Linux-SPI Archive on lore.kernel.org
 help / color / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Mark Brown <broonie@kernel.org>, Serge Semin <fancer.lancer@gmail.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Lars Povlsen <lars.povlsen@microchip.com>,
	"wuxu . wu" <wuxu.wu@huawei.com>, Feng Tang <feng.tang@intel.com>,
	Rob Herring <robh+dt@kernel.org>, <linux-spi@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v4 07/21] spi: dw: Add DW SPI controller config structure
Date: Thu, 8 Oct 2020 02:54:56 +0300
Message-ID: <20201007235511.4935-8-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20201007235511.4935-1-Sergey.Semin@baikalelectronics.ru>

DW APB SSI controller can be used by the two SPI core interfaces:
traditional SPI transfers and SPI memory operations. The controller needs
to be accordingly configured at runtime when the corresponding operations
are executed. In order to do that for the both interfaces from a single
function we introduce a new data wrapper for the transfer mode, data
width, number of data frames (for the automatic data transfer) and the bus
frequency. It will be used by the update_config() method to tune the DW
APB SSI up.

The update_config() method is made exported to be used not only by the DW
SPI core driver, but by the glue layer drivers too. This will be required
in a coming further commit.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 drivers/spi/spi-dw-core.c | 29 +++++++++++++++++------------
 drivers/spi/spi-dw.h      | 10 ++++++++++
 2 files changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 12080ea2ad84..01ab743bf177 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -20,10 +20,8 @@
 #include <linux/debugfs.h>
 #endif
 
-/* Slave spi_dev related */
+/* Slave spi_device related */
 struct chip_data {
-	u8 tmode;		/* TR/TO/RO/EEPROM */
-
 	u32 cr0;
 	u32 rx_sample_dly;	/* RX sample delay */
 };
@@ -266,8 +264,8 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi)
 	return cr0;
 }
 
-static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
-				 struct spi_transfer *transfer)
+void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
+			  struct dw_spi_cfg *cfg)
 {
 	struct chip_data *chip = spi_get_ctldata(spi);
 	u32 cr0 = chip->cr0;
@@ -275,19 +273,22 @@ static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
 	u16 clk_div;
 
 	/* CTRLR0[ 4/3: 0] Data Frame Size */
-	cr0 |= (transfer->bits_per_word - 1);
+	cr0 |= (cfg->dfs - 1);
 
 	if (!(dws->caps & DW_SPI_CAP_DWC_SSI))
 		/* CTRLR0[ 9:8] Transfer Mode */
-		cr0 |= chip->tmode << SPI_TMOD_OFFSET;
+		cr0 |= cfg->tmode << SPI_TMOD_OFFSET;
 	else
 		/* CTRLR0[11:10] Transfer Mode */
-		cr0 |= chip->tmode << DWC_SSI_CTRLR0_TMOD_OFFSET;
+		cr0 |= cfg->tmode << DWC_SSI_CTRLR0_TMOD_OFFSET;
 
 	dw_writel(dws, DW_SPI_CTRLR0, cr0);
 
+	if (cfg->tmode == SPI_TMOD_EPROMREAD || cfg->tmode == SPI_TMOD_RO)
+		dw_writel(dws, DW_SPI_CTRLR1, cfg->ndf ? cfg->ndf - 1 : 0);
+
 	/* Note DW APB SSI clock divider doesn't support odd numbers */
-	clk_div = (DIV_ROUND_UP(dws->max_freq, transfer->speed_hz) + 1) & 0xfffe;
+	clk_div = (DIV_ROUND_UP(dws->max_freq, cfg->freq) + 1) & 0xfffe;
 	speed_hz = dws->max_freq / clk_div;
 
 	if (dws->current_freq != speed_hz) {
@@ -301,11 +302,17 @@ static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
 		dws->cur_rx_sample_dly = chip->rx_sample_dly;
 	}
 }
+EXPORT_SYMBOL_GPL(dw_spi_update_config);
 
 static int dw_spi_transfer_one(struct spi_controller *master,
 		struct spi_device *spi, struct spi_transfer *transfer)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(master);
+	struct dw_spi_cfg cfg = {
+		.tmode = SPI_TMOD_TR,
+		.dfs = transfer->bits_per_word,
+		.freq = transfer->speed_hz,
+	};
 	u8 imask = 0;
 	u16 txlevel = 0;
 	int ret;
@@ -323,7 +330,7 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 
 	spi_enable_chip(dws, 0);
 
-	dw_spi_update_config(dws, spi, transfer);
+	dw_spi_update_config(dws, spi, &cfg);
 
 	transfer->effective_speed_hz = dws->current_freq;
 
@@ -409,8 +416,6 @@ static int dw_spi_setup(struct spi_device *spi)
 	 */
 	chip->cr0 = dw_spi_prepare_cr0(dws, spi);
 
-	chip->tmode = SPI_TMOD_TR;
-
 	return 0;
 }
 
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index c02351cf2f99..2a2346438564 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -111,6 +111,14 @@ enum dw_ssi_type {
 #define DW_SPI_CAP_KEEMBAY_MST		BIT(1)
 #define DW_SPI_CAP_DWC_SSI		BIT(2)
 
+/* Slave spi_transfer/spi_mem_op related */
+struct dw_spi_cfg {
+	u8 tmode;
+	u8 dfs;
+	u32 ndf;
+	u32 freq;
+};
+
 struct dw_spi;
 struct dw_spi_dma_ops {
 	int (*dma_init)(struct device *dev, struct dw_spi *dws);
@@ -249,6 +257,8 @@ static inline void spi_shutdown_chip(struct dw_spi *dws)
 }
 
 extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
+extern void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
+				 struct dw_spi_cfg *cfg);
 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
-- 
2.27.0


  parent reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-07 23:54 [PATCH v4 00/21] spi: dw: Add full Baikal-T1 SPI Controllers support Serge Semin
2020-10-07 23:54 ` [PATCH v4 01/21] spi: dw: Use an explicit set_cs assignment Serge Semin
2020-10-07 23:54 ` [PATCH v4 02/21] spi: dw: Add DWC SSI capability Serge Semin
2020-10-07 23:54 ` [PATCH v4 03/21] spi: dw: Detach SPI device specific CR0 config method Serge Semin
2020-10-07 23:54 ` [PATCH v4 04/21] spi: dw: Update SPI bus speed in a config function Serge Semin
2020-10-07 23:54 ` [PATCH v4 05/21] spi: dw: Simplify the SPI bus speed config procedure Serge Semin
2020-10-07 23:54 ` [PATCH v4 06/21] spi: dw: Update Rx sample delay in the config function Serge Semin
2020-10-07 23:54 ` Serge Semin [this message]
2020-10-07 23:54 ` [PATCH v4 08/21] spi: dw: Refactor data IO procedure Serge Semin
2020-10-07 23:54 ` [PATCH v4 09/21] spi: dw: Refactor IRQ-based SPI transfer procedure Serge Semin
2020-10-07 23:54 ` [PATCH v4 10/21] spi: dw: Perform IRQ setup in a dedicated function Serge Semin
2020-10-07 23:55 ` [PATCH v4 11/21] spi: dw: Unmask IRQs after enabling the chip Serge Semin
2020-10-07 23:55 ` [PATCH v4 12/21] spi: dw: Discard chip enabling on DMA setup error Serge Semin
2020-10-07 23:55 ` [PATCH v4 13/21] spi: dw: De-assert chip-select on reset Serge Semin
2020-10-07 23:55 ` [PATCH v4 14/21] spi: dw: Explicitly de-assert CS on SPI transfer completion Serge Semin
2020-10-07 23:55 ` [PATCH v4 15/21] spi: dw: Move num-of retries parameter to the header file Serge Semin
2020-10-07 23:55 ` [PATCH v4 16/21] spi: dw: Add generic DW SSI status-check method Serge Semin
2020-10-07 23:55 ` [PATCH v4 17/21] spi: dw: Add memory operations support Serge Semin
2020-10-07 23:55 ` [PATCH v4 18/21] spi: dw: Introduce max mem-ops SPI bus frequency setting Serge Semin
2020-10-07 23:55 ` [PATCH v4 19/21] spi: dw: Add poll-based SPI transfers support Serge Semin
2020-10-07 23:55 ` [PATCH v4 20/21] dt-bindings: spi: dw: Add Baikal-T1 SPI Controllers Serge Semin
2020-10-07 23:55 ` [PATCH v4 21/21] spi: dw: Add Baikal-T1 SPI Controller glue driver Serge Semin
2020-10-08 22:02 ` [PATCH v4 00/21] spi: dw: Add full Baikal-T1 SPI Controllers support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201007235511.4935-8-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Ramil.Zaripov@baikalelectronics.ru \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=feng.tang@intel.com \
    --cc=lars.povlsen@microchip.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wuxu.wu@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-spi/0 linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ https://lore.kernel.org/linux-spi \
		linux-spi@vger.kernel.org
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-spi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git