linux-snps-arc.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
To: linux-snps-arc@lists.infradead.org,
	Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
	linux-kernel@vger.kernel.org
Subject: [RFC 6/6] ARC: merge HAPS-HS with nSIM-HS configs
Date: Fri, 18 Oct 2019 15:15:45 +0300	[thread overview]
Message-ID: <20191018121545.8907-7-Eugeniy.Paltsev@synopsys.com> (raw)
In-Reply-To: <20191018121545.8907-1-Eugeniy.Paltsev@synopsys.com>

Starting from nSIM 2019.06 is possible to use DW UART
instead of ARC UART. That allows us to merge
"nsim_hs" with "haps_hs" and "nsim_hs_smp" with "haps_hs_smp"
mith minor changes which were done in previous commits.

We eliminate nsim_hs_defconfig and nsim_hs_smp_defconfig
and leave haps_hs_defconfig and haps_hs_smp_defconfig
which can be used on HAPS / nSIM / ZEBU / QEMU platforms
without additionall changes in Linux kernel.

For nSIM we should now use UART property values
"-prop=nsim_mem-dev=uart0,kind=dwuart,base=0xf0000000"
instead of previously used
"-prop=nsim_mem-dev=uart0,base=0xc0fc1000"
"use_connect" and "irq" values of UART property remains untouched.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 arch/arc/boot/dts/nsim_hs.dts          | 67 --------------------------
 arch/arc/boot/dts/nsim_hs_idu.dts      | 65 -------------------------
 arch/arc/configs/nsim_hs_defconfig     | 56 ---------------------
 arch/arc/configs/nsim_hs_smp_defconfig | 54 ---------------------
 arch/arc/plat-sim/platform.c           |  1 -
 5 files changed, 243 deletions(-)
 delete mode 100644 arch/arc/boot/dts/nsim_hs.dts
 delete mode 100644 arch/arc/boot/dts/nsim_hs_idu.dts
 delete mode 100644 arch/arc/configs/nsim_hs_defconfig
 delete mode 100644 arch/arc/configs/nsim_hs_smp_defconfig

diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts
deleted file mode 100644
index 851798a5f4e3..000000000000
--- a/arch/arc/boot/dts/nsim_hs.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- */
-/dts-v1/;
-
-/include/ "skeleton_hs.dtsi"
-
-/ {
-	model = "snps,nsim_hs";
-	compatible = "snps,nsim_hs";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&core_intc>;
-
-	memory {
-		device_type = "memory";
-		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
-		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
-		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
-	};
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* only perip space at end of low mem accessible
-			 bus addr,   parent bus addr, size */
-		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-
-		core_clk: core_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupts = <24>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};
diff --git a/arch/arc/boot/dts/nsim_hs_idu.dts b/arch/arc/boot/dts/nsim_hs_idu.dts
deleted file mode 100644
index 6c559a0bd1f5..000000000000
--- a/arch/arc/boot/dts/nsim_hs_idu.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- */
-/dts-v1/;
-
-/include/ "skeleton_hs_idu.dtsi"
-
-/ {
-	model = "snps,nsim_hs-smp";
-	compatible = "snps,nsim_hs";
-	interrupt-parent = <&core_intc>;
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		core_clk: core_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		idu_intc: idu-interrupt-controller {
-			compatible = "snps,archs-idu-intc";
-			interrupt-controller;
-			interrupt-parent = <&core_intc>;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupt-parent = <&idu_intc>;
-			interrupts = <0>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};
diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
deleted file mode 100644
index 60ad81769565..000000000000
--- a/arch/arc/configs/nsim_hs_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_COMPACTION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
deleted file mode 100644
index c7a29adfc147..000000000000
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_COMPACTION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c
index 3765dedcd319..2bde2a6e336a 100644
--- a/arch/arc/plat-sim/platform.c
+++ b/arch/arc/plat-sim/platform.c
@@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = {
 	"snps,nsim",
 	"snps,nsimosci",
 #else
-	"snps,nsim_hs",
 	"snps,nsimosci_hs",
 	"snps,zebu_hs",
 #endif
-- 
2.21.0


_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

  parent reply	other threads:[~2019-10-18 12:15 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 12:15 [RFC 0/6] ARC: merge HAPS-HS with nSIM-HS configs Eugeniy Paltsev
2019-10-18 12:15 ` [RFC 1/6] ARC: regenerate nSIM and HAPS defconfigs Eugeniy Paltsev
2019-10-18 12:15 ` [RFC 2/6] ARC: HAPS: cleanup defconfigs from unused IO-related options Eugeniy Paltsev
2019-10-18 12:15 ` [RFC 3/6] ARC: HAPS: use same UART configuration everywhere Eugeniy Paltsev
2019-10-18 12:15 ` [RFC 4/6] ARC: HAPS: add HIGHMEM memory zone to DTS Eugeniy Paltsev
2019-10-18 12:15 ` [RFC 5/6] ARC: HAPS: cleanup defconfigs from unused ETH drivers Eugeniy Paltsev
2019-10-18 12:15 ` Eugeniy Paltsev [this message]
2019-10-18 19:07   ` [RFC 6/6] ARC: merge HAPS-HS with nSIM-HS configs Vineet Gupta
2019-10-18 18:48 ` [RFC 0/6] " Vineet Gupta
2019-10-22 18:18   ` Eugeniy Paltsev
2019-10-22 18:24     ` Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191018121545.8907-7-Eugeniy.Paltsev@synopsys.com \
    --to=eugeniy.paltsev@synopsys.com \
    --cc=Alexey.Brodkin@synopsys.com \
    --cc=Vineet.Gupta1@synopsys.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).