linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	eha-/iRVSOupHO4@public.gmane.org,
	angelo-BIYBQhTR83Y@public.gmane.org,
	andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org,
	weic-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
	mhosny-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
	michael-QKn5cuLxLXY@public.gmane.org,
	peng.ma-3arQi8VN3Tc@public.gmane.org
Subject: [PATCH v3 7/7] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
Date: Tue, 10 Mar 2020 14:55:42 +0200	[thread overview]
Message-ID: <20200310125542.5939-8-olteanv@gmail.com> (raw)
In-Reply-To: <20200310125542.5939-1-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

From: Vladimir Oltean <vladimir.oltean-3arQi8VN3Tc@public.gmane.org>

For debugging, it is useful to have access to the DSPI controller
signals. On the reference design board, these are exported to either the
mikroBUS1 or mikroBUS2 connector (according to the CPLD register
BRDCFG3[SPI3]).

Signed-off-by: Vladimir Oltean <vladimir.oltean-3arQi8VN3Tc@public.gmane.org>
---
Changes in v3:
None.

Changes in v2:
Change compatible string for spidev node.

 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index bb7ba3bcbe56..13555ed52b89 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -83,6 +83,20 @@
 	};
 };
 
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	/* mikroBUS1 */
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <20000000>;
+		fsl,spi-cs-sck-delay = <100>;
+		fsl,spi-sck-cs-delay = <100>;
+		reg = <0>;
+	};
+};
+
 &esdhc {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
-- 
2.17.1

  parent reply	other threads:[~2020-03-10 12:55 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-10 12:55 [PATCH v3 0/7] NXP DSPI bugfixes and support for LS1028A Vladimir Oltean
2020-03-10 12:55 ` [PATCH v3 2/7] spi: spi-fsl-dspi: Avoid use-after-free in interrupt mode Vladimir Oltean
2020-03-10 12:55 ` [PATCH v3 5/7] spi: spi-fsl-dspi: Add support for LS1028A Vladimir Oltean
2020-03-10 12:55 ` [PATCH v3 6/7] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers Vladimir Oltean
     [not found] ` <20200310125542.5939-1-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-10 12:55   ` [PATCH v3 1/7] spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR Vladimir Oltean
2020-03-10 12:55   ` [PATCH v3 3/7] spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA Vladimir Oltean
2020-03-10 12:55   ` [PATCH v3 4/7] spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode Vladimir Oltean
2020-03-10 12:55   ` Vladimir Oltean [this message]
2020-03-10 14:11   ` [PATCH v3 0/7] NXP DSPI bugfixes and support for LS1028A Michael Walle
     [not found]     ` <615284875b709f602d57e4a4621a83c1-QKn5cuLxLXY@public.gmane.org>
2020-03-10 14:56       ` Vladimir Oltean
2020-03-10 15:22         ` Michael Walle
     [not found]           ` <59b07b7d70603c6b536a7354ed0ea8d8-QKn5cuLxLXY@public.gmane.org>
2020-03-13 16:07             ` Michael Walle
2020-03-13 16:37               ` Vladimir Oltean
     [not found]                 ` <CA+h21hqk+pVrGgHx4iTshfE3i4WF7VANPfMf2ykPFpL3=ragag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-13 16:53                   ` Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200310125542.5939-8-olteanv@gmail.com \
    --to=olteanv-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=angelo-BIYBQhTR83Y@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=eha-/iRVSOupHO4@public.gmane.org \
    --cc=gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=mhosny-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=michael-QKn5cuLxLXY@public.gmane.org \
    --cc=peng.ma-3arQi8VN3Tc@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=weic-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).