From mboxrd@z Thu Jan 1 00:00:00 1970 From: Cyril Chemparathy Subject: [PATCH v7 06/12] regulator: add driver for tps6524x regulator Date: Tue, 7 Dec 2010 09:51:56 -0500 Message-ID: <1291733522-3626-7-git-send-email-cyril@ti.com> References: <1291733522-3626-1-git-send-email-cyril@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, khilman-1D3HCaltpLuhEniVeURVKkEOCMrvLtNR@public.gmane.org, Cyril Chemparathy , akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org, alan-qBU/x9rampVanCEyBjwyrvXRex20P6io@public.gmane.org To: davinci-linux-open-source-VycZQUHpC/PFrsHnngEfi1aTQe2KTcn/@public.gmane.org, spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, lrg-kDsPt+C1G03kYMGBc/C6ZA@public.gmane.org, broonie-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org, rpurdie@rpsys Return-path: In-Reply-To: <1291733522-3626-1-git-send-email-cyril-l0cyMroinI0@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-spi.vger.kernel.org TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using SPI. Acked-by: Mark Brown Signed-off-by: Cyril Chemparathy --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/tps6524x-regulator.c | 692 ++++++++++++++++++++++++++++++++ 3 files changed, 703 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/tps6524x-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index dd30e88..da34981 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -250,5 +250,15 @@ config REGULATOR_TPS6586X help This driver supports TPS6586X voltage regulator chips. +config REGULATOR_TPS6524X + tristate "TI TPS6524X Power regulators" + depends on SPI + help + This driver supports TPS6524X voltage regulator chips. TPS6524X + provides three step-down converters and two general-purpose LDO + voltage regulators. This device is interfaced using a customized + serial interface currently supported on the sequencer serial + port controller. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index bff8157..cf71df7 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o +obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o diff --git a/drivers/regulator/tps6524x-regulator.c b/drivers/regulator/tps6524x-regulator.c new file mode 100644 index 0000000..dea1260 --- /dev/null +++ b/drivers/regulator/tps6524x-regulator.c @@ -0,0 +1,692 @@ +/* + * Regulator driver for TPS6524x PMIC + * + * Copyright (C) 2010 Texas Instruments + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_LDO_SET 0x0 +#define LDO_ILIM_MASK 1 /* 0 = 400-800, 1 = 900-1500 */ +#define LDO_VSEL_MASK 0x0f +#define LDO2_ILIM_SHIFT 12 +#define LDO2_VSEL_SHIFT 4 +#define LDO1_ILIM_SHIFT 8 +#define LDO1_VSEL_SHIFT 0 + +#define REG_BLOCK_EN 0x1 +#define BLOCK_MASK 1 +#define BLOCK_LDO1_SHIFT 0 +#define BLOCK_LDO2_SHIFT 1 +#define BLOCK_LCD_SHIFT 2 +#define BLOCK_USB_SHIFT 3 + +#define REG_DCDC_SET 0x2 +#define DCDC_VDCDC_MASK 0x1f +#define DCDC_VDCDC1_SHIFT 0 +#define DCDC_VDCDC2_SHIFT 5 +#define DCDC_VDCDC3_SHIFT 10 + +#define REG_DCDC_EN 0x3 +#define DCDCDCDC_EN_MASK 0x1 +#define DCDCDCDC1_EN_SHIFT 0 +#define DCDCDCDC1_PG_MSK BIT(1) +#define DCDCDCDC2_EN_SHIFT 2 +#define DCDCDCDC2_PG_MSK BIT(3) +#define DCDCDCDC3_EN_SHIFT 4 +#define DCDCDCDC3_PG_MSK BIT(5) + +#define REG_USB 0x4 +#define USB_ILIM_SHIFT 0 +#define USB_ILIM_MASK 0x3 +#define USB_TSD_SHIFT 2 +#define USB_TSD_MASK 0x3 +#define USB_TWARN_SHIFT 4 +#define USB_TWARN_MASK 0x3 +#define USB_IWARN_SD BIT(6) +#define USB_FAST_LOOP BIT(7) + +#define REG_ALARM 0x5 +#define ALARM_LDO1 BIT(0) +#define ALARM_DCDC1 BIT(1) +#define ALARM_DCDC2 BIT(2) +#define ALARM_DCDC3 BIT(3) +#define ALARM_LDO2 BIT(4) +#define ALARM_USB_WARN BIT(5) +#define ALARM_USB_ALARM BIT(6) +#define ALARM_LCD BIT(9) +#define ALARM_TEMP_WARM BIT(10) +#define ALARM_TEMP_HOT BIT(11) +#define ALARM_NRST BIT(14) +#define ALARM_POWERUP BIT(15) + +#define REG_INT_ENABLE 0x6 +#define INT_LDO1 BIT(0) +#define INT_DCDC1 BIT(1) +#define INT_DCDC2 BIT(2) +#define INT_DCDC3 BIT(3) +#define INT_LDO2 BIT(4) +#define INT_USB_WARN BIT(5) +#define INT_USB_ALARM BIT(6) +#define INT_LCD BIT(9) +#define INT_TEMP_WARM BIT(10) +#define INT_TEMP_HOT BIT(11) +#define INT_GLOBAL_EN BIT(15) + +#define REG_INT_STATUS 0x7 +#define STATUS_LDO1 BIT(0) +#define STATUS_DCDC1 BIT(1) +#define STATUS_DCDC2 BIT(2) +#define STATUS_DCDC3 BIT(3) +#define STATUS_LDO2 BIT(4) +#define STATUS_USB_WARN BIT(5) +#define STATUS_USB_ALARM BIT(6) +#define STATUS_LCD BIT(9) +#define STATUS_TEMP_WARM BIT(10) +#define STATUS_TEMP_HOT BIT(11) + +#define REG_SOFTWARE_RESET 0xb +#define REG_WRITE_ENABLE 0xd +#define REG_REV_ID 0xf + +#define N_DCDC 3 +#define N_LDO 2 +#define N_SWITCH 2 +#define N_REGULATORS (3 /* DCDC */ + \ + 2 /* LDO */ + \ + 2 /* switch */) + +#define FIXED_ILIMSEL BIT(0) +#define FIXED_VOLTAGE BIT(1) + +#define CMD_READ(reg) ((reg) << 6) +#define CMD_WRITE(reg) (BIT(5) | (reg) << 6) +#define STAT_CLK BIT(3) +#define STAT_WRITE BIT(2) +#define STAT_INVALID BIT(1) +#define STAT_WP BIT(0) + +struct field { + int reg; + int shift; + int mask; +}; + +struct supply_info { + const char *name; + int n_voltages; + const int *voltages; + int fixed_voltage; + int n_ilimsels; + const int *ilimsels; + int fixed_ilimsel; + int flags; + struct field enable, voltage, ilimsel; +}; + +struct tps6524x { + struct device *dev; + struct spi_device *spi; + struct mutex lock; + struct regulator_desc desc[N_REGULATORS]; + struct regulator_dev *rdev[N_REGULATORS]; +}; + +static int __read_reg(struct tps6524x *hw, int reg) +{ + int error = 0; + u16 cmd = CMD_READ(reg), in; + u8 status; + struct spi_message m; + struct spi_transfer t[3]; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 2; + t[0].bits_per_word = 12; + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = ∈ + t[1].len = 2; + t[1].bits_per_word = 16; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = &status; + t[2].len = 1; + t[2].bits_per_word = 4; + spi_message_add_tail(&t[2], &m); + + error = spi_sync(hw->spi, &m); + if (error < 0) + return error; + + dev_dbg(hw->dev, "read reg %d, data %x, status %x\n", + reg, in, status); + + if (!(status & STAT_CLK) || (status & STAT_WRITE)) + return -EIO; + + if (status & STAT_INVALID) + return -EINVAL; + + return in; +} + +static int read_reg(struct tps6524x *hw, int reg) +{ + int ret; + + mutex_lock(&hw->lock); + ret = __read_reg(hw, reg); + mutex_unlock(&hw->lock); + + return ret; +} + +static int __write_reg(struct tps6524x *hw, int reg, int val) +{ + int error = 0; + u16 cmd = CMD_WRITE(reg), out = val; + u8 status; + struct spi_message m; + struct spi_transfer t[3]; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = &cmd; + t[0].len = 2; + t[0].bits_per_word = 12; + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = &out; + t[1].len = 2; + t[1].bits_per_word = 16; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = &status; + t[2].len = 1; + t[2].bits_per_word = 4; + spi_message_add_tail(&t[2], &m); + + error = spi_sync(hw->spi, &m); + if (error < 0) + return error; + + dev_dbg(hw->dev, "wrote reg %d, data %x, status %x\n", + reg, out, status); + + if (!(status & STAT_CLK) || !(status & STAT_WRITE)) + return -EIO; + + if (status & (STAT_INVALID | STAT_WP)) + return -EINVAL; + + return error; +} + +static int __rmw_reg(struct tps6524x *hw, int reg, int mask, int val) +{ + int ret; + + ret = __read_reg(hw, reg); + if (ret < 0) + return ret; + + ret &= ~mask; + ret |= val; + + ret = __write_reg(hw, reg, ret); + + return (ret < 0) ? ret : 0; +} + +static int rmw_protect(struct tps6524x *hw, int reg, int mask, int val) +{ + int ret; + + mutex_lock(&hw->lock); + + ret = __write_reg(hw, REG_WRITE_ENABLE, 1); + if (ret) { + dev_err(hw->dev, "failed to set write enable\n"); + goto error; + } + + ret = __rmw_reg(hw, reg, mask, val); + if (ret) + dev_err(hw->dev, "failed to rmw register %d\n", reg); + + ret = __write_reg(hw, REG_WRITE_ENABLE, 0); + if (ret) { + dev_err(hw->dev, "failed to clear write enable\n"); + goto error; + } + +error: + mutex_unlock(&hw->lock); + + return ret; +} + +static int read_field(struct tps6524x *hw, const struct field *field) +{ + int tmp; + + tmp = read_reg(hw, field->reg); + if (tmp < 0) + return tmp; + + return (tmp >> field->shift) & field->mask; +} + +static int write_field(struct tps6524x *hw, const struct field *field, + int val) +{ + if (val & ~field->mask) + return -EOVERFLOW; + + return rmw_protect(hw, field->reg, + field->mask << field->shift, + val << field->shift); +} + +static const int dcdc1_voltages[] = { + 800000, 825000, 850000, 875000, + 900000, 925000, 950000, 975000, + 1000000, 1025000, 1050000, 1075000, + 1100000, 1125000, 1150000, 1175000, + 1200000, 1225000, 1250000, 1275000, + 1300000, 1325000, 1350000, 1375000, + 1400000, 1425000, 1450000, 1475000, + 1500000, 1525000, 1550000, 1575000, +}; + +static const int dcdc2_voltages[] = { + 1400000, 1450000, 1500000, 1550000, + 1600000, 1650000, 1700000, 1750000, + 1800000, 1850000, 1900000, 1950000, + 2000000, 2050000, 2100000, 2150000, + 2200000, 2250000, 2300000, 2350000, + 2400000, 2450000, 2500000, 2550000, + 2600000, 2650000, 2700000, 2750000, + 2800000, 2850000, 2900000, 2950000, +}; + +static const int dcdc3_voltages[] = { + 2400000, 2450000, 2500000, 2550000, 2600000, + 2650000, 2700000, 2750000, 2800000, 2850000, + 2900000, 2950000, 3000000, 3050000, 3100000, + 3150000, 3200000, 3250000, 3300000, 3350000, + 3400000, 3450000, 3500000, 3550000, 3600000, +}; + +static const int ldo1_voltages[] = { + 4300000, 4350000, 4400000, 4450000, + 4500000, 4550000, 4600000, 4650000, + 4700000, 4750000, 4800000, 4850000, + 4900000, 4950000, 5000000, 5050000, +}; + +static const int ldo2_voltages[] = { + 1100000, 1150000, 1200000, 1250000, + 1300000, 1700000, 1750000, 1800000, + 1850000, 1900000, 3150000, 3200000, + 3250000, 3300000, 3350000, 3400000, +}; + +static const int ldo_ilimsel[] = { + 400000, 1500000 +}; + +static const int usb_ilimsel[] = { + 200000, 400000, 800000, 1000000 +}; + +#define __MK_FIELD(_reg, _mask, _shift) \ + { .reg = (_reg), .mask = (_mask), .shift = (_shift), } + +static const struct supply_info supply_info[N_REGULATORS] = { + { + .name = "DCDC1", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc1_voltages), + .voltages = dcdc1_voltages, + .fixed_ilimsel = 2400000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC1_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC1_SHIFT), + }, + { + .name = "DCDC2", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc2_voltages), + .voltages = dcdc2_voltages, + .fixed_ilimsel = 1200000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC2_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC2_SHIFT), + }, + { + .name = "DCDC3", + .flags = FIXED_ILIMSEL, + .n_voltages = ARRAY_SIZE(dcdc3_voltages), + .voltages = dcdc3_voltages, + .fixed_ilimsel = 1200000, + .enable = __MK_FIELD(REG_DCDC_EN, DCDCDCDC_EN_MASK, + DCDCDCDC3_EN_SHIFT), + .voltage = __MK_FIELD(REG_DCDC_SET, DCDC_VDCDC_MASK, + DCDC_VDCDC3_SHIFT), + }, + { + .name = "LDO1", + .n_voltages = ARRAY_SIZE(ldo1_voltages), + .voltages = ldo1_voltages, + .n_ilimsels = ARRAY_SIZE(ldo_ilimsel), + .ilimsels = ldo_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LDO1_SHIFT), + .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK, + LDO1_VSEL_SHIFT), + .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK, + LDO1_ILIM_SHIFT), + }, + { + .name = "LDO2", + .n_voltages = ARRAY_SIZE(ldo2_voltages), + .voltages = ldo2_voltages, + .n_ilimsels = ARRAY_SIZE(ldo_ilimsel), + .ilimsels = ldo_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LDO2_SHIFT), + .voltage = __MK_FIELD(REG_LDO_SET, LDO_VSEL_MASK, + LDO2_VSEL_SHIFT), + .ilimsel = __MK_FIELD(REG_LDO_SET, LDO_ILIM_MASK, + LDO2_ILIM_SHIFT), + }, + { + .name = "USB", + .flags = FIXED_VOLTAGE, + .fixed_voltage = 5000000, + .n_ilimsels = ARRAY_SIZE(usb_ilimsel), + .ilimsels = usb_ilimsel, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_USB_SHIFT), + .ilimsel = __MK_FIELD(REG_USB, USB_ILIM_MASK, + USB_ILIM_SHIFT), + }, + { + .name = "LCD", + .flags = FIXED_VOLTAGE | FIXED_ILIMSEL, + .fixed_voltage = 5000000, + .fixed_ilimsel = 400000, + .enable = __MK_FIELD(REG_BLOCK_EN, BLOCK_MASK, + BLOCK_LCD_SHIFT), + }, +}; + +static int list_voltage(struct regulator_dev *rdev, unsigned selector) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return selector ? -EINVAL : info->fixed_voltage; + + if (selector < 0 || selector >= info->n_voltages) + return -EINVAL; + + return info->voltages[selector]; +} + +static int set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV) +{ + const struct supply_info *info; + struct tps6524x *hw; + int i; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return -EINVAL; + + for (i = 0; i < info->n_voltages; i++) + if (min_uV <= info->voltages[i] && + max_uV >= info->voltages[i]) + break; + + if (i >= info->n_voltages) + return -EINVAL; + + return write_field(hw, &info->voltage, i); +} + +static int get_voltage(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + int ret; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_VOLTAGE) + return info->fixed_voltage; + + ret = read_field(hw, &info->voltage); + if (ret < 0) + return ret; + if (WARN_ON(ret >= info->n_voltages)) + return -EIO; + + return info->voltages[ret]; +} + +static int set_current_limit(struct regulator_dev *rdev, int min_uA, + int max_uA) +{ + const struct supply_info *info; + struct tps6524x *hw; + int i; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_ILIMSEL) + return -EINVAL; + + for (i = 0; i < info->n_ilimsels; i++) + if (min_uA <= info->ilimsels[i] && + max_uA >= info->ilimsels[i]) + break; + + if (i >= info->n_ilimsels) + return -EINVAL; + + return write_field(hw, &info->ilimsel, i); +} + +static int get_current_limit(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + int ret; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + if (info->flags & FIXED_ILIMSEL) + return info->fixed_ilimsel; + + ret = read_field(hw, &info->ilimsel); + if (ret < 0) + return ret; + if (WARN_ON(ret >= info->n_ilimsels)) + return -EIO; + + return info->ilimsels[ret]; +} + +static int enable_supply(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return write_field(hw, &info->enable, 1); +} + +static int disable_supply(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return write_field(hw, &info->enable, 0); +} + +static int is_supply_enabled(struct regulator_dev *rdev) +{ + const struct supply_info *info; + struct tps6524x *hw; + + hw = rdev_get_drvdata(rdev); + info = &supply_info[rdev_get_id(rdev)]; + + return read_field(hw, &info->enable); +} + +static struct regulator_ops regulator_ops = { + .is_enabled = is_supply_enabled, + .enable = enable_supply, + .disable = disable_supply, + .get_voltage = get_voltage, + .set_voltage = set_voltage, + .list_voltage = list_voltage, + .set_current_limit = set_current_limit, + .get_current_limit = get_current_limit, +}; + +static int __devexit pmic_remove(struct spi_device *spi) +{ + struct tps6524x *hw = spi_get_drvdata(spi); + int i; + + if (!hw) + return 0; + for (i = 0; i < N_REGULATORS; i++) { + if (hw->rdev[i]) + regulator_unregister(hw->rdev[i]); + hw->rdev[i] = NULL; + } + spi_set_drvdata(spi, NULL); + kfree(hw); + return 0; +} + +static int __devinit pmic_probe(struct spi_device *spi) +{ + struct tps6524x *hw; + struct device *dev = &spi->dev; + const struct supply_info *info = supply_info; + struct regulator_init_data *init_data; + int ret = 0, i; + + init_data = dev->platform_data; + if (!init_data) { + dev_err(dev, "could not find regulator platform data\n"); + return -EINVAL; + } + + hw = kzalloc(sizeof(struct tps6524x), GFP_KERNEL); + if (!hw) { + dev_err(dev, "cannot allocate regulator private data\n"); + return -ENOMEM; + } + spi_set_drvdata(spi, hw); + + memset(hw, 0, sizeof(struct tps6524x)); + hw->dev = dev; + hw->spi = spi_dev_get(spi); + mutex_init(&hw->lock); + + for (i = 0; i < N_REGULATORS; i++, info++, init_data++) { + hw->desc[i].name = info->name; + hw->desc[i].id = i; + hw->desc[i].n_voltages = info->n_voltages; + hw->desc[i].ops = ®ulator_ops; + hw->desc[i].type = REGULATOR_VOLTAGE; + hw->desc[i].owner = THIS_MODULE; + + if (info->flags & FIXED_VOLTAGE) + hw->desc[i].n_voltages = 1; + + hw->rdev[i] = regulator_register(&hw->desc[i], dev, + init_data, hw); + if (IS_ERR(hw->rdev[i])) { + ret = PTR_ERR(hw->rdev[i]); + hw->rdev[i] = NULL; + goto fail; + } + } + + return 0; + +fail: + pmic_remove(spi); + return ret; +} + +static struct spi_driver pmic_driver = { + .probe = pmic_probe, + .remove = __devexit_p(pmic_remove), + .driver = { + .name = "tps6524x", + .owner = THIS_MODULE, + }, +}; + +static int __init pmic_driver_init(void) +{ + return spi_register_driver(&pmic_driver); +} +module_init(pmic_driver_init); + +static void __exit pmic_driver_exit(void) +{ + spi_unregister_driver(&pmic_driver); +} +module_exit(pmic_driver_exit); + +MODULE_DESCRIPTION("TPS6524X PMIC Driver"); +MODULE_AUTHOR("Cyril Chemparathy"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:tps6524x"); -- 1.7.1 ------------------------------------------------------------------------------ What happens now with your Lotus Notes apps - do you make another costly upgrade, or settle for being marooned without product support? Time to move off Lotus Notes and onto the cloud with Force.com, apps are easier to build, use, and manage than apps on traditional platforms. Sign up for the Lotus Notes Migration Kit to learn more. http://p.sf.net/sfu/salesforce-d2d