From mboxrd@z Thu Jan 1 00:00:00 1970 From: aford173@gmail.com (Adam Ford) Date: Tue, 24 Sep 2019 12:52:35 -0500 Subject: [PATCH v2 00/21] Refine memblock API In-Reply-To: <1548057848-15136-1-git-send-email-rppt@linux.ibm.com> References: <1548057848-15136-1-git-send-email-rppt@linux.ibm.com> List-ID: Message-ID: To: linux-snps-arc@lists.infradead.org On Mon, Jan 21, 2019@2:05 AM Mike Rapoport wrote: > > Hi, > > Current memblock API is quite extensive and, which is more annoying, > duplicated. Except the low-level functions that allow searching for a free > memory region and marking it as reserved, memblock provides three (well, > two and a half) sets of functions to allocate memory. There are several > overlapping functions that return a physical address and there are > functions that return virtual address. Those that return the virtual > address may also clear the allocated memory. And, on top of all that, some > allocators panic and some return NULL in case of error. > > This set tries to reduce the mess, and trim down the amount of memblock > allocation methods. > > Patches 1-10 consolidate the functions that return physical address of > the allocated memory > > Patches 11-13 are some trivial cleanups > > Patches 14-19 add checks for the return value of memblock_alloc*() and > panics in case of errors. The patches 14-18 include some minor refactoring > to have better readability of the resulting code and patch 19 is a > mechanical addition of > > if (!ptr) > panic(); > > after memblock_alloc*() calls. > > And, finally, patches 20 and 21 remove panic() calls memblock and _nopanic > variants from memblock. > > v2 changes: > * replace some more %lu with %zu > * remove panics where they are not needed in s390 and in printk > * collect Acked-by and Reviewed-by. > > > Christophe Leroy (1): > powerpc: use memblock functions returning virtual address > > Mike Rapoport (20): > openrisc: prefer memblock APIs returning virtual address > memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc > memblock: drop memblock_alloc_base_nid() > memblock: emphasize that memblock_alloc_range() returns a physical address > memblock: memblock_phys_alloc_try_nid(): don't panic > memblock: memblock_phys_alloc(): don't panic > memblock: drop __memblock_alloc_base() > memblock: drop memblock_alloc_base() > memblock: refactor internal allocation functions > memblock: make memblock_find_in_range_node() and choose_memblock_flags() static > arch: use memblock_alloc() instead of memblock_alloc_from(size, align, 0) > arch: don't memset(0) memory returned by memblock_alloc() > ia64: add checks for the return value of memblock_alloc*() > sparc: add checks for the return value of memblock_alloc*() > mm/percpu: add checks for the return value of memblock_alloc*() > init/main: add checks for the return value of memblock_alloc*() > swiotlb: add checks for the return value of memblock_alloc*() > treewide: add checks for the return value of memblock_alloc*() > memblock: memblock_alloc_try_nid: don't panic > memblock: drop memblock_alloc_*_nopanic() variants > I know it's rather late, but this patch broke the Etnaviv 3D graphics in my i.MX6Q. When I try to use the 3D, it returns some errors and the dmesg log shows some memory allocation errors too: [ 3.682347] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 3.688669] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 3.695099] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 3.700800] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 3.723013] etnaviv-gpu 130000.gpu: command buffer outside valid memory window [ 3.731308] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 3.752437] etnaviv-gpu 134000.gpu: command buffer outside valid memory window [ 3.760583] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 3.766766] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 3.776131] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 # glmark2-es2-drm Error creating gpu Error: eglCreateWindowSurface failed with error: 0x3009 Error: eglCreateWindowSurface failed with error: 0x3009 Error: CanvasGeneric: Invalid EGL state Error: main: Could not initialize canvas Before this patch: [ 3.691995] etnaviv etnaviv: bound 130000.gpu (ops gpu_ops) [ 3.698356] etnaviv etnaviv: bound 134000.gpu (ops gpu_ops) [ 3.704792] etnaviv etnaviv: bound 2204000.gpu (ops gpu_ops) [ 3.710488] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108 [ 3.733649] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007 [ 3.756115] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215 [ 3.762250] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0 [ 3.771432] [drm] Initialized etnaviv 1.2.0 20151214 for etnaviv on minor 0 and the 3D gemos work without this. I don't know enough about the i.MX6 nor the 3D accelerator to know how to fix it. I am hoping someone in the know might have some suggestions. > arch/alpha/kernel/core_cia.c | 5 +- > arch/alpha/kernel/core_marvel.c | 6 + > arch/alpha/kernel/pci-noop.c | 13 +- > arch/alpha/kernel/pci.c | 11 +- > arch/alpha/kernel/pci_iommu.c | 16 +- > arch/alpha/kernel/setup.c | 2 +- > arch/arc/kernel/unwind.c | 3 +- > arch/arc/mm/highmem.c | 4 + > arch/arm/kernel/setup.c | 6 + > arch/arm/mm/init.c | 6 +- > arch/arm/mm/mmu.c | 14 +- > arch/arm64/kernel/setup.c | 8 +- > arch/arm64/mm/kasan_init.c | 10 ++ > arch/arm64/mm/mmu.c | 2 + > arch/arm64/mm/numa.c | 4 + > arch/c6x/mm/dma-coherent.c | 4 + > arch/c6x/mm/init.c | 4 +- > arch/csky/mm/highmem.c | 5 + > arch/h8300/mm/init.c | 4 +- > arch/ia64/kernel/mca.c | 25 +-- > arch/ia64/mm/contig.c | 8 +- > arch/ia64/mm/discontig.c | 4 + > arch/ia64/mm/init.c | 38 ++++- > arch/ia64/mm/tlb.c | 6 + > arch/ia64/sn/kernel/io_common.c | 3 + > arch/ia64/sn/kernel/setup.c | 12 +- > arch/m68k/atari/stram.c | 4 + > arch/m68k/mm/init.c | 3 + > arch/m68k/mm/mcfmmu.c | 7 +- > arch/m68k/mm/motorola.c | 9 ++ > arch/m68k/mm/sun3mmu.c | 6 + > arch/m68k/sun3/sun3dvma.c | 3 + > arch/microblaze/mm/init.c | 10 +- > arch/mips/cavium-octeon/dma-octeon.c | 3 + > arch/mips/kernel/setup.c | 3 + > arch/mips/kernel/traps.c | 5 +- > arch/mips/mm/init.c | 5 + > arch/nds32/mm/init.c | 12 ++ > arch/openrisc/mm/init.c | 5 +- > arch/openrisc/mm/ioremap.c | 8 +- > arch/powerpc/kernel/dt_cpu_ftrs.c | 8 +- > arch/powerpc/kernel/irq.c | 5 - > arch/powerpc/kernel/paca.c | 6 +- > arch/powerpc/kernel/pci_32.c | 3 + > arch/powerpc/kernel/prom.c | 5 +- > arch/powerpc/kernel/rtas.c | 6 +- > arch/powerpc/kernel/setup-common.c | 3 + > arch/powerpc/kernel/setup_32.c | 26 ++-- > arch/powerpc/kernel/setup_64.c | 4 + > arch/powerpc/lib/alloc.c | 3 + > arch/powerpc/mm/hash_utils_64.c | 11 +- > arch/powerpc/mm/mmu_context_nohash.c | 9 ++ > arch/powerpc/mm/numa.c | 4 + > arch/powerpc/mm/pgtable-book3e.c | 12 +- > arch/powerpc/mm/pgtable-book3s64.c | 3 + > arch/powerpc/mm/pgtable-radix.c | 9 +- > arch/powerpc/mm/ppc_mmu_32.c | 3 + > arch/powerpc/platforms/pasemi/iommu.c | 3 + > arch/powerpc/platforms/powermac/nvram.c | 3 + > arch/powerpc/platforms/powernv/opal.c | 3 + > arch/powerpc/platforms/powernv/pci-ioda.c | 8 + > arch/powerpc/platforms/ps3/setup.c | 3 + > arch/powerpc/sysdev/dart_iommu.c | 3 + > arch/powerpc/sysdev/msi_bitmap.c | 3 + > arch/s390/kernel/crash_dump.c | 3 + > arch/s390/kernel/setup.c | 16 ++ > arch/s390/kernel/smp.c | 9 +- > arch/s390/kernel/topology.c | 6 + > arch/s390/numa/mode_emu.c | 3 + > arch/s390/numa/numa.c | 6 +- > arch/sh/boards/mach-ap325rxa/setup.c | 5 +- > arch/sh/boards/mach-ecovec24/setup.c | 10 +- > arch/sh/boards/mach-kfr2r09/setup.c | 5 +- > arch/sh/boards/mach-migor/setup.c | 5 +- > arch/sh/boards/mach-se/7724/setup.c | 10 +- > arch/sh/kernel/machine_kexec.c | 3 +- > arch/sh/mm/init.c | 8 +- > arch/sh/mm/numa.c | 4 + > arch/sparc/kernel/prom_32.c | 6 +- > arch/sparc/kernel/setup_64.c | 6 + > arch/sparc/kernel/smp_64.c | 12 ++ > arch/sparc/mm/init_32.c | 2 +- > arch/sparc/mm/init_64.c | 11 ++ > arch/sparc/mm/srmmu.c | 18 ++- > arch/um/drivers/net_kern.c | 3 + > arch/um/drivers/vector_kern.c | 3 + > arch/um/kernel/initrd.c | 2 + > arch/um/kernel/mem.c | 16 ++ > arch/unicore32/kernel/setup.c | 4 + > arch/unicore32/mm/mmu.c | 15 +- > arch/x86/kernel/acpi/boot.c | 3 + > arch/x86/kernel/apic/io_apic.c | 5 + > arch/x86/kernel/e820.c | 5 +- > arch/x86/kernel/setup_percpu.c | 10 +- > arch/x86/mm/kasan_init_64.c | 14 +- > arch/x86/mm/numa.c | 12 +- > arch/x86/platform/olpc/olpc_dt.c | 3 + > arch/x86/xen/p2m.c | 11 +- > arch/xtensa/mm/kasan_init.c | 10 +- > arch/xtensa/mm/mmu.c | 3 + > drivers/clk/ti/clk.c | 3 + > drivers/firmware/memmap.c | 2 +- > drivers/macintosh/smu.c | 5 +- > drivers/of/fdt.c | 8 +- > drivers/of/of_reserved_mem.c | 7 +- > drivers/of/unittest.c | 8 +- > drivers/usb/early/xhci-dbc.c | 2 +- > drivers/xen/swiotlb-xen.c | 7 +- > include/linux/memblock.h | 59 +------ > init/main.c | 26 +++- > kernel/dma/swiotlb.c | 21 ++- > kernel/power/snapshot.c | 3 + > kernel/printk/printk.c | 9 +- > lib/cpumask.c | 3 + > mm/cma.c | 10 +- > mm/kasan/init.c | 10 +- > mm/memblock.c | 249 ++++++++++-------------------- > mm/page_alloc.c | 10 +- > mm/page_ext.c | 2 +- > mm/percpu.c | 84 +++++++--- > mm/sparse.c | 25 ++- > 121 files changed, 860 insertions(+), 412 deletions(-) > > -- > 2.7.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel