From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Kumar Gala <galak@kernel.crashing.org>,
spi-devel-general@lists.sourceforge.net, linuxppc-dev@ozlabs.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/8] spi_mpc8xxx: Factor out SPI mode change steps into a call
Date: Sat, 15 Aug 2009 02:26:03 +0400 [thread overview]
Message-ID: <20090814222603.GF14458@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090814222453.GA9568@oksana.dev.rtsoft.ru>
We'll add more steps soon, so get rid of the duplication.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/spi/spi_mpc8xxx.c | 56 +++++++++++++++++++-------------------------
1 files changed, 24 insertions(+), 32 deletions(-)
diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index 518671b..4b119ea 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -155,6 +155,26 @@ MPC83XX_SPI_TX_BUF(u8)
MPC83XX_SPI_TX_BUF(u16)
MPC83XX_SPI_TX_BUF(u32)
+static void mpc8xxx_spi_change_mode(struct spi_device *spi)
+{
+ struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
+ struct spi_mpc8xxx_cs *cs = spi->controller_state;
+ __be32 __iomem *mode = &mspi->base->mode;
+ unsigned long flags;
+
+ if (cs->hw_mode == mpc8xxx_spi_read_reg(mode))
+ return;
+
+ /* Turn off IRQs locally to minimize time that SPI is disabled. */
+ local_irq_save(flags);
+
+ /* Turn off SPI unit prior changing mode */
+ mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE);
+ mpc8xxx_spi_write_reg(mode, cs->hw_mode);
+
+ local_irq_restore(flags);
+}
+
static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
@@ -168,27 +188,13 @@ static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value)
}
if (value == BITBANG_CS_ACTIVE) {
- u32 regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
-
mpc8xxx_spi->rx_shift = cs->rx_shift;
mpc8xxx_spi->tx_shift = cs->tx_shift;
mpc8xxx_spi->get_rx = cs->get_rx;
mpc8xxx_spi->get_tx = cs->get_tx;
- if (cs->hw_mode != regval) {
- unsigned long flags;
- __be32 __iomem *mode = &mpc8xxx_spi->base->mode;
-
- regval = cs->hw_mode;
- /* Turn off IRQs locally to minimize time that
- * SPI is disabled
- */
- local_irq_save(flags);
- /* Turn off SPI unit prior changing mode */
- mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
- mpc8xxx_spi_write_reg(mode, regval);
- local_irq_restore(flags);
- }
+ mpc8xxx_spi_change_mode(spi);
+
if (pdata->cs_control)
pdata->cs_control(spi, pol);
}
@@ -198,7 +204,6 @@ static
int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
{
struct mpc8xxx_spi *mpc8xxx_spi;
- u32 regval;
u8 bits_per_word, pm;
u32 hz;
struct spi_mpc8xxx_cs *cs = spi->controller_state;
@@ -286,21 +291,8 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
pm--;
cs->hw_mode |= SPMODE_PM(pm);
- regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
- if (cs->hw_mode != regval) {
- unsigned long flags;
- __be32 __iomem *mode = &mpc8xxx_spi->base->mode;
-
- regval = cs->hw_mode;
- /* Turn off IRQs locally to minimize time
- * that SPI is disabled
- */
- local_irq_save(flags);
- /* Turn off SPI unit prior changing mode */
- mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
- mpc8xxx_spi_write_reg(mode, regval);
- local_irq_restore(flags);
- }
+
+ mpc8xxx_spi_change_mode(spi);
return 0;
}
--
1.6.3.3
next prev parent reply other threads:[~2009-08-14 22:26 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-14 22:24 [PATCH 0/8] spi_mpc8xxx: Add support for DMA transfers Anton Vorontsov
2009-08-14 22:25 ` [PATCH 1/8] powerpc/cpm: Remove SPI defines and spi structs Anton Vorontsov
2009-08-14 22:25 ` [PATCH 2/8] powerpc/qe&cpm2: Avoid redefinitions in CPM2 and QE headers Anton Vorontsov
2009-08-14 22:25 ` [PATCH 3/8] powerpc/cpm: Move CPMFCR_* defines into cpm.h Anton Vorontsov
2009-08-14 22:25 ` [PATCH 4/8] powerpc/qe&cpm: Implement static inline stubs for non-QE/CPM builds Anton Vorontsov
2009-08-17 13:53 ` Anton Vorontsov
2009-08-14 22:25 ` [PATCH 5/8] spi_mpc8xxx: Fix uninitialized variable Anton Vorontsov
2009-08-14 22:26 ` Anton Vorontsov [this message]
2009-08-14 22:26 ` [PATCH 7/8] spi_mpc8xxx: Turn qe_mode into flags Anton Vorontsov
2009-08-14 22:26 ` [PATCH 8/8] spi_mpc8xxx: Add support for QE DMA mode and CPM1/CPM2 chips Anton Vorontsov
2009-08-18 22:03 [PATCH v2 0/8] spi_mpc8xxx: Add support for DMA transfers Anton Vorontsov
2009-08-18 22:04 ` [PATCH 6/8] spi_mpc8xxx: Factor out SPI mode change steps into a call Anton Vorontsov
2009-10-12 16:48 [RESEND][PATCH 0/8] spi_mpc8xxx: Add support for DMA transfers Anton Vorontsov
[not found] ` <20091012164841.GA32214-wnGakbxT3iijyJ0x5qLZdcN33GVbZNy3@public.gmane.org>
2009-10-12 16:49 ` [PATCH 6/8] spi_mpc8xxx: Factor out SPI mode change steps into a call Anton Vorontsov
2009-11-05 13:47 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090814222603.GF14458@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=galak@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).