On Wed, 11 May 2011 15:08:53 +0200
Mark Brown <broonie@opensource.wolfsonmicro.com> wrote:

[...]
> > +	switch (power_mode) {
> > +	case MMC_POWER_OFF:
> > +		if (host->vcc) {
> > +			int ret = mmc_regulator_set_ocr(host->mmc,
> > +							host->vcc, 0);
> > +			if (ret)
> > +				return ret;
> > +		} else {
> > +			host->pdata->setpower(&host->spi->dev, vdd);
> > +		}
> > +		break;
> > +
> > +	case MMC_POWER_UP:
> > +		if (host->vcc) {
> > +			int ret = mmc_regulator_set_ocr(host->mmc,
> > +							host->vcc, vdd);
> > +			if (ret)
> > +				return ret;
> > +		} else {
> >  			host->pdata->setpower(&host->spi->dev, vdd);
> > -			if (power_mode == MMC_POWER_UP)
> > -				msleep(host->powerup_msecs);
> >  		}
> > +		msleep(host->powerup_msecs);
> > +		break;
> 
> This stuff all looks like it should be factored out.
> 

OK, avoiding some duplication will be good, I agree.

I am resending a v4 with the equivalent code:

	if (host->vcc) {
		int ret;

		if (power_mode == MMC_POWER_OFF)
			vdd = 0;

		ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
		if (ret)
			return ret;
	} else {
		host->pdata->setpower(&host->spi->dev, vdd);
	}

	if (power_mode == MMC_POWER_UP)
		msleep(host->powerup_msecs);


Thanks,
   Antonio

-- 
Antonio Ospite
http://ao2.it

PGP public key ID: 0x4553B001

A: Because it messes up the order in which people normally read text.
   See http://en.wikipedia.org/wiki/Posting_style
Q: Why is top-posting such a bad thing?