From: Vladimir Oltean <olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
eha-/iRVSOupHO4@public.gmane.org,
angelo-BIYBQhTR83Y@public.gmane.org,
andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org,
weic-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
mhosny-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
michael-QKn5cuLxLXY@public.gmane.org,
peng.ma-3arQi8VN3Tc@public.gmane.org
Subject: [PATCH v3 09/12] spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message
Date: Sun, 15 Mar 2020 00:43:37 +0200 [thread overview]
Message-ID: <20200314224340.1544-10-olteanv@gmail.com> (raw)
In-Reply-To: <20200314224340.1544-1-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Vladimir Oltean <vladimir.oltean-3arQi8VN3Tc@public.gmane.org>
The operating mode (DMA, XSPI, EOQ) is not going to change across the
lifetime of the device. So it makes no sense to keep writing to SPI_RSER
on each message. Move this configuration to dspi_init instead.
Signed-off-by: Vladimir Oltean <vladimir.oltean-3arQi8VN3Tc@public.gmane.org>
---
Changes in v4:
Patch is new.
drivers/spi/spi-fsl-dspi.c | 55 ++++++++++++++++++++------------------
1 file changed, 29 insertions(+), 26 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index eab4929330e1..86255d38ffcf 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -909,7 +909,6 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
{
struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr);
struct spi_device *spi = message->spi;
- enum dspi_trans_mode trans_mode;
struct spi_transfer *transfer;
int status = 0;
@@ -951,30 +950,11 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
dspi->progress, !dspi->irq);
- trans_mode = dspi->devtype_data->trans_mode;
- switch (trans_mode) {
- case DSPI_EOQ_MODE:
- regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
- dspi_fifo_write(dspi);
- break;
- case DSPI_XSPI_MODE:
- regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
- dspi_fifo_write(dspi);
- break;
- case DSPI_DMA_MODE:
- regmap_write(dspi->regmap, SPI_RSER,
- SPI_RSER_TFFFE | SPI_RSER_TFFFD |
- SPI_RSER_RFDFE | SPI_RSER_RFDFD);
+ if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
status = dspi_dma_xfer(dspi);
- break;
- default:
- dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
- trans_mode);
- status = -EINVAL;
- goto out;
- }
+ } else {
+ dspi_fifo_write(dspi);
- if (trans_mode != DSPI_DMA_MODE) {
if (dspi->irq) {
wait_for_completion(&dspi->xfer_done);
reinit_completion(&dspi->xfer_done);
@@ -984,11 +964,12 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
} while (status == -EINPROGRESS);
}
}
+ if (status)
+ break;
spi_transfer_delay_exec(transfer);
}
-out:
message->status = status;
spi_finalize_current_message(ctlr);
@@ -1179,7 +1160,7 @@ static const struct regmap_config dspi_xspi_regmap_config[] = {
},
};
-static void dspi_init(struct fsl_dspi *dspi)
+static int dspi_init(struct fsl_dspi *dspi)
{
unsigned int mcr;
@@ -1193,6 +1174,26 @@ static void dspi_init(struct fsl_dspi *dspi)
regmap_write(dspi->regmap, SPI_MCR, mcr);
regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
+
+ switch (dspi->devtype_data->trans_mode) {
+ case DSPI_EOQ_MODE:
+ regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
+ break;
+ case DSPI_XSPI_MODE:
+ regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_CMDTCFE);
+ break;
+ case DSPI_DMA_MODE:
+ regmap_write(dspi->regmap, SPI_RSER,
+ SPI_RSER_TFFFE | SPI_RSER_TFFFD |
+ SPI_RSER_RFDFE | SPI_RSER_RFDFD);
+ break;
+ default:
+ dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
+ dspi->devtype_data->trans_mode);
+ return -EINVAL;
+ }
+
+ return 0;
}
static int dspi_slave_abort(struct spi_master *master)
@@ -1348,7 +1349,9 @@ static int dspi_probe(struct platform_device *pdev)
if (ret)
goto out_ctlr_put;
- dspi_init(dspi);
+ ret = dspi_init(dspi);
+ if (ret)
+ goto out_clk_put;
dspi->irq = platform_get_irq(pdev, 0);
if (dspi->irq <= 0) {
--
2.17.1
next prev parent reply other threads:[~2020-03-14 22:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-14 22:43 [PATCH v3 00/12] NXP DSPI bugfixes and support for LS1028A Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 01/12] spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 06/12] spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion Vladimir Oltean
2020-03-16 12:26 ` Mark Brown
[not found] ` <20200316122613.GE5010-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2020-03-16 12:29 ` Vladimir Oltean
[not found] ` <CA+h21hqRV+HmAz4QGyH9ZtcFWzeCKczitcn+mfTdwAC7ZobdDw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-16 12:49 ` Mark Brown
2020-03-16 13:00 ` Vladimir Oltean
[not found] ` <CA+h21hpoHGuDwpOqtWJFO7+0mQVUrmcBLW7nnGq6dt3QU5axfw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-16 13:25 ` Michael Walle
2020-03-16 16:23 ` Vladimir Oltean
[not found] ` <CA+h21hqt7Xe1LrSDsCVS8zqunQp2tKGhmHDraMirxL595go4nA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-03-16 17:15 ` Michael Walle
[not found] ` <8c22cb70b7c0acb6769e0c68540ab523-QKn5cuLxLXY@public.gmane.org>
2020-03-17 11:24 ` Michael Walle
2020-03-14 22:43 ` [PATCH v3 07/12] spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode Vladimir Oltean
[not found] ` <20200314224340.1544-1-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-14 22:43 ` [PATCH v3 02/12] spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 03/12] spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 04/12] spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 05/12] spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight Vladimir Oltean
[not found] ` <20200314224340.1544-6-olteanv-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2020-03-16 12:35 ` Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 08/12] spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path Vladimir Oltean
2020-03-14 22:43 ` Vladimir Oltean [this message]
2020-03-14 22:43 ` [PATCH v3 10/12] spi: spi-fsl-dspi: Add support for LS1028A Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 11/12] arm64: dts: ls1028a: Specify the DMA channels for the DSPI controllers Vladimir Oltean
2020-03-14 22:43 ` [PATCH v3 12/12] arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200314224340.1544-10-olteanv@gmail.com \
--to=olteanv-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=andrew.smirnov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=angelo-BIYBQhTR83Y@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=eha-/iRVSOupHO4@public.gmane.org \
--cc=gustavo-L1vi/lXTdts+Va1GwOuvDg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mhosny-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=michael-QKn5cuLxLXY@public.gmane.org \
--cc=peng.ma-3arQi8VN3Tc@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=weic-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).