From: Vineet Gupta <Vineet.Gupta1@synopsys.com>
To: linux-snps-arc@lists.infradead.org
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>,
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Subject: [PATCH] ARC: fpu: preserve userspace fpu state
Date: Fri, 17 Jan 2020 16:49:04 -0800 [thread overview]
Message-ID: <20200118004905.30201-3-vgupta@synopsys.com> (raw)
In-Reply-To: <20200118004905.30201-1-vgupta@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/Kconfig | 15 +++------
arch/arc/include/asm/arcregs.h | 2 ++
arch/arc/include/asm/fpu.h | 54 ++++++++++++++++++++++++++++++++
arch/arc/include/asm/processor.h | 10 +-----
arch/arc/include/asm/switch_to.h | 17 ++--------
arch/arc/kernel/Makefile | 2 ++
arch/arc/kernel/fpu.c | 28 +++++++++++++++++
arch/arc/kernel/process.c | 8 ++++-
8 files changed, 101 insertions(+), 35 deletions(-)
create mode 100644 arch/arc/include/asm/fpu.h
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 3b074c4d31fb..2e56cd5277b7 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -352,9 +352,8 @@ config NODES_SHIFT
Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
zones.
-if ISA_ARCOMPACT
-
config ARC_COMPACT_IRQ_LEVELS
+ depends on ISA_ARCOMPACT
bool "Setup Timer IRQ as high Priority"
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
depends on !SMP
@@ -362,14 +361,10 @@ config ARC_COMPACT_IRQ_LEVELS
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
help
- Double Precision Floating Point unit had dedicated regs which
- need to be saved/restored across context-switch.
- Note that ARC FPU is overly simplistic, unlike say x86, which has
- hardware pieces to allow software to conditionally save/restore,
- based on actual usage of FPU by a task. Thus our implemn does
- this for all tasks in system.
-
-endif #ISA_ARCOMPACT
+ ARCompact FPU has internal registers to assist with Double precision
+ Floating Point operations. There are control and stauts registers
+ for floating point exceptions and rounding modes. These are
+ preserved across task context switch when enabled.
config ARC_CANT_LLSC
def_bool n
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 5134f0baf33c..f7e432448e4b 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -39,6 +39,8 @@
#define ARC_REG_CLUSTER_BCR 0xcf
#define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */
#define ARC_REG_LPB_CTRL 0x488 /* ARCv2 Loop Buffer control */
+#define ARC_REG_FPU_CTRL 0x300
+#define ARC_REG_FPU_STATUS 0x301
/* Common for ARCompact and ARCv2 status register */
#define ARC_REG_STATUS32 0x0A
diff --git a/arch/arc/include/asm/fpu.h b/arch/arc/include/asm/fpu.h
new file mode 100644
index 000000000000..d0e51b863f4c
--- /dev/null
+++ b/arch/arc/include/asm/fpu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ */
+
+#ifndef _ASM_ARC_FPU_H
+#define _ASM_ARC_FPU_H
+
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+ struct {
+ unsigned int l, h;
+ } aux_dpfp[2];
+};
+
+#define fpu_init_task(regs)
+
+#else
+
+/*
+ * ARCv2 FPU Control aux register
+ * - bits to enable Traps on Exceptions
+ * - Rounding mode
+ *
+ * ARCv2 FPU Status aux register
+ * - FPU exceptions flags (Inv, Div-by-Zero, overflow, underflow, inexact)
+ * - Flag Write Enable to clear flags explicitly (vs. by fpu instructions
+ * only
+ */
+
+struct arc_fpu {
+ unsigned int ctrl, status;
+};
+
+extern void fpu_init_task(struct pt_regs *regs);
+
+#endif /* !CONFIG_ISA_ARCOMPACT */
+
+extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+
+#else
+
+#define fpu_save_restore(p, n)
+
+#endif /* CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#endif /* _ASM_ARC_FPU_H */
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 706edeaa5583..ec532d1e0725 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -14,15 +14,7 @@
#ifndef __ASSEMBLY__
#include <asm/ptrace.h>
-
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-/* These DPFP regs need to be saved/restored across ctx-sw */
-struct arc_fpu {
- struct {
- unsigned int l, h;
- } aux_dpfp[2];
-};
-#endif
+#include <asm/fpu.h>
#ifdef CONFIG_ARC_PLAT_EZNPS
struct eznps_dp {
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index 77f123385e96..aadf65b2b56c 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -9,19 +9,7 @@
#ifndef __ASSEMBLY__
#include <linux/sched.h>
-
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-
-extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
-#define ARC_FPU_PREV(p, n) fpu_save_restore(p, n)
-#define ARC_FPU_NEXT(t)
-
-#else
-
-#define ARC_FPU_PREV(p, n)
-#define ARC_FPU_NEXT(n)
-
-#endif /* !CONFIG_ARC_FPU_SAVE_RESTORE */
+#include <asm/fpu.h>
#ifdef CONFIG_ARC_PLAT_EZNPS
extern void dp_save_restore(struct task_struct *p, struct task_struct *n);
@@ -36,9 +24,8 @@ struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
#define switch_to(prev, next, last) \
do { \
ARC_EZNPS_DP_PREV(prev, next); \
- ARC_FPU_PREV(prev, next); \
+ fpu_save_restore(prev, next); \
last = __switch_to(prev, next);\
- ARC_FPU_NEXT(next); \
mb(); \
} while (0)
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e784f5396dda..75539670431a 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -23,7 +23,9 @@ obj-$(CONFIG_PERF_EVENTS) += perf_event.o
obj-$(CONFIG_JUMP_LABEL) += jump_label.o
obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o
+ifdef CONFIG_ISA_ARCOMPACT
CFLAGS_fpu.o += -mdpfp
+endif
ifdef CONFIG_ARC_DW2_UNWIND
CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
index 07e22b563fbb..7bc534a7cd20 100644
--- a/arch/arc/kernel/fpu.c
+++ b/arch/arc/kernel/fpu.c
@@ -7,6 +7,9 @@
#include <linux/sched.h>
#include <asm/switch_to.h>
+#include <asm/fpu.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
/*
* To save/restore FPU regs, simplest scheme would use LR/SR insns.
@@ -50,3 +53,28 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2))
);
}
+
+#else
+
+void fpu_init_task(struct pt_regs *regs)
+{
+ /* default rounding mode */
+ write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
+
+ /* set "Write enable" to allow explicit write to exception flags */
+ write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+}
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+ struct arc_fpu *save = &prev->thread.fpu;
+ struct arc_fpu *restore = &next->thread.fpu;
+
+ save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
+ save->status = read_aux_reg(ARC_REG_FPU_STATUS);
+
+ write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
+ write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+}
+
+#endif
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index e1889ce3faf9..0ecde4405aaf 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -5,6 +5,8 @@
* Amit Bhor, Kanika Nema: Codito Technologies 2004
*/
+#include <asm/fpu.h>
+
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -264,7 +266,7 @@ int copy_thread(unsigned long clone_flags,
/*
* Do necessary setup to start up a new user task
*/
-void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
{
regs->sp = usp;
regs->ret = pc;
@@ -280,6 +282,10 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
regs->eflags = 0;
#endif
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+ fpu_init_task(regs);
+#endif
+
/* bogus seed values for debugging */
regs->lp_start = 0x10;
regs->lp_end = 0x80;
--
2.20.1
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
next prev parent reply other threads:[~2020-01-18 1:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-18 0:49 [PATCH 0/2] ARCv2 FPU registers save/restore Vineet Gupta
2020-01-18 0:49 ` [PATCH 1/2] ARC: fpu: declutter code, move bits out into fpu.h Vineet Gupta
2020-01-18 0:49 ` Vineet Gupta [this message]
2020-01-18 0:52 ` [PATCH] ARC: fpu: preserve userspace fpu state Vineet Gupta
2020-01-18 0:49 ` [PATCH 2/2] ARCv2: " Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200118004905.30201-3-vgupta@synopsys.com \
--to=vineet.gupta1@synopsys.com \
--cc=Eugeniy.Paltsev@synopsys.com \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).