Linux-SPI Archive on
 help / color / Atom feed
From: Mark Brown <>
To: Linus Walleij <>
	"Uwe Kleine-König" <>,
	"Anatolij Gustschin" <>,
Subject: Re: [PATCH 1/2] spi: mpc512x-psc: Use the framework .set_cs()
Date: Thu, 30 Jul 2020 11:38:07 +0100
Message-ID: <> (raw)
In-Reply-To: <>

[-- Attachment #1: Type: text/plain, Size: 323 bytes --]

On Wed, Jul 29, 2020 at 11:48:16PM +0200, Linus Walleij wrote:
> The mpc512x-psc is rolling its own chip select control code,
> but the SPI master framework can handle this. It was also
> evaluating the CS status for each transfer but the CS change
> should be per-message not per-transfer.

No, CS change is per transfer.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

      parent reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29 21:48 Linus Walleij
2020-07-29 21:48 ` [PATCH 2/2] spi: mpc512x-psc: Convert to use GPIO descriptors Linus Walleij
2020-07-30 10:38 ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on

Archives are clonable:
	git clone --mirror linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ \
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone