On Wed 2018-10-10 19:22:57, Lubomir Rintel wrote: > Avoid using the x86 OLPC platform specific call to get the board > version. It won't work on FDT-based ARM MMP2 platform. > > Signed-off-by: Lubomir Rintel > Reviewed-by: Andy Shevchenko Acked-by: Pavel Machek AFAICT, this should go earlier in the series; first, add support in the code, then switch to new name in DTS. Pavel > --- > drivers/power/supply/olpc_battery.c | 10 +++++++--- > 1 file changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c > index 5a97e42a3547..540d44bf536f 100644 > --- a/drivers/power/supply/olpc_battery.c > +++ b/drivers/power/supply/olpc_battery.c > @@ -19,6 +19,7 @@ > #include > #include > #include > +#include > #include > > > @@ -622,11 +623,13 @@ static int olpc_battery_probe(struct platform_device *pdev) > olpc_ac = power_supply_register(&pdev->dev, &olpc_ac_desc, NULL); > if (IS_ERR(olpc_ac)) > return PTR_ERR(olpc_ac); > - > - if (olpc_board_at_least(olpc_board_pre(0xd0))) { /* XO-1.5 */ > + if (of_property_match_string(pdev->dev.of_node, "compatible", > + "olpc,xo1.5-battery") >= 0) { > + /* XO-1.5 */ > olpc_bat_desc.properties = olpc_xo15_bat_props; > olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo15_bat_props); > - } else { /* XO-1 */ > + } else { > + /* XO-1 */ > olpc_bat_desc.properties = olpc_xo1_bat_props; > olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo1_bat_props); > } > @@ -672,6 +675,7 @@ static int olpc_battery_remove(struct platform_device *pdev) > > static const struct of_device_id olpc_battery_ids[] = { > { .compatible = "olpc,xo1-battery" }, > + { .compatible = "olpc,xo1.5-battery" }, > {} > }; > MODULE_DEVICE_TABLE(of, olpc_battery_ids); -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html