.c | 2 -
>> arch/nios2/Kconfig | 24 +--------
>> arch/nios2/kernel/setup.c | 13 ++---
>> arch/openrisc/Kconfig | 10 +---
>> arch/powerpc/Kconfig | 37 +------------
>> arch/powerpc/kernel/prom_init.c | 17 +++---
>> arch/riscv/Kconfig | 44 +---------------
>> arch/riscv/kernel/setup.c | 5 +-
>> arch/sh/Kconfig | 30 +----------
>> arch/sh/configs/ap325rxa_defconfig | 2 +-
>> arch/sh/configs/dreamcast_defconfig | 2 +-
>> arch/sh/configs/ecovec24-romimage_defconfig | 2 +-
>> arch/sh/configs/ecovec24_defconfig | 2 +-
>> arch/sh/configs/edosk7760_defconfig | 2 +-
>> arch/sh/configs/espt_defconfig | 2 +-
>> arch/sh/configs/j2_defconfig | 2 +-
>> arch/sh/configs/kfr2r09-romimage_defconfig | 2 +-
>> arch/sh/configs/kfr2r09_defconfig | 2 +-
>> arch/sh/configs/lboxre2_defconfig | 2 +-
>> arch/sh/configs/microdev_defconfig | 2 +-
>> arch/sh/configs/migor_defconfig | 2 +-
>> arch/sh/configs/polaris_defconfig | 2 +-
>> arch/sh/configs/r7780mp_defconfig | 2 +-
>> arch/sh/configs/r7785rp_defconfig | 2 +-
>> arch/sh/configs/rsk7201_defconfig | 2 +-
>> arch/sh/configs/rsk7203_defconfig | 2 +-
>> arch/sh/configs/rts7751r2d1_defconfig | 2 +-
>> arch/sh/configs/rts7751r2dplus_defconfig | 2 +-
>> arch/sh/configs/sdk7780_defconfig | 2 +-
>> arch/sh/configs/sdk7786_defconfig | 2 +-
>> arch/sh/configs/se7206_defconfig | 2 +-
>> arch/sh/configs/se7343_defconfig | 2 +-
>> arch/sh/configs/se7712_defconfig | 2 +-
>> arch/sh/configs/se7721_defconfig | 2 +-
>> arch/sh/configs/se7724_defconfig | 2 +-
>> arch/sh/configs/se7751_defconfig | 2 +-
>> arch/sh/configs/se7780_defconfig | 2 +-
>> arch/sh/configs/sh03_defconfig | 2 +-
>> arch/sh/configs/sh2007_defconfig | 2 +-
>> arch/sh/configs/sh7757lcr_defconfig | 2 +-
>> arch/sh/configs/sh7763rdp_defconfig | 2 +-
>> arch/sh/configs/shmin_defconfig | 2 +-
>> arch/sh/configs/shx3_defconfig | 2 +-
>> arch/sh/configs/titan_defconfig | 2 +-
>> arch/sh/configs/ul2_defconfig | 2 +-
>> arch/sh/kernel/setup.c | 11 +---
>> arch/sparc/Kconfig | 18 +------
>> arch/sparc/prom/bootstr_64.c | 2 +-
>> arch/x86/Kconfig | 45 +---------------
>> arch/x86/kernel/setup.c | 17 +-----
>> arch/xtensa/Kconfig | 15 +-----
>> arch/xtensa/configs/audio_kc705_defconfig | 1 -
>> arch/xtensa/configs/common_defconfig | 1 -
>> arch/xtensa/configs/generic_kc705_defconfig | 1 -
>> arch/xtensa/configs/iss_defconfig | 1 -
>> arch/xtensa/configs/nommu_kc705_defconfig | 1 -
>> arch/xtensa/configs/smp_lx200_defconfig | 1 -
>> arch/xtensa/configs/virt_defconfig | 1 -
>> arch/xtensa/configs/xip_kc705_defconfig | 1 -
>> arch/xtensa/kernel/setup.c | 10 +---
>> drivers/firmware/efi/libstub/x86-stub.c | 26 +++++-----
>
> You missed efi-stub.c which has CMDLINE_EXTEND.
>
I think I completely missed EFI.
Reworked in V4.
^ permalink raw reply [flat|nested] 40+ messages in thread