linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Philippe Schenker <philippe.schenker@toradex.com>,
	Mark Brown <broonie@kernel.org>, Sasha Levin <sashal@kernel.org>,
	linux-spi@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 071/542] spi: fsl-lpspi: fix only one cs-gpio working
Date: Fri, 14 Feb 2020 10:41:03 -0500	[thread overview]
Message-ID: <20200214154854.6746-71-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: Philippe Schenker <philippe.schenker@toradex.com>

[ Upstream commit bc3a8b295e5bca9d1ec2622a6ba38289f9fd3d8a ]

Why it does not work at the moment:
- num_chipselect sets the number of cs-gpios that are in the DT.
  This comes from drivers/spi/spi.c
- num_chipselect gets set with devm_spi_register_controller, that is
  called in drivers/spi/spi.c
- devm_spi_register_controller got called after num_chipselect has
  been used.

How this commit fixes the issue:
- devm_spi_register_controller gets called before num_chipselect is
  being used.

Fixes: c7a402599504 ("spi: lpspi: use the core way to implement cs-gpio function")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Link: https://lore.kernel.org/r/20191204141312.1411251-1-philippe.schenker@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-fsl-lpspi.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 2cc0ddb4a9889..1375bdfc587bf 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -862,6 +862,22 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	fsl_lpspi->dev = &pdev->dev;
 	fsl_lpspi->is_slave = is_slave;
 
+	controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
+	controller->transfer_one = fsl_lpspi_transfer_one;
+	controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
+	controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware;
+	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+	controller->dev.of_node = pdev->dev.of_node;
+	controller->bus_num = pdev->id;
+	controller->slave_abort = fsl_lpspi_slave_abort;
+
+	ret = devm_spi_register_controller(&pdev->dev, controller);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "spi_register_controller error.\n");
+		goto out_controller_put;
+	}
+
 	if (!fsl_lpspi->is_slave) {
 		for (i = 0; i < controller->num_chipselect; i++) {
 			int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
@@ -885,16 +901,6 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 		controller->prepare_message = fsl_lpspi_prepare_message;
 	}
 
-	controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32);
-	controller->transfer_one = fsl_lpspi_transfer_one;
-	controller->prepare_transfer_hardware = lpspi_prepare_xfer_hardware;
-	controller->unprepare_transfer_hardware = lpspi_unprepare_xfer_hardware;
-	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
-	controller->dev.of_node = pdev->dev.of_node;
-	controller->bus_num = pdev->id;
-	controller->slave_abort = fsl_lpspi_slave_abort;
-
 	init_completion(&fsl_lpspi->xfer_done);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -952,12 +958,6 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
 	if (ret < 0)
 		dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret);
 
-	ret = devm_spi_register_controller(&pdev->dev, controller);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "spi_register_controller error.\n");
-		goto out_controller_put;
-	}
-
 	return 0;
 
 out_controller_put:
-- 
2.20.1

       reply	other threads:[~2020-02-14 15:41 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:41 ` Sasha Levin [this message]
2020-02-14 15:47 ` [PATCH AUTOSEL 5.5 428/542] spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-71-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).