[PATCH] spi: imx: Fix freeing of DMA channels if spi_bitbang_start() fails

[Marek Vasut <marex@denx.de>]

If the SPI controller has has_dmamode = true and spi_bitbang_start() fails
in spi_imx_probe(), then the driver must release the DMA channels acquired
in spi_imx_sdma_init() by calling spi_imx_sdma_exit() in the fail path.

Fixes: f62caccd12c1 ("spi: spi-imx: add DMA support")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Robin Gong <b38343@freescale.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
To: linux-spi@vger.kernel.org
---
 drivers/spi/spi-imx.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 38a5f1304cec..e38e5ad3c706 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1707,7 +1707,7 @@ static int spi_imx_probe(struct platform_device *pdev)
 	ret = spi_bitbang_start(&spi_imx->bitbang);
 	if (ret) {
 		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
-		goto out_runtime_pm_put;
+		goto out_bitbang_start;
 	}
 
 	dev_info(&pdev->dev, "probed\n");
@@ -1717,6 +1717,9 @@ static int spi_imx_probe(struct platform_device *pdev)
 
 	return ret;
 
+out_bitbang_start:
+	if (spi_imx->devtype_data->has_dmamode)
+		spi_imx_sdma_exit(spi_imx);
 out_runtime_pm_put:
 	pm_runtime_dont_use_autosuspend(spi_imx->dev);
 	pm_runtime_put_sync(spi_imx->dev);
-- 
2.28.0