From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chuanhong Guo Subject: [PATCH v2 1/4] spi: make spi-max-frequency optional Date: Fri, 28 Feb 2020 12:36:33 +0800 Message-ID: <20200228043636.559915-2-gch981213@gmail.com> References: <20200228043636.559915-1-gch981213@gmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Cc: Chuanhong Guo , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Rob Herring , Matthias Brugger , Mark Brown , Tudor Ambarus , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org (moderated list:ARM/Mediatek SoC support), linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org (open list) To: linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-mtd-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: In-Reply-To: <20200228043636.559915-1-gch981213-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-spi.vger.kernel.org We only need a spi-max-frequency when we specifically request a spi frequency lower than the max speed of spi host. This property is already documented as optional property and current host drivers are implemented to operate at highest speed possible when spi->max_speed_hz is 0. This patch makes spi-max-frequency an optional property so that we could just omit it to use max controller speed. Signed-off-by: Chuanhong Guo --- Change since v1: new commit drivers/spi/spi.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 38b4c78df506..c0c55dc79972 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1955,13 +1955,8 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi, spi->mode |= SPI_CS_HIGH; /* Device speed */ - rc = of_property_read_u32(nc, "spi-max-frequency", &value); - if (rc) { - dev_err(&ctlr->dev, - "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc); - return rc; - } - spi->max_speed_hz = value; + if (!of_property_read_u32(nc, "spi-max-frequency", &value)) + spi->max_speed_hz = value; return 0; } -- 2.24.1