Linux-SPI Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] spi: spidev: Align buffers for DMA
@ 2020-07-28 10:08 Christian Eggers
  2020-07-28 16:31 ` Mark Brown
  0 siblings, 1 reply; 2+ messages in thread
From: Christian Eggers @ 2020-07-28 10:08 UTC (permalink / raw)
  To: Mark Brown; +Cc: linux-spi, linux-kernel, Christian Eggers, stable

Simply copying all xfers from userspace into one bounce buffer causes
alignment problems if the SPI controller uses DMA.

Ensure that all transfer data blocks within the rx and tx bounce buffers
are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).

Alignment may increase the usage of the bounce buffers. In some cases,
the buffers may need to be increased using the "bufsiz" module
parameter.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
---
 drivers/spi/spidev.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 59e07675ef86..455e99c4958e 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -224,6 +224,11 @@ static int spidev_message(struct spidev_data *spidev,
 	for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
 			n;
 			n--, k_tmp++, u_tmp++) {
+		/* Ensure that also following allocations from rx_buf/tx_buf will meet
+		 * DMA alignment requirements.
+		 */
+		unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_KMALLOC_MINALIGN);
+
 		k_tmp->len = u_tmp->len;
 
 		total += k_tmp->len;
@@ -239,17 +244,17 @@ static int spidev_message(struct spidev_data *spidev,
 
 		if (u_tmp->rx_buf) {
 			/* this transfer needs space in RX bounce buffer */
-			rx_total += k_tmp->len;
+			rx_total += len_aligned;
 			if (rx_total > bufsiz) {
 				status = -EMSGSIZE;
 				goto done;
 			}
 			k_tmp->rx_buf = rx_buf;
-			rx_buf += k_tmp->len;
+			rx_buf += len_aligned;
 		}
 		if (u_tmp->tx_buf) {
 			/* this transfer needs space in TX bounce buffer */
-			tx_total += k_tmp->len;
+			tx_total += len_aligned;
 			if (tx_total > bufsiz) {
 				status = -EMSGSIZE;
 				goto done;
@@ -259,7 +264,7 @@ static int spidev_message(struct spidev_data *spidev,
 						(uintptr_t) u_tmp->tx_buf,
 					u_tmp->len))
 				goto done;
-			tx_buf += k_tmp->len;
+			tx_buf += len_aligned;
 		}
 
 		k_tmp->cs_change = !!u_tmp->cs_change;
@@ -293,16 +298,16 @@ static int spidev_message(struct spidev_data *spidev,
 		goto done;
 
 	/* copy any rx data out of bounce buffer */
-	rx_buf = spidev->rx_buffer;
-	for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
+	for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
+			n;
+			n--, k_tmp++, u_tmp++) {
 		if (u_tmp->rx_buf) {
 			if (copy_to_user((u8 __user *)
-					(uintptr_t) u_tmp->rx_buf, rx_buf,
+					(uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf,
 					u_tmp->len)) {
 				status = -EFAULT;
 				goto done;
 			}
-			rx_buf += u_tmp->len;
 		}
 	}
 	status = total;
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] spi: spidev: Align buffers for DMA
  2020-07-28 10:08 [PATCH] spi: spidev: Align buffers for DMA Christian Eggers
@ 2020-07-28 16:31 ` Mark Brown
  0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2020-07-28 16:31 UTC (permalink / raw)
  To: Christian Eggers; +Cc: linux-kernel, stable, linux-spi

On Tue, 28 Jul 2020 12:08:32 +0200, Christian Eggers wrote:
> Simply copying all xfers from userspace into one bounce buffer causes
> alignment problems if the SPI controller uses DMA.
> 
> Ensure that all transfer data blocks within the rx and tx bounce buffers
> are aligned for DMA (according to ARCH_KMALLOC_MINALIGN).
> 
> Alignment may increase the usage of the bounce buffers. In some cases,
> the buffers may need to be increased using the "bufsiz" module
> parameter.

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: spidev: Align buffers for DMA
      commit: aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-28 10:08 [PATCH] spi: spidev: Align buffers for DMA Christian Eggers
2020-07-28 16:31 ` Mark Brown

Linux-SPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-spi/0 linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ https://lore.kernel.org/linux-spi \
		linux-spi@vger.kernel.org
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-spi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git