linux-snps-arc.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To: Vineet Gupta <Vineet.Gupta1@synopsys.com>, libc-alpha@sourceware.org
Cc: linux-snps-arc@lists.infradead.org
Subject: Re: [PATCH v6 11/13] ARC: Build Infrastructure
Date: Wed, 3 Jun 2020 16:58:32 -0300	[thread overview]
Message-ID: <fe061156-0870-086d-72b7-a006ec8421c7@linaro.org> (raw)
In-Reply-To: <20200423014126.10417-12-vgupta@synopsys.com>



On 22/04/2020 22:41, Vineet Gupta via Libc-alpha wrote:
> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

Some comments below.

> ---
>  config.h.in                                |   3 +
>  sysdeps/arc/Implies                        |   3 +
>  sysdeps/arc/Makefile                       |  21 +++
>  sysdeps/arc/Versions                       |   8 +
>  sysdeps/arc/configure                      | 182 +++++++++++++++++++++
>  sysdeps/arc/configure.ac                   |  26 +++
>  sysdeps/arc/nptl/Makefile                  |  22 +++
>  sysdeps/arc/preconfigure                   |  14 ++
>  sysdeps/unix/sysv/linux/arc/Implies        |   3 +
>  sysdeps/unix/sysv/linux/arc/Makefile       |  29 ++++
>  sysdeps/unix/sysv/linux/arc/Versions       |  16 ++
>  sysdeps/unix/sysv/linux/arc/configure      |   4 +
>  sysdeps/unix/sysv/linux/arc/configure.ac   |   4 +
>  sysdeps/unix/sysv/linux/arc/ldconfig.h     |  27 +++
>  sysdeps/unix/sysv/linux/arc/shlib-versions |   7 +
>  15 files changed, 369 insertions(+)
>  create mode 100644 sysdeps/arc/Implies
>  create mode 100644 sysdeps/arc/Makefile
>  create mode 100644 sysdeps/arc/Versions
>  create mode 100644 sysdeps/arc/configure
>  create mode 100644 sysdeps/arc/configure.ac
>  create mode 100644 sysdeps/arc/nptl/Makefile
>  create mode 100644 sysdeps/arc/preconfigure
>  create mode 100644 sysdeps/unix/sysv/linux/arc/Implies
>  create mode 100644 sysdeps/unix/sysv/linux/arc/Makefile
>  create mode 100644 sysdeps/unix/sysv/linux/arc/Versions
>  create mode 100644 sysdeps/unix/sysv/linux/arc/configure
>  create mode 100644 sysdeps/unix/sysv/linux/arc/configure.ac
>  create mode 100644 sysdeps/unix/sysv/linux/arc/ldconfig.h
>  create mode 100644 sysdeps/unix/sysv/linux/arc/shlib-versions
> 
> diff --git a/config.h.in b/config.h.in
> index dea43df438f6..08962dfed075 100644
> --- a/config.h.in
> +++ b/config.h.in
> @@ -109,6 +109,9 @@
>  /* AArch64 big endian ABI */
>  #undef HAVE_AARCH64_BE
>  
> +/* ARC big endian ABI */
> +#undef HAVE_ARC_BE
> +

Why do you need this define exactly? It is not used anywhere in the code
and for C code if is more straightforwar to use endian.h.

>  /* C-SKY ABI version.  */
>  #undef CSKYABI
>  
> diff --git a/sysdeps/arc/Implies b/sysdeps/arc/Implies
> new file mode 100644
> index 000000000000..780c4e246769
> --- /dev/null
> +++ b/sysdeps/arc/Implies
> @@ -0,0 +1,3 @@
> +wordsize-32
> +ieee754/flt-32
> +ieee754/dbl-64

Ok.

> diff --git a/sysdeps/arc/Makefile b/sysdeps/arc/Makefile
> new file mode 100644
> index 000000000000..56ac503bfe43
> --- /dev/null
> +++ b/sysdeps/arc/Makefile
> @@ -0,0 +1,21 @@
> +# ARC Makefile
> +# Copyright (C) 1993-2020 Free Software Foundation, Inc.
> +# This file is part of the GNU C Library.
> +
> +# The GNU C Library is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU Lesser General Public
> +# License as published by the Free Software Foundation; either
> +# version 2.1 of the License, or (at your option) any later version.
> +
> +# The GNU C Library is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> +# Lesser General Public License for more details.
> +
> +# You should have received a copy of the GNU Lesser General Public
> +# License along with the GNU C Library.  If not, see
> +# <https://www.gnu.org/licenses/>.
> +
> +# We don't support long doubles as a distinct type.  We don't need to set
> +# this variable; it's here mostly for documentational purposes.
> +long-double-fcts = no

Ok.

> diff --git a/sysdeps/arc/Versions b/sysdeps/arc/Versions
> new file mode 100644
> index 000000000000..6ac7b8e49505
> --- /dev/null
> +++ b/sysdeps/arc/Versions
> @@ -0,0 +1,8 @@
> +libc {
> +  GLIBC_2.32 {
> +    __mcount;
> +  }

Hum, does ARC require a different symbol name than the one provided
by gmon/Versions?

> +  GLIBC_PRIVATE {
> +    __syscall_error;
> +  }
> +}
> diff --git a/sysdeps/arc/configure b/sysdeps/arc/configure
> new file mode 100644
> index 000000000000..5820017d6505
> --- /dev/null
> +++ b/sysdeps/arc/configure
> @@ -0,0 +1,182 @@
> +# This file is generated from configure.ac by Autoconf.  DO NOT EDIT!
> + # Local configure fragment for sysdeps/arc.
> +
> +$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
> +
> +libc_cv_have_sdata_section=no
> +
> +# For ARC, historically ; was used for comments and not newline
> +# Later # also got added to comment list, but ; couldn't be switched to
> +# canonical newline as there's lots of code out there which will break
> +libc_cv_asm_line_sep='`'
> +cat >>confdefs.h <<_ACEOF
> +#define ASM_LINE_SEP $libc_cv_asm_line_sep
> +_ACEOF
> +
> +
> +# For big endian ABI, generate a symbol for selecting right dynamic linker
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
> +$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
> +if ${ac_cv_path_GREP+:} false; then :
> +  $as_echo_n "(cached) " >&6
> +else
> +  if test -z "$GREP"; then
> +  ac_path_GREP_found=false
> +  # Loop through the user's path and test for each of PROGNAME-LIST
> +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> +do
> +  IFS=$as_save_IFS
> +  test -z "$as_dir" && as_dir=.
> +    for ac_prog in grep ggrep; do
> +    for ac_exec_ext in '' $ac_executable_extensions; do
> +      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
> +      as_fn_executable_p "$ac_path_GREP" || continue
> +# Check for GNU ac_path_GREP and select it if it is found.
> +  # Check for GNU $ac_path_GREP
> +case `"$ac_path_GREP" --version 2>&1` in
> +*GNU*)
> +  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
> +*)
> +  ac_count=0
> +  $as_echo_n 0123456789 >"conftest.in"
> +  while :
> +  do
> +    cat "conftest.in" "conftest.in" >"conftest.tmp"
> +    mv "conftest.tmp" "conftest.in"
> +    cp "conftest.in" "conftest.nl"
> +    $as_echo 'GREP' >> "conftest.nl"
> +    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> +    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> +    as_fn_arith $ac_count + 1 && ac_count=$as_val
> +    if test $ac_count -gt ${ac_path_GREP_max-0}; then
> +      # Best one so far, save it but keep looking for a better one
> +      ac_cv_path_GREP="$ac_path_GREP"
> +      ac_path_GREP_max=$ac_count
> +    fi
> +    # 10*(2^10) chars as input seems more than enough
> +    test $ac_count -gt 10 && break
> +  done
> +  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> +esac
> +
> +      $ac_path_GREP_found && break 3
> +    done
> +  done
> +  done
> +IFS=$as_save_IFS
> +  if test -z "$ac_cv_path_GREP"; then
> +    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> +  fi
> +else
> +  ac_cv_path_GREP=$GREP
> +fi
> +
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
> +$as_echo "$ac_cv_path_GREP" >&6; }
> + GREP="$ac_cv_path_GREP"
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
> +$as_echo_n "checking for egrep... " >&6; }
> +if ${ac_cv_path_EGREP+:} false; then :
> +  $as_echo_n "(cached) " >&6
> +else
> +  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
> +   then ac_cv_path_EGREP="$GREP -E"
> +   else
> +     if test -z "$EGREP"; then
> +  ac_path_EGREP_found=false
> +  # Loop through the user's path and test for each of PROGNAME-LIST
> +  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> +do
> +  IFS=$as_save_IFS
> +  test -z "$as_dir" && as_dir=.
> +    for ac_prog in egrep; do
> +    for ac_exec_ext in '' $ac_executable_extensions; do
> +      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
> +      as_fn_executable_p "$ac_path_EGREP" || continue
> +# Check for GNU ac_path_EGREP and select it if it is found.
> +  # Check for GNU $ac_path_EGREP
> +case `"$ac_path_EGREP" --version 2>&1` in
> +*GNU*)
> +  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
> +*)
> +  ac_count=0
> +  $as_echo_n 0123456789 >"conftest.in"
> +  while :
> +  do
> +    cat "conftest.in" "conftest.in" >"conftest.tmp"
> +    mv "conftest.tmp" "conftest.in"
> +    cp "conftest.in" "conftest.nl"
> +    $as_echo 'EGREP' >> "conftest.nl"
> +    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> +    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> +    as_fn_arith $ac_count + 1 && ac_count=$as_val
> +    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
> +      # Best one so far, save it but keep looking for a better one
> +      ac_cv_path_EGREP="$ac_path_EGREP"
> +      ac_path_EGREP_max=$ac_count
> +    fi
> +    # 10*(2^10) chars as input seems more than enough
> +    test $ac_count -gt 10 && break
> +  done
> +  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> +esac
> +
> +      $ac_path_EGREP_found && break 3
> +    done
> +  done
> +  done
> +IFS=$as_save_IFS
> +  if test -z "$ac_cv_path_EGREP"; then
> +    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> +  fi
> +else
> +  ac_cv_path_EGREP=$EGREP
> +fi
> +
> +   fi
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
> +$as_echo "$ac_cv_path_EGREP" >&6; }
> + EGREP="$ac_cv_path_EGREP"
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for big endian" >&5
> +$as_echo_n "checking for big endian... " >&6; }
> +if ${libc_cv_arc_be+:} false; then :
> +  $as_echo_n "(cached) " >&6
> +else
> +  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> +/* end confdefs.h.  */
> +#ifdef __BIG_ENDIAN__
> +                      yes
> +                     #endif
> +
> +_ACEOF
> +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
> +  $EGREP "yes" >/dev/null 2>&1; then :
> +  libc_cv_arc_be=yes
> +else
> +  libc_cv_arc_be=no
> +fi
> +rm -f conftest*
> +
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libc_cv_arc_be" >&5
> +$as_echo "$libc_cv_arc_be" >&6; }
> +if test $libc_cv_arc_be = yes; then
> +  # For shlib-versions.
> +  $as_echo "#define HAVE_ARC_BE 1" >>confdefs.h
> +
> +  config_vars="$config_vars
> +default-abi = ilp32_be"
> +else
> +  config_vars="$config_vars
> +default-abi = ilp32"
> +fi
> diff --git a/sysdeps/arc/configure.ac b/sysdeps/arc/configure.ac
> new file mode 100644
> index 000000000000..d5bcd2a58cdc
> --- /dev/null
> +++ b/sysdeps/arc/configure.ac
> @@ -0,0 +1,26 @@
> +GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> +# Local configure fragment for sysdeps/arc.
> +
> +AC_DEFINE(PI_STATIC_AND_HIDDEN)
> +libc_cv_have_sdata_section=no

The libc_cv_have_sdata_section is done by configure.ac, why do you need
to explicit set it here?

> +
> +# For ARC, historically ; was used for comments and not newline
> +# Later # also got added to comment list, but ; couldn't be switched to
> +# canonical newline as there's lots of code out there which will break
> +libc_cv_asm_line_sep='`'
> +AC_DEFINE_UNQUOTED(ASM_LINE_SEP, $libc_cv_asm_line_sep)
> +

Ok.

> +# For big endian ABI, generate a symbol for selecting right dynamic linker
> +AC_CACHE_CHECK([for big endian],
> +  [libc_cv_arc_be],
> +  [AC_EGREP_CPP(yes,[#ifdef __BIG_ENDIAN__
> +                      yes
> +                     #endif
> +  ], libc_cv_arc_be=yes, libc_cv_arc_be=no)])
> +if test $libc_cv_arc_be = yes; then
> +  # For shlib-versions.
> +  AC_DEFINE(HAVE_ARC_BE)
> +  LIBC_CONFIG_VAR([default-abi], [ilp32_be])
> +else
> +  LIBC_CONFIG_VAR([default-abi], [ilp32])
> +fi

The ilp32 naming is usually set for ILP32 architectures that uses 
64-bit registers type on 32 bit VMA (for instance mips64n32, x32,
or aarch64_ilp32).  I don't think this is the case for ARC, so I think
this naming might be confusing.

> diff --git a/sysdeps/arc/nptl/Makefile b/sysdeps/arc/nptl/Makefile
> new file mode 100644
> index 000000000000..6f387c53905d
> --- /dev/null
> +++ b/sysdeps/arc/nptl/Makefile
> @@ -0,0 +1,22 @@
> +# NPTL makefile fragment for ARC.
> +# Copyright (C) 2005-2020 Free Software Foundation, Inc.
> +#
> +# This file is part of the GNU C Library.
> +#
> +# The GNU C Library is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU Lesser General Public
> +# License as published by the Free Software Foundation; either
> +# version 2.1 of the License, or (at your option) any later version.
> +#
> +# The GNU C Library is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> +# Lesser General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public
> +# License along with the GNU C Library.  If not, see
> +# <https://www.gnu.org/licenses/>.
> +
> +ifeq ($(subdir),csu)
> +gen-as-const-headers += tcb-offsets.sym
> +endif

Ok.

> diff --git a/sysdeps/arc/preconfigure b/sysdeps/arc/preconfigure
> new file mode 100644
> index 000000000000..a79db0239ae6
> --- /dev/null
> +++ b/sysdeps/arc/preconfigure
> @@ -0,0 +1,14 @@
> +case "$machine" in
> +arc*)
> +  base_machine=arc
> +  machine=arc
> +
> +  gccfloat=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | grep __ARC_FPU_| wc -l`
> +  if test "$gccfloat" != "0"; then
> +    with_fp_cond=1
> +  else
> +    with_fp_cond=0
> +  fi
> +  ;;
> +
> +esac

Ok.

> diff --git a/sysdeps/unix/sysv/linux/arc/Implies b/sysdeps/unix/sysv/linux/arc/Implies
> new file mode 100644
> index 000000000000..7f739a0340b6
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/Implies
> @@ -0,0 +1,3 @@
> +arc/nptl
> +unix/sysv/linux/generic/wordsize-32
> +unix/sysv/linux/generic

Ok.

> diff --git a/sysdeps/unix/sysv/linux/arc/Makefile b/sysdeps/unix/sysv/linux/arc/Makefile
> new file mode 100644
> index 000000000000..7958625f6d5c
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/Makefile
> @@ -0,0 +1,29 @@
> +ifeq ($(subdir),stdlib)
> +gen-as-const-headers += ucontext_i.sym
> +endif
> +
> +ifeq ($(subdir),signal)
> +sysdep_routines += sigrestorer
> +endif
> +
> +ifeq ($(subdir),misc)
> +# MIPS/Tile-style cacheflush routine
> +sysdep_headers += sys/cachectl.h
> +sysdep_routines += cacheflush
> +endif
> +
> +ifeq ($(subdir),elf)
> +ifeq ($(build-shared),yes)
> +# This is needed for DSO loading from static binaries.
> +sysdep-dl-routines += dl-static
> +endif
> +endif
> +
> +abi-variants := ilp32 ilp32_be
> +
> +ifeq (,$(filter $(default-abi),$(abi-variants)))
> +$(error Unknown ABI $(default-abi), must be one of $(abi-variants))
> +endif
> +
> +abi-ilp32-condition	:= !defined __BIG_ENDIAN__
> +abi-ilp32_be-condition	:= defined __BIG_ENDIAN__

Ok with the 'ilp32' naming module described above.

> diff --git a/sysdeps/unix/sysv/linux/arc/Versions b/sysdeps/unix/sysv/linux/arc/Versions
> new file mode 100644
> index 000000000000..292f1974b02a
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/Versions
> @@ -0,0 +1,16 @@
> +ld {
> +  GLIBC_PRIVATE {
> +    # used for loading by static libraries
> +    _dl_var_init;
> +  }
> +}
> +libc {
> +  GLIBC_2.32 {
> +    _flush_cache;
> +    cacheflush;
> +  }
> +  GLIBC_PRIVATE {
> +    # A copy of sigaction lives in libpthread, and needs these.
> +    __default_rt_sa_restorer;
> +  }
> +}

Afaik all other ABIs that requires the sa_restores uses a local symbol in
libpthread. I don't have a strong preference here.

> diff --git a/sysdeps/unix/sysv/linux/arc/configure b/sysdeps/unix/sysv/linux/arc/configure
> new file mode 100644
> index 000000000000..56ec14357507
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/configure
> @@ -0,0 +1,4 @@
> +# This file is generated from configure.in by Autoconf.  DO NOT EDIT!
> + # Local configure fragment for sysdeps/unix/sysv/linux/arc.
> +
> +arch_minimum_kernel=5.1.0
> diff --git a/sysdeps/unix/sysv/linux/arc/configure.ac b/sysdeps/unix/sysv/linux/arc/configure.ac
> new file mode 100644
> index 000000000000..8af5a12cc248
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/configure.ac
> @@ -0,0 +1,4 @@
> +GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> +# Local configure fragment for sysdeps/unix/sysv/linux/arc.
> +
> +arch_minimum_kernel=5.1.0

OK.

> diff --git a/sysdeps/unix/sysv/linux/arc/ldconfig.h b/sysdeps/unix/sysv/linux/arc/ldconfig.h
> new file mode 100644
> index 000000000000..4896ec005c8e
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/ldconfig.h
> @@ -0,0 +1,27 @@
> +/* ldconfig default paths and libraries.  Linux/RISC-V version.
> +   Copyright (C) 2001-2020 Free Software Foundation, Inc.
> +   This file is part of the GNU C Library.
> +
> +   The GNU C Library is free software; you can redistribute it and/or
> +   modify it under the terms of the GNU Lesser General Public
> +   License as published by the Free Software Foundation; either
> +   version 2.1 of the License, or (at your option) any later version.
> +
> +   The GNU C Library is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> +   Lesser General Public License for more details.
> +
> +   You should have received a copy of the GNU Lesser General Public
> +   License along with the GNU C Library.  If not, see
> +   <https://www.gnu.org/licenses/>.  */
> +
> +#include <sysdeps/generic/ldconfig.h>
> +
> +#define SYSDEP_KNOWN_INTERPRETER_NAMES 		\
> +  { "/lib/ld-linux-arc.so.2", FLAG_ELF_LIBC6 },	\
> +  { "/lib/ld-linux-arceb.so.2", FLAG_ELF_LIBC6 },
> +
> +#define SYSDEP_KNOWN_LIBRARY_NAMES 	\
> +  { "libc.so.6", FLAG_ELF_LIBC6 },	\
> +  { "libm.so.6", FLAG_ELF_LIBC6 },

Ok.

> diff --git a/sysdeps/unix/sysv/linux/arc/shlib-versions b/sysdeps/unix/sysv/linux/arc/shlib-versions
> new file mode 100644
> index 000000000000..343c0a04500e
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/arc/shlib-versions
> @@ -0,0 +1,7 @@
> +DEFAULT                 GLIBC_2.32
> +
> +%ifdef HAVE_ARC_BE
> +ld=ld-linux-arceb.so.2
> +%else
> +ld=ld-linux-arc.so.2
> +%endif
> 

Ok.

_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc

  reply	other threads:[~2020-06-03 19:58 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-23  1:41 [PATCH v6 00/13] glibc port to ARC processors Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 01/13] ARC: ABI Implementation Vineet Gupta
     [not found]   ` <88508d10-2d29-026a-bb54-ad607154ab87@linaro.org>
2020-05-27 22:15     ` Vineet Gupta
2020-05-29 13:56       ` Adhemerval Zanella
     [not found]     ` <a56a35d4-3e9e-9a88-4be5-8553d5f11ad3@synopsys.com>
     [not found]       ` <87mu5jxkv7.fsf@oldenburg2.str.redhat.com>
2020-06-04 19:01         ` Vineet Gupta
2020-06-04 23:56           ` Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 02/13] ARC: startup and dynamic linking code Vineet Gupta
     [not found]   ` <17957ee6-2bc1-f43b-f184-f0703ba2765f@linaro.org>
2020-05-28  1:14     ` Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 03/13] ARC: Thread Local Storage support Vineet Gupta
     [not found]   ` <4f7a67fb-6f96-57e6-b827-d1ab5dd6733f@linaro.org>
2020-05-28  1:36     ` Vineet Gupta
2020-06-01 18:53       ` Adhemerval Zanella
2020-04-23  1:41 ` [PATCH v6 04/13] ARC: Atomics and Locking primitives Vineet Gupta
     [not found]   ` <03f4a9b3-b1ca-90fa-0b6a-609a3135267d@linaro.org>
2020-04-24  7:23     ` Vineet Gupta
     [not found]     ` <20200427215938.14136-1-vgupta@synopsys.com>
2020-04-27 22:13       ` [PATCH] semaphore: consolidate arch headers into a generic one Vineet Gupta
     [not found]       ` <ac93c301-36d3-b20a-d31c-50c1f3264c68@linaro.org>
2020-05-05 22:59         ` Vineet Gupta
2020-05-08 13:32           ` Adhemerval Zanella
2020-04-23  1:41 ` [PATCH v6 05/13] ARC: math soft float support Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 06/13] ARC: hardware floating point support Vineet Gupta
2020-05-29 14:12   ` Adhemerval Zanella
2020-05-29 22:28     ` Vineet Gupta
2020-05-29 23:50       ` Vineet Gupta
2020-06-02 17:51         ` Joseph Myers
     [not found]         ` <07887c48-7e07-9f89-035d-3f336a16f2da@synopsys.com>
2020-06-02 18:13           ` static inline math functions (was Re: [PATCH v6 06/13] ARC: hardware floating point support) Joseph Myers
2020-06-02 18:35             ` Adhemerval Zanella
2020-06-05  4:44         ` [PATCH v6 06/13] ARC: hardware floating point support Vineet Gupta
2020-06-05 17:22           ` Adhemerval Zanella
2020-06-02 17:48       ` Joseph Myers
2020-04-23  1:41 ` [PATCH v6 07/13] ARC: Linux Syscall Interface Vineet Gupta
2020-05-29 16:49   ` Adhemerval Zanella
2020-05-30  2:02     ` Vineet Gupta
2020-06-03 19:46     ` Vineet Gupta
2020-06-03 20:04       ` Adhemerval Zanella
2020-06-03 20:17         ` Vineet Gupta
2020-06-04 11:06           ` Adhemerval Zanella
2020-04-23  1:41 ` [PATCH v6 08/13] ARC: Linux ABI Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 09/13] ARC: Linux Startup and Dynamic Loading Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 10/13] ARC: ABI lists Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 11/13] ARC: Build Infrastructure Vineet Gupta
2020-06-03 19:58   ` Adhemerval Zanella [this message]
2020-06-04 15:25     ` Vineet Gupta
2020-06-04 17:05       ` Adhemerval Zanella
2020-06-08  4:18         ` Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 12/13] build-many-glibcs.py: Enable ARC builds Vineet Gupta
2020-04-23  1:41 ` [PATCH v6 13/13] Documentation for ARC port Vineet Gupta
2020-05-04 21:21 ` [PATCH v6 00/13] glibc port to ARC processors Vineet Gupta
2020-05-15  0:45   ` Vineet Gupta
2020-05-27  1:49     ` Vineet Gupta
     [not found]       ` <d7f1176c-87c6-90c6-161c-4705a47837ea@linaro.org>
2020-05-27 18:38         ` Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fe061156-0870-086d-72b7-a006ec8421c7@linaro.org \
    --to=adhemerval.zanella@linaro.org \
    --cc=Vineet.Gupta1@synopsys.com \
    --cc=libc-alpha@sourceware.org \
    --cc=linux-snps-arc@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).