From mboxrd@z Thu Jan 1 00:00:00 1970 From: Claudiu Beznea Subject: [PATCH v5 2/2] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu} Date: Fri, 17 Jan 2020 13:58:29 +0200 Message-ID: <1579262309-6542-3-git-send-email-claudiu.beznea@microchip.com> References: <1579262309-6542-1-git-send-email-claudiu.beznea@microchip.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , Claudiu Beznea To: , , , , , , , Return-path: In-Reply-To: <1579262309-6542-1-git-send-email-claudiu.beznea-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: Add microchip,sam9x60-usart and add microchip,sam9x60-dbgu to DT bindings documentation. Signed-off-by: Claudiu Beznea Acked-for-MFD-by: Lee Jones --- Hi Lee, Between version 3 (that you Acked-for-MFD-by) and this one, there is a new line introduced in this patch: + - "microchip,sam9x60-usart" I kept your Acked-for-MFD-by in this version (with the extra line). Tell me if you consider otherwise. Thank you, Claudiu Beznea Documentation/devicetree/bindings/mfd/atmel-usart.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 614a14b5d205..a09133066aff 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -4,8 +4,10 @@ Required properties for USART: - compatible: Should be one of the following: - "atmel,at91rm9200-usart" - "atmel,at91sam9260-usart" + - "microchip,sam9x60-usart" - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" + - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names. -- 2.7.4