linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sowjanya Komatineni
	<skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH AUTOSEL 4.19 269/671] spi: tegra114: flush fifos
Date: Thu, 16 Jan 2020 11:58:27 -0500	[thread overview]
Message-ID: <20200116170509.12787-6-sashal@kernel.org> (raw)
In-Reply-To: <20200116170509.12787-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

From: Sowjanya Komatineni <skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

[ Upstream commit c4fc9e5b28ff787e35137c2cc13316bb11d7657b ]

Fixes: Flush TX and RX FIFOs before start of new transfer and on FIFO
overflow or underrun errors.

Signed-off-by: Sowjanya Komatineni <skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 drivers/spi/spi-tegra114.c | 39 +++++++++++++++++++++++++++++---------
 1 file changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index b1b726673f85..5114b8008472 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -499,22 +499,37 @@ static int tegra_spi_start_rx_dma(struct tegra_spi_data *tspi, int len)
 	return 0;
 }
 
-static int tegra_spi_start_dma_based_transfer(
-		struct tegra_spi_data *tspi, struct spi_transfer *t)
+static int tegra_spi_flush_fifos(struct tegra_spi_data *tspi)
 {
-	u32 val;
-	unsigned int len;
-	int ret = 0;
+	unsigned long timeout = jiffies + HZ;
 	u32 status;
 
-	/* Make sure that Rx and Tx fifo are empty */
 	status = tegra_spi_readl(tspi, SPI_FIFO_STATUS);
 	if ((status & SPI_FIFO_EMPTY) != SPI_FIFO_EMPTY) {
-		dev_err(tspi->dev, "Rx/Tx fifo are not empty status 0x%08x\n",
-			(unsigned)status);
-		return -EIO;
+		status |= SPI_RX_FIFO_FLUSH | SPI_TX_FIFO_FLUSH;
+		tegra_spi_writel(tspi, status, SPI_FIFO_STATUS);
+		while ((status & SPI_FIFO_EMPTY) != SPI_FIFO_EMPTY) {
+			status = tegra_spi_readl(tspi, SPI_FIFO_STATUS);
+			if (time_after(jiffies, timeout)) {
+				dev_err(tspi->dev,
+					"timeout waiting for fifo flush\n");
+				return -EIO;
+			}
+
+			udelay(1);
+		}
 	}
 
+	return 0;
+}
+
+static int tegra_spi_start_dma_based_transfer(
+		struct tegra_spi_data *tspi, struct spi_transfer *t)
+{
+	u32 val;
+	unsigned int len;
+	int ret = 0;
+
 	val = SPI_DMA_BLK_SET(tspi->curr_dma_words - 1);
 	tegra_spi_writel(tspi, val, SPI_DMA_BLK);
 
@@ -779,6 +794,9 @@ static int tegra_spi_start_transfer_one(struct spi_device *spi,
 	dev_dbg(tspi->dev, "The def 0x%x and written 0x%x\n",
 		tspi->def_command1_reg, (unsigned)command1);
 
+	ret = tegra_spi_flush_fifos(tspi);
+	if (ret < 0)
+		return ret;
 	if (total_fifo_words > SPI_FIFO_DEPTH)
 		ret = tegra_spi_start_dma_based_transfer(tspi, t);
 	else
@@ -876,6 +894,7 @@ static int tegra_spi_transfer_one_message(struct spi_master *master,
 			    (tspi->cur_direction & DATA_DIR_RX))
 				dmaengine_terminate_all(tspi->rx_dma_chan);
 			ret = -EIO;
+			tegra_spi_flush_fifos(tspi);
 			reset_control_assert(tspi->rst);
 			udelay(2);
 			reset_control_deassert(tspi->rst);
@@ -929,6 +948,7 @@ static irqreturn_t handle_cpu_based_xfer(struct tegra_spi_data *tspi)
 			tspi->status_reg);
 		dev_err(tspi->dev, "CpuXfer 0x%08x:0x%08x\n",
 			tspi->command1_reg, tspi->dma_control_reg);
+		tegra_spi_flush_fifos(tspi);
 		reset_control_assert(tspi->rst);
 		udelay(2);
 		reset_control_deassert(tspi->rst);
@@ -1001,6 +1021,7 @@ static irqreturn_t handle_dma_based_xfer(struct tegra_spi_data *tspi)
 			tspi->status_reg);
 		dev_err(tspi->dev, "DmaXfer 0x%08x:0x%08x\n",
 			tspi->command1_reg, tspi->dma_control_reg);
+		tegra_spi_flush_fifos(tspi);
 		reset_control_assert(tspi->rst);
 		udelay(2);
 		reset_control_deassert(tspi->rst);
-- 
2.20.1

  parent reply	other threads:[~2020-01-16 16:58 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200116170509.12787-1-sashal@kernel.org>
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 266/671] spi: tegra114: clear packed bit for unpacked mode Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 268/671] spi: tegra114: terminate dma and reset on transfer timeout Sasha Levin
     [not found] ` <20200116170509.12787-1-sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2020-01-16 16:58   ` [PATCH AUTOSEL 4.19 267/671] spi: tegra114: fix for unpacked mode transfers Sasha Levin
2020-01-16 16:58   ` Sasha Levin [this message]
2020-01-16 17:00   ` [PATCH AUTOSEL 4.19 370/671] spi: spi-fsl-spi: call spi_finalize_current_message() at the end Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 270/671] spi: tegra114: configure dma burst size to fifo trig level Sasha Levin
2020-01-16 16:58 ` [PATCH AUTOSEL 4.19 274/671] spi: bcm2835aux: fix driver to not allow 65535 (=-1) cs-gpios Sasha Levin
2020-01-16 17:02 ` [PATCH AUTOSEL 4.19 484/671] spi: bcm-qspi: Fix BSPI QUAD and DUAL mode support when using flex mode Sasha Levin
2020-01-16 17:04 ` [PATCH AUTOSEL 4.19 623/671] spi: atmel: fix handling of cs_change set on non-last xfer Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116170509.12787-6-sashal@kernel.org \
    --to=sashal-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).