[V2][PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues

[V2][PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues

[quanyang.wang]

From: Quanyang Wang <quanyang.wang@windriver.com>

Hi all,

V2:
Remove all "Fixes:" tags since they base on some patches are not
with "Fixes:".

V1:
This series fix some issues that occurs in spi-zynqmp-gqspi.c.

Thanks,
Quanyang

Amit Kumar Mahapatra (1):
  spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug

Quanyang Wang (4):
  spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
  spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
  spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
  spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails

 drivers/spi/spi-zynqmp-gqspi.c | 115 +++++++++++++++------------------
 1 file changed, 51 insertions(+), 64 deletions(-)

-- 
2.25.1

[V2][PATCH 1/5] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue

[quanyang.wang]

From: Quanyang Wang <quanyang.wang@windriver.com>

The clks "pclk" and "ref_clk" are enabled twice during the probe. The
first time is in the function zynqmp_qspi_probe and the second time is
in zynqmp_qspi_setup_op which is called by devm_spi_register_controller.
Then calling zynqmp_qspi_remove (rmmod this module) to disable these clks
will trigger a warning as below:

[  309.124604] Unpreparing enabled qspi_ref
[  309.128641] WARNING: CPU: 1 PID: 537 at drivers/clk/clk.c:824 clk_core_unprepare+0x108/0x110

Since pm_runtime works now, clks can be enabled/disabled by calling
zynqmp_runtime_suspend/resume. So we don't need to enable these clks
explicitly in zynqmp_qspi_setup_op. Remove them to fix this issue.

And remove clk enabling/disabling in zynqmp_qspi_resume because there is
no spi transfer operation so enabling ref_clk is redundant meanwhile pclk
is not disabled for it is shared with other peripherals.

Furthermore replace clk_enable/disable with clk_prepare_enable and
clk_disable_unprepare in runtime_suspend/resume functions.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 47 ++++++----------------------------
 1 file changed, 8 insertions(+), 39 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 32e53f379e9b..f9056f0a480c 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -487,24 +487,10 @@ static int zynqmp_qspi_setup_op(struct spi_device *qspi)
 {
 	struct spi_controller *ctlr = qspi->master;
 	struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
-	struct device *dev = &ctlr->dev;
-	int ret;
 
 	if (ctlr->busy)
 		return -EBUSY;
 
-	ret = clk_enable(xqspi->refclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable device clock.\n");
-		return ret;
-	}
-
-	ret = clk_enable(xqspi->pclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable APB clock.\n");
-		clk_disable(xqspi->refclk);
-		return ret;
-	}
 	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
 
 	return 0;
@@ -863,26 +849,9 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
 static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
 {
 	struct spi_controller *ctlr = dev_get_drvdata(dev);
-	struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
-	int ret = 0;
-
-	ret = clk_enable(xqspi->pclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable APB clock.\n");
-		return ret;
-	}
-
-	ret = clk_enable(xqspi->refclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable device clock.\n");
-		clk_disable(xqspi->pclk);
-		return ret;
-	}
 
 	spi_controller_resume(ctlr);
 
-	clk_disable(xqspi->refclk);
-	clk_disable(xqspi->pclk);
 	return 0;
 }
 
@@ -898,8 +867,8 @@ static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
 {
 	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
 
-	clk_disable(xqspi->refclk);
-	clk_disable(xqspi->pclk);
+	clk_disable_unprepare(xqspi->refclk);
+	clk_disable_unprepare(xqspi->pclk);
 
 	return 0;
 }
@@ -917,16 +886,16 @@ static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
 	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
 	int ret;
 
-	ret = clk_enable(xqspi->pclk);
+	ret = clk_prepare_enable(xqspi->pclk);
 	if (ret) {
 		dev_err(dev, "Cannot enable APB clock.\n");
 		return ret;
 	}
 
-	ret = clk_enable(xqspi->refclk);
+	ret = clk_prepare_enable(xqspi->refclk);
 	if (ret) {
 		dev_err(dev, "Cannot enable device clock.\n");
-		clk_disable(xqspi->pclk);
+		clk_disable_unprepare(xqspi->pclk);
 		return ret;
 	}
 
@@ -1136,13 +1105,11 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 		goto remove_master;
 	}
 
-	init_completion(&xqspi->data_completion);
-
 	xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
 	if (IS_ERR(xqspi->refclk)) {
 		dev_err(dev, "ref_clk clock not found.\n");
 		ret = PTR_ERR(xqspi->refclk);
-		goto clk_dis_pclk;
+		goto remove_master;
 	}
 
 	ret = clk_prepare_enable(xqspi->pclk);
@@ -1157,6 +1124,8 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 		goto clk_dis_pclk;
 	}
 
+	init_completion(&xqspi->data_completion);
+
 	mutex_init(&xqspi->op_lock);
 
 	pm_runtime_use_autosuspend(&pdev->dev);
-- 
2.25.1

[V2][PATCH 2/5] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume

[quanyang.wang]

From: Quanyang Wang <quanyang.wang@windriver.com>

After calling platform_set_drvdata(pdev, xqspi) in probe, the return
value of dev_get_drvdata(dev) is a pointer to struct zynqmp_qspi but
not struct spi_controller. A wrong structure type passing to the
functions spi_controller_suspend/resume will hang the system.

And we should check the return value of spi_controller_suspend, if
an error is returned, return it to PM subsystem to stop suspend.

Also, GQSPI_EN_MASK should be written to GQSPI_EN_OFST to enable
the spi controller in zynqmp_qspi_resume since it was disabled in
zynqmp_qspi_suspend before.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index f9056f0a480c..1146359528b9 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -157,6 +157,7 @@ enum mode_type {GQSPI_MODE_IO, GQSPI_MODE_DMA};
  * @data_completion:	completion structure
  */
 struct zynqmp_qspi {
+	struct spi_controller *ctlr;
 	void __iomem *regs;
 	struct clk *refclk;
 	struct clk *pclk;
@@ -827,10 +828,13 @@ static void zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
  */
 static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
 {
-	struct spi_controller *ctlr = dev_get_drvdata(dev);
-	struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
+	struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
+	struct spi_controller *ctlr = xqspi->ctlr;
+	int ret;
 
-	spi_controller_suspend(ctlr);
+	ret = spi_controller_suspend(ctlr);
+	if (ret)
+		return ret;
 
 	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, 0x0);
 
@@ -848,7 +852,10 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
  */
 static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
 {
-	struct spi_controller *ctlr = dev_get_drvdata(dev);
+	struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
+	struct spi_controller *ctlr = xqspi->ctlr;
+
+	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
 
 	spi_controller_resume(ctlr);
 
@@ -865,7 +872,7 @@ static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
  */
 static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
 {
-	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
+	struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
 
 	clk_disable_unprepare(xqspi->refclk);
 	clk_disable_unprepare(xqspi->pclk);
@@ -883,7 +890,7 @@ static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
  */
 static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
 {
-	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
+	struct zynqmp_qspi *xqspi = dev_get_drvdata(dev);
 	int ret;
 
 	ret = clk_prepare_enable(xqspi->pclk);
@@ -1090,6 +1097,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 
 	xqspi = spi_controller_get_devdata(ctlr);
 	xqspi->dev = dev;
+	xqspi->ctlr = ctlr;
 	platform_set_drvdata(pdev, xqspi);
 
 	xqspi->regs = devm_platform_ioremap_resource(pdev, 0);
-- 
2.25.1

[V2][PATCH 3/5] spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug

[quanyang.wang]

From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>

During a transfer the driver filled the fifo with 4bytes,
even if the data that needs to be transfer is less that 4bytes.
This resulted in slab-out-of-bounds bug in KernelAddressSanitizer.

This patch resolves slab-out-of-bounds bug by filling the fifo
with the number of bytes that needs to transferred.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 1146359528b9..2e2607b5dee9 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -509,17 +509,19 @@ static void zynqmp_qspi_filltxfifo(struct zynqmp_qspi *xqspi, int size)
 	u32 count = 0, intermediate;
 
 	while ((xqspi->bytes_to_transfer > 0) && (count < size) && (xqspi->txbuf)) {
-		memcpy(&intermediate, xqspi->txbuf, 4);
-		zynqmp_gqspi_write(xqspi, GQSPI_TXD_OFST, intermediate);
-
 		if (xqspi->bytes_to_transfer >= 4) {
+			memcpy(&intermediate, xqspi->txbuf, 4);
 			xqspi->txbuf += 4;
 			xqspi->bytes_to_transfer -= 4;
+			count += 4;
 		} else {
+			memcpy(&intermediate, xqspi->txbuf,
+			       xqspi->bytes_to_transfer);
 			xqspi->txbuf += xqspi->bytes_to_transfer;
 			xqspi->bytes_to_transfer = 0;
+			count += xqspi->bytes_to_transfer;
 		}
-		count++;
+		zynqmp_gqspi_write(xqspi, GQSPI_TXD_OFST, intermediate);
 	}
 }
 
-- 
2.25.1

[V2][PATCH 4/5] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op

[quanyang.wang]

From: Quanyang Wang <quanyang.wang@windriver.com>

When handling op->addr, it is using the buffer "tmpbuf" which has been
freed. This will trigger a use-after-free KASAN warning. Let's use
temporary variables to store op->addr.val and op->cmd.opcode to fix
this issue.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 2e2607b5dee9..419bc1e6358b 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -928,8 +928,9 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 	struct zynqmp_qspi *xqspi = spi_controller_get_devdata
 				    (mem->spi->master);
 	int err = 0, i;
-	u8 *tmpbuf;
 	u32 genfifoentry = 0;
+	u16 opcode = op->cmd.opcode;
+	u64 opaddr;
 
 	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
 		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
@@ -942,14 +943,8 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 	genfifoentry |= xqspi->genfifobus;
 
 	if (op->cmd.opcode) {
-		tmpbuf = kzalloc(op->cmd.nbytes, GFP_KERNEL | GFP_DMA);
-		if (!tmpbuf) {
-			mutex_unlock(&xqspi->op_lock);
-			return -ENOMEM;
-		}
-		tmpbuf[0] = op->cmd.opcode;
 		reinit_completion(&xqspi->data_completion);
-		xqspi->txbuf = tmpbuf;
+		xqspi->txbuf = &opcode;
 		xqspi->rxbuf = NULL;
 		xqspi->bytes_to_transfer = op->cmd.nbytes;
 		xqspi->bytes_to_receive = 0;
@@ -963,13 +958,12 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 		if (!wait_for_completion_timeout
 		    (&xqspi->data_completion, msecs_to_jiffies(1000))) {
 			err = -ETIMEDOUT;
-			kfree(tmpbuf);
 			goto return_err;
 		}
-		kfree(tmpbuf);
 	}
 
 	if (op->addr.nbytes) {
+		xqspi->txbuf = &opaddr;
 		for (i = 0; i < op->addr.nbytes; i++) {
 			*(((u8 *)xqspi->txbuf) + i) = op->addr.val >>
 					(8 * (op->addr.nbytes - i - 1));
-- 
2.25.1

[V2][PATCH 5/5] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails

[quanyang.wang]

From: Quanyang Wang <quanyang.wang@windriver.com>

The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.

This fixes the following crash which occurs in reading a big block
from flash:

[  123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[  123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[  123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[  123.792536] Mem abort info:
[  123.795313]   ESR = 0x96000145
[  123.798351]   EC = 0x25: DABT (current EL), IL = 32 bits
[  123.803655]   SET = 0, FnV = 0
[  123.806693]   EA = 0, S1PTW = 0
[  123.809818] Data abort info:
[  123.812683]   ISV = 0, ISS = 0x00000145
[  123.816503]   CM = 1, WnR = 1
[  123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[  123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[  123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 419bc1e6358b..328b6559bb19 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -733,7 +733,7 @@ static irqreturn_t zynqmp_qspi_irq(int irq, void *dev_id)
  * zynqmp_qspi_setuprxdma - This function sets up the RX DMA operation
  * @xqspi:	xqspi is a pointer to the GQSPI instance.
  */
-static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
+static int zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
 {
 	u32 rx_bytes, rx_rem, config_reg;
 	dma_addr_t addr;
@@ -747,7 +747,7 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
 		zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST, config_reg);
 		xqspi->mode = GQSPI_MODE_IO;
 		xqspi->dma_rx_bytes = 0;
-		return;
+		return 0;
 	}
 
 	rx_rem = xqspi->bytes_to_receive % 4;
@@ -755,8 +755,10 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
 
 	addr = dma_map_single(xqspi->dev, (void *)xqspi->rxbuf,
 			      rx_bytes, DMA_FROM_DEVICE);
-	if (dma_mapping_error(xqspi->dev, addr))
+	if (dma_mapping_error(xqspi->dev, addr)) {
 		dev_err(xqspi->dev, "ERR:rxdma:memory not mapped\n");
+		return -ENOMEM;
+	}
 
 	xqspi->dma_rx_bytes = rx_bytes;
 	xqspi->dma_addr = addr;
@@ -777,6 +779,8 @@ static void zynqmp_qspi_setuprxdma(struct zynqmp_qspi *xqspi)
 
 	/* Write the number of bytes to transfer */
 	zynqmp_gqspi_write(xqspi, GQSPI_QSPIDMA_DST_SIZE_OFST, rx_bytes);
+
+	return 0;
 }
 
 /**
@@ -813,11 +817,17 @@ static void zynqmp_qspi_write_op(struct zynqmp_qspi *xqspi, u8 tx_nbits,
  * @genfifoentry:	genfifoentry is pointer to the variable in which
  *			GENFIFO	mask is returned to calling function
  */
-static void zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
+static int zynqmp_qspi_read_op(struct zynqmp_qspi *xqspi, u8 rx_nbits,
 				u32 genfifoentry)
 {
-	zynqmp_qspi_setuprxdma(xqspi);
+	int ret;
+
+	ret = zynqmp_qspi_setuprxdma(xqspi);
+	if (ret)
+		return ret;
 	zynqmp_qspi_fillgenfifo(xqspi, rx_nbits, genfifoentry);
+
+	return 0;
 }
 
 /**
@@ -1031,8 +1041,11 @@ static int zynqmp_qspi_exec_op(struct spi_mem *mem,
 			xqspi->rxbuf = (u8 *)op->data.buf.in;
 			xqspi->bytes_to_receive = op->data.nbytes;
 			xqspi->bytes_to_transfer = 0;
-			zynqmp_qspi_read_op(xqspi, op->data.buswidth,
+			err = zynqmp_qspi_read_op(xqspi, op->data.buswidth,
 					    genfifoentry);
+			if (err)
+				goto return_err;
+
 			zynqmp_gqspi_write(xqspi, GQSPI_CONFIG_OFST,
 					   zynqmp_gqspi_read
 					   (xqspi, GQSPI_CONFIG_OFST) |
@@ -1159,6 +1172,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 		goto clk_dis_all;
 	}
 
+	dma_set_mask(&pdev->dev, DMA_BIT_MASK(44));
 	ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
 	ctlr->num_chipselect = GQSPI_DEFAULT_NUM_CS;
 	ctlr->mem_ops = &zynqmp_qspi_mem_ops;
-- 
2.25.1

Re: [PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues

[Mark Brown]

On Fri, 16 Apr 2021 22:20:42 +0800, quanyang.wang@windriver.com wrote:
> V2:
> Remove all "Fixes:" tags since they base on some patches are not
> with "Fixes:".
> 
> V1:
> This series fix some issues that occurs in spi-zynqmp-gqspi.c.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/5] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
      commit: c6bdae08012b2ca3e94f3a41ef4ca8cfe7c9ab6f
[2/5] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
      commit: 799f923f0a66a9c99f0a3eaa078b306db7a8b33a
[3/5] spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug
      commit: 2530b3df4326023a171977ab46fdfeac0340f5b2
[4/5] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
      commit: a2c5bedb2d55dd27c642c7b9fb6886d7ad7bdb58
[5/5] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
      commit: 126bdb606fd2802454e6048caef1be3e25dd121e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues

[Quanyang Wang]

Hi Mark,

Sorry for any confusion caused.

Thanks,

Quanyang

On 4/17/21 12:01 AM, Mark Brown wrote:
> On Fri, 16 Apr 2021 22:20:42 +0800, quanyang.wang@windriver.com wrote:
>> V2:
>> Remove all "Fixes:" tags since they base on some patches are not
>> with "Fixes:".
>>
>> V1:
>> This series fix some issues that occurs in spi-zynqmp-gqspi.c.
>>
>> [...]
> Applied to
>
>     https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
>
> Thanks!
>
> [1/5] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
>        commit: c6bdae08012b2ca3e94f3a41ef4ca8cfe7c9ab6f
> [2/5] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
>        commit: 799f923f0a66a9c99f0a3eaa078b306db7a8b33a
> [3/5] spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug
>        commit: 2530b3df4326023a171977ab46fdfeac0340f5b2
> [4/5] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
>        commit: a2c5bedb2d55dd27c642c7b9fb6886d7ad7bdb58
> [5/5] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails
>        commit: 126bdb606fd2802454e6048caef1be3e25dd121e
>
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
>
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
>
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
>
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
>
> Thanks,
> Mark

Re: [PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 210 bytes --]

On Sat, Apr 17, 2021 at 12:31:44AM +0800, Quanyang Wang wrote:

> Sorry for any confusion caused.

No worries, it's mainly just an issue for anyone doing stable backports
- hopefully they'll figure things out.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues

[quanyang.wang]

From: Quanyang Wang <quanyang.wang@windriver.com>

Hi all,

This series fix some issues that occurs in spi-zynqmp-gqspi.c.

Thanks,
Quanyang

Amit Kumar Mahapatra (1):
  spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug

Quanyang Wang (4):
  spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
  spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume
  spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op
  spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails

 drivers/spi/spi-zynqmp-gqspi.c | 115 +++++++++++++++------------------
 1 file changed, 51 insertions(+), 64 deletions(-)

-- 
2.25.1