archive mirror
 help / color / mirror / Atom feed
From: Andre Przywara <>
To: Maxime Ripard <>,
	Chen-Yu Tsai <>
	Mark Brown <>,
	Icenowy Zheng <>,
	Mark Rutland <>,
	Rob Herring <>,,
Subject: [PATCH v2 0/3] arm64: dts: sun50i: H6: Enable SPI controller
Date: Thu, 16 Jan 2020 00:56:51 +0000	[thread overview]
Message-ID: <> (raw)

Even though the SPI controller in the Allwinner H6 SoC is more advanced
than in the previous generations (it supports 3-wire and 4-wire mode),
the register set stays backwards-compatible. So we can use the existing
driver to use the "normal" SPI mode, for instance to access the SPI
flash soldered on the Pine H64 board.

These two patches allow this by adding the SPI controller nodes to the
DT. The compatible strings include an H6 specific name, so that any
future 4-wire enhancements for instance would be automatically usable
once the driver learns this new trick. For now we use the H3 fallback
name to bind the current driver.

This time I tested this actual branch  (on top of sunxi/dt-for-5.6),
on a Pine H64, both the internal SPI flash as well with SPI flash
connected to the other SPI controller available on the GPIO headers.

As the SPI0-CS0 pin clashes with the eMMC CMD pin, we keep this
node disabled by default, to avoid losing the eMMC if it probes last.
People (or U-Boot) can enable it if needed.


Changelog v1 ... v2:
- comment on pinmux clash between eMMC and SPI
- disable Pine H64 SPI flash node by default
- add binding doc for the new compatible string

Andre Przywara (3):
  arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes
  arm64: dts: allwinner: h6: Pine H64: Add SPI flash node
  dt-bindings: spi: sunxi: Document new compatible strings

 .../bindings/spi/allwinner,sun6i-a31-spi.yaml      | 12 +++--
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts      | 19 ++++++++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi       | 55 ++++++++++++++++++++++
 3 files changed, 83 insertions(+), 3 deletions(-)


             reply	other threads:[~2020-01-16  0:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16  0:56 Andre Przywara [this message]
     [not found] ` <>
2020-01-16  0:56   ` [PATCH v2 1/3] arm64: dts: sun50i: H6: Add SPI controllers nodes and pinmuxes Andre Przywara
2020-01-16  0:56   ` [PATCH v2 2/3] arm64: dts: allwinner: h6: Pine H64: Add SPI flash node Andre Przywara
2020-01-16  0:56   ` [PATCH v2 3/3] dt-bindings: spi: sunxi: Document new compatible strings Andre Przywara
     [not found]     ` <>
2020-01-16 14:23       ` Maxime Ripard
     [not found]         ` <>
2020-01-16 14:38           ` Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \
    --cc=linux-sunxi-/ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).