From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anton Vorontsov Subject: [PATCH 7/7] [POWERPC][SPI] spi_mpc83xx: allow use on any processors with QUICC Engine Date: Fri, 5 Oct 2007 21:46:33 +0400 Message-ID: <20071005174633.GA32145@localhost.localdomain> References: <20071005174015.GA11016@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org To: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org Return-path: Content-Disposition: inline In-Reply-To: <20071005174015.GA11016-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: spi-devel-general-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-spi.vger.kernel.org Currently, all QE SPI controllers are almost the same comparing to MPC83xx's, thus let's use that driver for them. Tested to work on MPC85xx in loopback mode. Signed-off-by: Anton Vorontsov --- This is respin. Hope this time it will get ack from the PowerPC team. drivers/spi/Kconfig | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index b915711..a77ede5 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -124,16 +124,17 @@ config SPI_MPC52xx_PSC Controller in master SPI mode. config SPI_MPC83xx - tristate "Freescale MPC83xx SPI controller" - depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL + tristate "Freescale MPC83xx/QUICC Engine SPI controller" + depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL select SPI_BITBANG help - This enables using the Freescale MPC83xx SPI controller in master - mode. + This enables using the Freescale MPC83xx and QUICC Engine SPI + controllers in master mode. Note, this driver uniquely supports the SPI controller on the MPC83xx - family of PowerPC processors. The MPC83xx uses a simple set of shift - registers for data (opposed to the CPM based descriptor model). + family of PowerPC processors, plus processors with QUICC Engine + technology. This driver uses a simple set of shift registers for data + (opposed to the CPM based descriptor model). config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" -- 1.5.0.6 ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/