Linux-SPI Archive on lore.kernel.org
 help / color / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Mark Brown <broonie@kernel.org>, Serge Semin <fancer.lancer@gmail.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Lars Povlsen <lars.povlsen@microchip.com>,
	"wuxu . wu" <wuxu.wu@huawei.com>, Feng Tang <feng.tang@intel.com>,
	Rob Herring <robh+dt@kernel.org>, <linux-spi@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v4 16/21] spi: dw: Add generic DW SSI status-check method
Date: Thu, 8 Oct 2020 02:55:05 +0300
Message-ID: <20201007235511.4935-17-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20201007235511.4935-1-Sergey.Semin@baikalelectronics.ru>

The DW SSI errors handling method can be generically implemented for all
types of the transfers: IRQ, DMA and poll-based ones. It will be a
function which checks the overflow/underflow error flags and resets the
controller if any of them is set. In the framework of this commit we make
use of the new method to detect the errors in the IRQ- and DMA-based SPI
transfer execution procedures.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 drivers/spi/spi-dw-core.c | 43 +++++++++++++++++++++++++++++++--------
 drivers/spi/spi-dw-dma.c  | 11 ++--------
 drivers/spi/spi-dw.h      |  1 +
 3 files changed, 37 insertions(+), 18 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 76e323db170f..8480da49a6a1 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -169,23 +169,48 @@ static void dw_reader(struct dw_spi *dws)
 	}
 }
 
-static void int_error_stop(struct dw_spi *dws, const char *msg)
+int dw_spi_check_status(struct dw_spi *dws, bool raw)
 {
-	spi_reset_chip(dws);
+	u32 irq_status;
+	int ret = 0;
+
+	if (raw)
+		irq_status = dw_readl(dws, DW_SPI_RISR);
+	else
+		irq_status = dw_readl(dws, DW_SPI_ISR);
+
+	if (irq_status & SPI_INT_RXOI) {
+		dev_err(&dws->master->dev, "RX FIFO overflow detected\n");
+		ret = -EIO;
+	}
+
+	if (irq_status & SPI_INT_RXUI) {
+		dev_err(&dws->master->dev, "RX FIFO underflow detected\n");
+		ret = -EIO;
+	}
 
-	dev_err(&dws->master->dev, "%s\n", msg);
-	dws->master->cur_msg->status = -EIO;
-	spi_finalize_current_transfer(dws->master);
+	if (irq_status & SPI_INT_TXOI) {
+		dev_err(&dws->master->dev, "TX FIFO overflow detected\n");
+		ret = -EIO;
+	}
+
+	/* Generically handle the erroneous situation */
+	if (ret) {
+		spi_reset_chip(dws);
+		if (dws->master->cur_msg)
+			dws->master->cur_msg->status = ret;
+	}
+
+	return ret;
 }
+EXPORT_SYMBOL_GPL(dw_spi_check_status);
 
 static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws)
 {
 	u16 irq_status = dw_readl(dws, DW_SPI_ISR);
 
-	/* Error handling */
-	if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) {
-		dw_readl(dws, DW_SPI_ICR);
-		int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun");
+	if (dw_spi_check_status(dws, false)) {
+		spi_finalize_current_transfer(dws->master);
 		return IRQ_HANDLED;
 	}
 
diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index 9db119dc5554..1969b09b4f5e 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -144,17 +144,10 @@ static void dw_spi_dma_exit(struct dw_spi *dws)
 
 static irqreturn_t dw_spi_dma_transfer_handler(struct dw_spi *dws)
 {
-	u16 irq_status = dw_readl(dws, DW_SPI_ISR);
+	dw_spi_check_status(dws, false);
 
-	if (!irq_status)
-		return IRQ_NONE;
-
-	dw_readl(dws, DW_SPI_ICR);
-	spi_reset_chip(dws);
-
-	dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__);
-	dws->master->cur_msg->status = -EIO;
 	complete(&dws->dma_completion);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 946065201c9c..5eb98ece2f2a 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -261,6 +261,7 @@ static inline void spi_shutdown_chip(struct dw_spi *dws)
 extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
 extern void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
 				 struct dw_spi_cfg *cfg);
+extern int dw_spi_check_status(struct dw_spi *dws, bool raw);
 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
-- 
2.27.0


  parent reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-07 23:54 [PATCH v4 00/21] spi: dw: Add full Baikal-T1 SPI Controllers support Serge Semin
2020-10-07 23:54 ` [PATCH v4 01/21] spi: dw: Use an explicit set_cs assignment Serge Semin
2020-10-07 23:54 ` [PATCH v4 02/21] spi: dw: Add DWC SSI capability Serge Semin
2020-10-07 23:54 ` [PATCH v4 03/21] spi: dw: Detach SPI device specific CR0 config method Serge Semin
2020-10-07 23:54 ` [PATCH v4 04/21] spi: dw: Update SPI bus speed in a config function Serge Semin
2020-10-07 23:54 ` [PATCH v4 05/21] spi: dw: Simplify the SPI bus speed config procedure Serge Semin
2020-10-07 23:54 ` [PATCH v4 06/21] spi: dw: Update Rx sample delay in the config function Serge Semin
2020-10-07 23:54 ` [PATCH v4 07/21] spi: dw: Add DW SPI controller config structure Serge Semin
2020-10-07 23:54 ` [PATCH v4 08/21] spi: dw: Refactor data IO procedure Serge Semin
2020-10-07 23:54 ` [PATCH v4 09/21] spi: dw: Refactor IRQ-based SPI transfer procedure Serge Semin
2020-10-07 23:54 ` [PATCH v4 10/21] spi: dw: Perform IRQ setup in a dedicated function Serge Semin
2020-10-07 23:55 ` [PATCH v4 11/21] spi: dw: Unmask IRQs after enabling the chip Serge Semin
2020-10-07 23:55 ` [PATCH v4 12/21] spi: dw: Discard chip enabling on DMA setup error Serge Semin
2020-10-07 23:55 ` [PATCH v4 13/21] spi: dw: De-assert chip-select on reset Serge Semin
2020-10-07 23:55 ` [PATCH v4 14/21] spi: dw: Explicitly de-assert CS on SPI transfer completion Serge Semin
2020-10-07 23:55 ` [PATCH v4 15/21] spi: dw: Move num-of retries parameter to the header file Serge Semin
2020-10-07 23:55 ` Serge Semin [this message]
2020-10-07 23:55 ` [PATCH v4 17/21] spi: dw: Add memory operations support Serge Semin
2020-10-07 23:55 ` [PATCH v4 18/21] spi: dw: Introduce max mem-ops SPI bus frequency setting Serge Semin
2020-10-07 23:55 ` [PATCH v4 19/21] spi: dw: Add poll-based SPI transfers support Serge Semin
2020-10-07 23:55 ` [PATCH v4 20/21] dt-bindings: spi: dw: Add Baikal-T1 SPI Controllers Serge Semin
2020-10-07 23:55 ` [PATCH v4 21/21] spi: dw: Add Baikal-T1 SPI Controller glue driver Serge Semin
2020-10-08 22:02 ` [PATCH v4 00/21] spi: dw: Add full Baikal-T1 SPI Controllers support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201007235511.4935-17-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Ramil.Zaripov@baikalelectronics.ru \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=feng.tang@intel.com \
    --cc=lars.povlsen@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wuxu.wu@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-spi/0 linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ https://lore.kernel.org/linux-spi \
		linux-spi@vger.kernel.org
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-spi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git