From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anton Vorontsov Subject: [PATCH 2/8] powerpc/qe&cpm2: Avoid redefinitions in CPM2 and QE headers Date: Mon, 12 Oct 2009 20:49:16 +0400 Message-ID: <20091012164916.GB4578@oksana.dev.rtsoft.ru> References: <20091012164841.GA32214@oksana.dev.rtsoft.ru> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: David Brownell , Greg Kroah-Hartman , linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org, spi-devel-general@lists.sourceforge.net, Andrew Morton To: Kumar Gala Return-path: Content-Disposition: inline In-Reply-To: <20091012164841.GA32214@oksana.dev.rtsoft.ru> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linuxppc-dev-bounces+glppd-linuxppc64-dev=m.gmane.org@lists.ozlabs.org Errors-To: linuxppc-dev-bounces+glppd-linuxppc64-dev=m.gmane.org@lists.ozlabs.org List-Id: linux-spi.vger.kernel.org struct mcc defined in both immap_qe.h and immap_cpm2.h, so they will conflic when included in a single file. The mcc struct is easy to deal with, since it isn't used in any driver (yet), so let's just rename QE version to qe_mcc. The ucb_ctlr is a bit trickier, since it is used by fsl_qe_udc driver, and the driver supports both CPM and QE UDCs, plus the QE version is used to form a bigger immap struct. I don't want to touch too much of USB code in this series, so for now let's just copy most generic version into the common cpm.h header, later we'll create cpm_usb.h where we'll place common USB structs that are used by QE/CPM UDC and QE Host drivers (FHCI). And as for the structs in qe.h and cpm2.h, just prefix them with qe_ and cpm_. Signed-off-by: Anton Vorontsov --- arch/powerpc/include/asm/cpm.h | 22 ++++++++++++++++++++++ arch/powerpc/include/asm/immap_cpm2.h | 2 +- arch/powerpc/include/asm/immap_qe.h | 8 ++++---- 3 files changed, 27 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h index 24d79e3..b5f1534 100644 --- a/arch/powerpc/include/asm/cpm.h +++ b/arch/powerpc/include/asm/cpm.h @@ -5,6 +5,28 @@ #include #include +/* + * USB Controller pram common to QE and CPM. + */ +struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep[4]; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + /* Fields down below are QE-only */ + __be16 usb_ussft; + u8 res5[2]; + __be16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)); + /* Opcodes common to CPM1 and CPM2 */ #define CPM_CR_INIT_TRX ((ushort)0x0000) diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h index d4f069b..7c64fda 100644 --- a/arch/powerpc/include/asm/immap_cpm2.h +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -549,7 +549,7 @@ typedef struct comm_proc { /* USB Controller. */ -typedef struct usb_ctlr { +typedef struct cpm_usb_ctlr { u8 usb_usmod; u8 usb_usadr; u8 usb_uscom; diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index c346d0b..4e10f50 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -210,7 +210,7 @@ struct sir { } __attribute__ ((packed)); /* USB Controller */ -struct usb_ctlr { +struct qe_usb_ctlr { u8 usb_usmod; u8 usb_usadr; u8 usb_uscom; @@ -229,7 +229,7 @@ struct usb_ctlr { } __attribute__ ((packed)); /* MCC */ -struct mcc { +struct qe_mcc { __be32 mcce; /* MCC event register */ __be32 mccm; /* MCC mask register */ __be32 mccf; /* MCC configuration register */ @@ -431,9 +431,9 @@ struct qe_immap { struct qe_mux qmx; /* QE Multiplexer */ struct qe_timers qet; /* QE Timers */ struct spi spi[0x2]; /* spi */ - struct mcc mcc; /* mcc */ + struct qe_mcc mcc; /* mcc */ struct qe_brg brg; /* brg */ - struct usb_ctlr usb; /* USB */ + struct qe_usb_ctlr usb; /* USB */ struct si1 si1; /* SI */ u8 res11[0x800]; struct sir sir; /* SI Routing Tables */ -- 1.6.3.3