From: David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
To: Andrew Morton <akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org>
Cc: spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Subject: [patch 2.6.8-rc6 3/3] spi: use generic gpio calls in spi_s3c24xx_gpio
Date: Sat, 22 Nov 2008 12:19:17 -0800 [thread overview]
Message-ID: <200811221219.17491.david-b@pacbell.net> (raw)
From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Change the spi_s3c2410 driver to use the generic gpio calls that
are now available.
Signed-off-by: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
---
arch/arm/mach-s3c2410/include/mach/spi.h | 2 -
drivers/spi/spi_s3c24xx.c | 38 ++++++++++++++++++++++-------
2 files changed, 30 insertions(+), 10 deletions(-)
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -14,7 +14,7 @@
#define __ASM_ARCH_SPI_H __FILE__
struct s3c2410_spi_info {
- unsigned long pin_cs; /* simple gpio cs */
+ int pin_cs; /* simple gpio cs */
unsigned int num_cs; /* total chipselects */
int bus_num; /* bus number to use. */
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -19,6 +19,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
@@ -27,7 +28,6 @@
#include <asm/dma.h>
#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <mach/spi.h>
@@ -66,7 +66,7 @@ static inline struct s3c24xx_spi *to_hw(
static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
{
- s3c2410_gpio_setpin(spi->pin_cs, pol);
+ gpio_set_value(spi->pin_cs, pol);
}
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
@@ -248,8 +248,13 @@ static void s3c24xx_spi_initialsetup(str
writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
- if (hw->pdata && hw->pdata->gpio_setup)
- hw->pdata->gpio_setup(hw->pdata, 1);
+ if (hw->pdata) {
+ if (hw->set_cs == s3c24xx_spi_gpiocs)
+ gpio_direction_output(hw->pdata->pin_cs, 1);
+
+ if (hw->pdata->gpio_setup)
+ hw->pdata->gpio_setup(hw->pdata, 1);
+ }
}
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
@@ -343,18 +348,27 @@ static int __init s3c24xx_spi_probe(stru
goto err_no_clk;
}
- s3c24xx_spi_initialsetup(hw);
-
/* setup any gpio we can */
if (!pdata->set_cs) {
- hw->set_cs = s3c24xx_spi_gpiocs;
+ if (pdata->pin_cs < 0) {
+ dev_err(&pdev->dev, "No chipselect pin\n");
+ goto err_register;
+ }
- s3c2410_gpio_setpin(pdata->pin_cs, 1);
- s3c2410_gpio_cfgpin(pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+ err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
+ if (err) {
+ dev_err(&pdev->dev, "Failed to get gpio for cs\n");
+ goto err_register;
+ }
+
+ hw->set_cs = s3c24xx_spi_gpiocs;
+ gpio_direction_output(pdata->pin_cs, 1);
} else
hw->set_cs = pdata->set_cs;
+ s3c24xx_spi_initialsetup(hw);
+
/* register our spi controller */
err = spi_bitbang_start(&hw->bitbang);
@@ -366,6 +380,9 @@ static int __init s3c24xx_spi_probe(stru
return 0;
err_register:
+ if (hw->set_cs == s3c24xx_spi_gpiocs)
+ gpio_free(pdata->pin_cs);
+
clk_disable(hw->clk);
clk_put(hw->clk);
@@ -401,6 +418,9 @@ static int __exit s3c24xx_spi_remove(str
free_irq(hw->irq, hw);
iounmap(hw->regs);
+ if (hw->set_cs == s3c24xx_spi_gpiocs)
+ gpio_free(hw->pdata->pin_cs);
+
release_resource(hw->ioarea);
kfree(hw->ioarea);
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
reply other threads:[~2008-11-22 20:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811221219.17491.david-b@pacbell.net \
--to=david-b-ybekhbn/0ldr7s880joybq@public.gmane.org \
--cc=akpm-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=spi-devel-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).