From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Brownell <david-b@pacbell.net>
Subject: Re: [RFC][PATCH v3] serial: spi: add spi-uart driver for Maxim 3110
Date: Thu, 25 Feb 2010 00:11:50 -0800
Message-ID: <201002250011.51269.david-b@pacbell.net>
References: <20091229222006.1ddb28a4@feng-desktop> <201002242043.15231.david-b@pacbell.net> <20100225154411.6d1ec4d0@feng-i7>
Mime-Version: 1.0
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Cc: Greg KH <greg@kroah.com>, Grant Likely <grant.likely@secretlab.ca>,
	Andrew Morton <akpm@linux-foundation.org>,
	"Greg Kroah-Hartman" <gregkh@suse.de>,
	"spi-devel-list" <spi-devel-general@lists.sourceforge.net>,
	"linux-serial@vger.kernel.org" <linux-serial@vger.kernel.org>,
	"alan@lxorguk.ukuu.org.uk" <alan@lxorguk.ukuu.org.uk>
To: Feng Tang <feng.tang@intel.com>
Return-path: <linux-serial-owner@vger.kernel.org>
In-Reply-To: <20100225154411.6d1ec4d0@feng-i7>
Content-Disposition: inline
Sender: linux-serial-owner@vger.kernel.org
List-Id: linux-spi.vger.kernel.org

On Wednesday 24 February 2010, Feng Tang wrote:
> Good point about the DW controller specific data, I'll remove them.

Good.


> For those "bits_per_word" setting, I think we can put it here instead of
> the board initialization code, as many types of boards can leverage the
> setting here as it only works in 16b mode.

Yes.  The bits-per-word setting is mostly driver-specific, so
that's appropriate as something the driver updates.

- Dave