From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hauke Mehrtens Subject: [PATCH v5 16/16] MIPS: lantiq: Remove the arch/mips/lantiq/xway/reset.c implementation Date: Wed, 21 Jun 2017 00:37:43 +0200 Message-ID: <20170620223743.13735-17-hauke@hauke-m.de> References: <20170620223743.13735-1-hauke@hauke-m.de> Cc: linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org, linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org, john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, hauke.mehrtens-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org, robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, Hauke Mehrtens To: ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org Return-path: In-Reply-To: <20170620223743.13735-1-hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org> Sender: linux-spi-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-ID: From: Martin Blumenstingl The RCU register are now access through separates drivers. remove the last pieces of the old implementation. The GPHY reset bits are now set by the GPHY driver which registers a reboot notifier. The reboot is triggered by a syscon-reboot driver and the MIPS specific parts are done by the generic MIPS implementation in arch/mips/kernel/reset.c. Signed-off-by: Hauke Mehrtens --- arch/mips/lantiq/Kconfig | 1 + arch/mips/lantiq/xway/Makefile | 2 +- arch/mips/lantiq/xway/reset.c | 147 ----------------------------------------- 3 files changed, 2 insertions(+), 148 deletions(-) delete mode 100644 arch/mips/lantiq/xway/reset.c diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index f5db4a426568..35bc69b78268 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -18,6 +18,7 @@ config SOC_XWAY select SOC_TYPE_XWAY select HW_HAS_PCI select MFD_SYSCON + select MFD_CORE config SOC_FALCON bool "FALCON" diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile index 6daf3149e7ca..fbb0747c70b7 100644 --- a/arch/mips/lantiq/xway/Makefile +++ b/arch/mips/lantiq/xway/Makefile @@ -1,3 +1,3 @@ -obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o +obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o obj-y += vmmc.o diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c deleted file mode 100644 index 04cd9a7c04a3..000000000000 --- a/arch/mips/lantiq/xway/reset.c +++ /dev/null @@ -1,147 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2010 John Crispin - * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include "../prom.h" - -/* reset request register */ -#define RCU_RST_REQ 0x0010 -/* reset status register */ -#define RCU_RST_STAT 0x0014 - -/* xbar BE flag */ -#define RCU_AHB_ENDIAN 0x004C -#define RCU_VR9_BE_AHB1S 0x00000008 - -/* reboot bit */ -#define RCU_RD_GPHY0_XRX200 BIT(31) -#define RCU_RD_SRST BIT(30) -#define RCU_RD_GPHY1_XRX200 BIT(29) - -/* reset cause */ -#define RCU_STAT_SHIFT 26 -/* boot selection */ -#define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) -#define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) - -/* dwc2 USB configuration registers */ -#define RCU_USB1CFG 0x0018 -#define RCU_USB2CFG 0x0034 - -/* USB DMA endianness bits */ -#define RCU_USBCFG_HDSEL_BIT BIT(11) -#define RCU_USBCFG_HOST_END_BIT BIT(10) -#define RCU_USBCFG_SLV_END_BIT BIT(9) - -/* USB reset bits */ -#define RCU_USBRESET 0x0010 - -#define USBRESET_BIT BIT(4) - -#define RCU_USBRESET2 0x0048 - -#define USB1RESET_BIT BIT(4) -#define USB2RESET_BIT BIT(5) - -#define RCU_CFG1A 0x0038 -#define RCU_CFG1B 0x003C - -/* USB PMU devices */ -#define PMU_AHBM BIT(15) -#define PMU_USB0 BIT(6) -#define PMU_USB1 BIT(27) - -/* USB PHY PMU devices */ -#define PMU_USB0_P BIT(0) -#define PMU_USB1_P BIT(26) - -/* remapped base addr of the reset control unit */ -static void __iomem *ltq_rcu_membase; -static struct device_node *ltq_rcu_np; - -static void ltq_rcu_w32(uint32_t val, uint32_t reg_off) -{ - ltq_w32(val, ltq_rcu_membase + reg_off); -} - -static uint32_t ltq_rcu_r32(uint32_t reg_off) -{ - return ltq_r32(ltq_rcu_membase + reg_off); -} - -static void ltq_machine_restart(char *command) -{ - u32 val = ltq_rcu_r32(RCU_RST_REQ); - - if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) - val |= RCU_RD_GPHY1_XRX200 | RCU_RD_GPHY0_XRX200; - - val |= RCU_RD_SRST; - - local_irq_disable(); - ltq_rcu_w32(val, RCU_RST_REQ); - unreachable(); -} - -static void ltq_machine_halt(void) -{ - local_irq_disable(); - unreachable(); -} - -static void ltq_machine_power_off(void) -{ - local_irq_disable(); - unreachable(); -} - -static int __init mips_reboot_setup(void) -{ - struct resource res; - - ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway"); - if (!ltq_rcu_np) - ltq_rcu_np = of_find_compatible_node(NULL, NULL, - "lantiq,rcu-xrx200"); - - /* check if all the reset register range is available */ - if (!ltq_rcu_np) - panic("Failed to load reset resources from devicetree"); - - if (of_address_to_resource(ltq_rcu_np, 0, &res)) - panic("Failed to get rcu memory range"); - - if (!request_mem_region(res.start, resource_size(&res), res.name)) - pr_err("Failed to request rcu memory"); - - ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res)); - if (!ltq_rcu_membase) - panic("Failed to remap core memory"); - - _machine_restart = ltq_machine_restart; - _machine_halt = ltq_machine_halt; - pm_power_off = ltq_machine_power_off; - - return 0; -} - -arch_initcall(mips_reboot_setup); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html