linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sowjanya Komatineni
	<skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH AUTOSEL 4.19 267/671] spi: tegra114: fix for unpacked mode transfers
Date: Thu, 16 Jan 2020 11:58:25 -0500	[thread overview]
Message-ID: <20200116170509.12787-4-sashal@kernel.org> (raw)
In-Reply-To: <20200116170509.12787-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

From: Sowjanya Komatineni <skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[ Upstream commit 1a89ac5b91895127f7c586ec5075c3753ca25501 ]

Fixes: computation of actual bytes to fill/receive in/from FIFO in unpacked
mode when transfer length is not a multiple of requested bits per word.

unpacked mode transfers fails when the transfer includes partial bytes in
the last word.

Total words to be written/read to/from FIFO is computed based on transfer
length and bits per word. Unpacked mode includes 0 padding bytes for partial
words to align with bits per word and these extra bytes are also accounted
for calculating bytes left to transfer in the current driver.

This causes extra bytes access of tx/rx buffers along with buffer index
position crossing actual length where remain_len becomes negative and due to
unsigned type, negative value is a 32 bit representation of signed value
and transferred bytes never meets the actual transfer length resulting in
transfer timeout and a hang.

This patch fixes this with proper computation of the actual bytes to fill in
FIFO during transmit and the actual bytes to read from FIFO during receive
ignoring 0 padded bytes.

Signed-off-by: Sowjanya Komatineni <skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-tegra114.c | 43 +++++++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index fd039cab768a..17c2c78318f7 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -307,10 +307,16 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tegra_spi_writel(tspi, x, SPI_TX_FIFO);
 		}
+
+		tspi->cur_tx_pos += written_words * tspi->bytes_per_word;
 	} else {
+		unsigned int write_bytes;
 		max_n_32bit = min(tspi->curr_dma_words,  tx_empty_count);
 		written_words = max_n_32bit;
 		nbytes = written_words * tspi->bytes_per_word;
+		if (nbytes > t->len - tspi->cur_pos)
+			nbytes = t->len - tspi->cur_pos;
+		write_bytes = nbytes;
 		for (count = 0; count < max_n_32bit; count++) {
 			u32 x = 0;
 
@@ -319,8 +325,10 @@ static unsigned tegra_spi_fill_tx_fifo_from_client_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tegra_spi_writel(tspi, x, SPI_TX_FIFO);
 		}
+
+		tspi->cur_tx_pos += write_bytes;
 	}
-	tspi->cur_tx_pos += written_words * tspi->bytes_per_word;
+
 	return written_words;
 }
 
@@ -344,20 +352,27 @@ static unsigned int tegra_spi_read_rx_fifo_to_client_rxbuf(
 			for (i = 0; len && (i < 4); i++, len--)
 				*rx_buf++ = (x >> i*8) & 0xFF;
 		}
-		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 		read_words += tspi->curr_dma_words;
+		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
+		u8 bytes_per_word = tspi->bytes_per_word;
+		unsigned int read_bytes;
 
+		len = rx_full_count * bytes_per_word;
+		if (len > t->len - tspi->cur_pos)
+			len = t->len - tspi->cur_pos;
+		read_bytes = len;
 		for (count = 0; count < rx_full_count; count++) {
 			u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask;
 
-			for (i = 0; (i < tspi->bytes_per_word); i++)
+			for (i = 0; len && (i < bytes_per_word); i++, len--)
 				*rx_buf++ = (x >> (i*8)) & 0xFF;
 		}
-		tspi->cur_rx_pos += rx_full_count * tspi->bytes_per_word;
 		read_words += rx_full_count;
+		tspi->cur_rx_pos += read_bytes;
 	}
+
 	return read_words;
 }
 
@@ -372,12 +387,17 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
 		unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
 
 		memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len);
+		tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		unsigned int i;
 		unsigned int count;
 		u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
 		unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
+		unsigned int write_bytes;
 
+		if (consume > t->len - tspi->cur_pos)
+			consume = t->len - tspi->cur_pos;
+		write_bytes = consume;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			u32 x = 0;
 
@@ -386,8 +406,9 @@ static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
 				x |= (u32)(*tx_buf++) << (i * 8);
 			tspi->tx_dma_buf[count] = x;
 		}
+
+		tspi->cur_tx_pos += write_bytes;
 	}
-	tspi->cur_tx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 
 	/* Make the dma buffer to read by dma */
 	dma_sync_single_for_device(tspi->dev, tspi->tx_dma_phys,
@@ -405,20 +426,28 @@ static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf(
 		unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
 
 		memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len);
+		tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 	} else {
 		unsigned int i;
 		unsigned int count;
 		unsigned char *rx_buf = t->rx_buf + tspi->cur_rx_pos;
 		u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
+		unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
+		unsigned int read_bytes;
 
+		if (consume > t->len - tspi->cur_pos)
+			consume = t->len - tspi->cur_pos;
+		read_bytes = consume;
 		for (count = 0; count < tspi->curr_dma_words; count++) {
 			u32 x = tspi->rx_dma_buf[count] & rx_mask;
 
-			for (i = 0; (i < tspi->bytes_per_word); i++)
+			for (i = 0; consume && (i < tspi->bytes_per_word);
+							i++, consume--)
 				*rx_buf++ = (x >> (i*8)) & 0xFF;
 		}
+
+		tspi->cur_rx_pos += read_bytes;
 	}
-	tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
 
 	/* Make the dma buffer to read by dma */
 	dma_sync_single_for_device(tspi->dev, tspi->rx_dma_phys,
-- 
2.20.1

  parent reply	other threads:[~2020-01-16 16:58 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200116170509.12787-1-sashal@kernel.org>
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 266/671] spi: tegra114: clear packed bit for unpacked mode Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 268/671] spi: tegra114: terminate dma and reset on transfer timeout Sasha Levin
     [not found] ` <20200116170509.12787-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-01-16 16:58   ` Sasha Levin [this message]
2020-01-16 16:58   ` [PATCH AUTOSEL 4.19 269/671] spi: tegra114: flush fifos Sasha Levin
2020-01-16 17:00   ` [PATCH AUTOSEL 4.19 370/671] spi: spi-fsl-spi: call spi_finalize_current_message() at the end Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 270/671] spi: tegra114: configure dma burst size to fifo trig level Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 274/671] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 484/671] spi: bcm-qspi: Fix BSPI QUAD and DUAL mode support when using flex mode Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 623/671] spi: atmel: fix handling of cs_change set on non-last xfer Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116170509.12787-4-sashal@kernel.org \
    --to=sashal-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).