[PATCH v2 0/6] spi: cadence-quadspi: Add QSPI controller support for Intel LGM SoC

[PATCH v2 0/6] spi: cadence-quadspi: Add QSPI controller support for Intel LGM SoC

[Ramuthevar,Vadivel MuruganX]

Add QSPI controller support for Intel LGM SoC.

Note from Vignesh(mtd subsystem maintainer):
This series is a subset of "[PATCH v12 0/4] spi: cadence-quadspi: Add
support for the Cadence QSPI controller" by Ramuthevar,Vadivel MuruganX
<vadivel.muruganx.ramuthevar@linux.intel.com> that intended to move
cadence-quadspi driver to spi-mem framework

Those patches were trying to accomplish too many things in a single set
of patches and need to split into smaller patches. This is reduced
version of above series.

Changes that are intended to make migration easy are split into separate
patches. Patches 1 to 3 drop features that cannot be supported under
spi-mem at the moment (backward compatibility is maintained).
Patch 4-5 are trivial cleanups. Patch 6 does the actual conversion to
spi-mem and patch 7 moves the driver to drivers/spi folder.

I have tested both INDAC mode (used by non TI platforms like Altera
SoCFPGA) and DAC mode (used by TI platforms) on TI EVMs.

Patches to move move bindings over to
"Documentation/devicetree/bindings/spi/" directory and also conversion
of bindig doc to YAML will be posted separately.  Support for Intel
platform would follow that.

Reference:
        https://lkml.org/lkml/2020/6/1/50

---
v2:
  - Rob's review comments update for dt-bindings
  - add 'oneOf' for compatible selection
  - drop un-neccessary descriptions
  - add the cdns,is-decoded-cs and cdns,rclk-en properties as schema
  - remove 'allOf' in not required place
  - add AdditionalProperties false
  - add minItems/maxItems for qspi reset attributes

resend-v1:
  - As per Mark's suggestion , reorder the patch series 1-3 driver
    support patches, series 4-6 dt-bindings patches.
v1:
  - initial version

Ramuthevar Vadivel Murugan (6):
  spi: cadence-quadspi: Disable the DAC for Intel LGM SoC
  spi: cadence-quadspi: Add multi-chipselect support for Intel LGM SoC
  spi: Move cadence-quadspi.txt to Documentation/devicetree/bindings/spi
  dt-bindings: spi: Convert cadence-quadspi.txt to cadence-quadspi.yaml
  dt-bindings: spi: Add compatible for Intel LGM SoC
  dt-bindings: spi: Add compatible for Intel LGM SoC

 .../devicetree/bindings/mtd/cadence-quadspi.txt    |  67 ---------
 .../devicetree/bindings/spi/cadence-quadspi.yaml   | 149 +++++++++++++++++++++
 drivers/spi/spi-cadence-quadspi.c                  |  26 ++++
 3 files changed, 175 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml

-- 
2.11.0

[PATCH v2 1/6] spi: cadence-quadspi: Disable the DAC for Intel LGM SoC

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

On Intel Lightning Mountain(LGM) SoCs QSPI controller do not use
Direct Access Controller(DAC).

This patch adds a quirk to disable the Direct Access Controller
for data transfer instead it uses indirect data transfer.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 drivers/spi/spi-cadence-quadspi.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index d7b10c46fa70..3d017b484114 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -1106,6 +1106,13 @@ static void cqspi_controller_init(struct cqspi_st *cqspi)
 	reg |= CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL;
 	writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
 
+	/* Disable direct access controller */
+	if (!cqspi->use_direct_mode) {
+		reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
+		reg &= ~CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL;
+		writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
+	}
+
 	cqspi_controller_enable(cqspi, 1);
 }
 
@@ -1388,6 +1395,10 @@ static const struct cqspi_driver_platdata am654_ospi = {
 	.quirks = CQSPI_NEEDS_WR_DELAY,
 };
 
+static const struct cqspi_driver_platdata intel_lgm_qspi = {
+	.quirks = CQSPI_DISABLE_DAC_MODE,
+};
+
 static const struct of_device_id cqspi_dt_ids[] = {
 	{
 		.compatible = "cdns,qspi-nor",
@@ -1403,6 +1414,7 @@ static const struct of_device_id cqspi_dt_ids[] = {
 	},
 	{
 		.compatible = "intel,lgm-qspi",
+		.data = &intel_lgm_qspi,
 	},
 	{ /* end of table */ }
 };
-- 
2.11.0

[PATCH v2 2/6] spi: cadence-quadspi: Add multi-chipselect support for Intel LGM SoC

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add multiple chipselect support for Intel LGM SoCs,
currently QSPI-NOR and QSPI-NAND supported.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 drivers/spi/spi-cadence-quadspi.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c
index 3d017b484114..3bf6d3697631 100644
--- a/drivers/spi/spi-cadence-quadspi.c
+++ b/drivers/spi/spi-cadence-quadspi.c
@@ -38,6 +38,7 @@
 
 /* Capabilities */
 #define CQSPI_SUPPORTS_OCTAL		BIT(0)
+#define CQSPI_SUPPORTS_MULTI_CHIPSELECT BIT(1)
 
 struct cqspi_st;
 
@@ -75,6 +76,7 @@ struct cqspi_st {
 	bool			is_decoded_cs;
 	u32			fifo_depth;
 	u32			fifo_width;
+	u32			num_chipselect;
 	bool			rclk_en;
 	u32			trigger_address;
 	u32			wr_delay;
@@ -1070,6 +1072,14 @@ static int cqspi_of_get_pdata(struct cqspi_st *cqspi)
 		return -ENXIO;
 	}
 
+	if (!cqspi->use_direct_mode) {
+		if (of_property_read_u32(np, "num-chipselect",
+					 &cqspi->num_chipselect)) {
+			dev_err(dev, "couldn't determine number of cs\n");
+			return -ENXIO;
+		}
+	}
+
 	cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en");
 
 	return 0;
@@ -1307,6 +1317,9 @@ static int cqspi_probe(struct platform_device *pdev)
 	cqspi->current_cs = -1;
 	cqspi->sclk = 0;
 
+	if (ddata->hwcaps_mask & CQSPI_SUPPORTS_MULTI_CHIPSELECT)
+		master->num_chipselect = cqspi->num_chipselect;
+
 	ret = cqspi_setup_flash(cqspi);
 	if (ret) {
 		dev_err(dev, "failed to setup flash parameters %d\n", ret);
@@ -1396,6 +1409,7 @@ static const struct cqspi_driver_platdata am654_ospi = {
 };
 
 static const struct cqspi_driver_platdata intel_lgm_qspi = {
+	.hwcaps_mask = CQSPI_SUPPORTS_MULTI_CHIPSELECT,
 	.quirks = CQSPI_DISABLE_DAC_MODE,
 };
 
-- 
2.11.0

[PATCH v2 3/6] spi: Move cadence-quadspi.txt to Documentation/devicetree/bindings/spi

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Move the Documentation/devicetree/bindings/mtd/cadence-quadspi.txt to
Documentation/devicetree/bindings/spi/

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 Documentation/devicetree/bindings/{mtd => spi}/cadence-quadspi.txt | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename Documentation/devicetree/bindings/{mtd => spi}/cadence-quadspi.txt (100%)

diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
similarity index 100%
rename from Documentation/devicetree/bindings/mtd/cadence-quadspi.txt
rename to Documentation/devicetree/bindings/spi/cadence-quadspi.txt
-- 
2.11.0

[PATCH v2 4/6] dt-bindings: spi: Convert cadence-quadspi.txt to cadence-quadspi.yaml

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Convert the cadence-quadspi.txt documentation to cadence-quadspi.yaml
remove the cadence-quadspi.txt from Documentation/devicetree/bindings/spi/

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/spi/cadence-quadspi.txt    |  67 ----------
 .../devicetree/bindings/spi/cadence-quadspi.yaml   | 148 +++++++++++++++++++++
 2 files changed, 148 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.txt
 create mode 100644 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml

diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
deleted file mode 100644
index 945be7d5b236..000000000000
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Cadence Quad SPI controller
-
-Required properties:
-- compatible : should be one of the following:
-	Generic default - "cdns,qspi-nor".
-	For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
-	For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
-- reg : Contains two entries, each of which is a tuple consisting of a
-	physical address and length. The first entry is the address and
-	length of the controller register set. The second entry is the
-	address and length of the QSPI Controller data area.
-- interrupts : Unit interrupt specifier for the controller interrupt.
-- clocks : phandle to the Quad SPI clock.
-- cdns,fifo-depth : Size of the data FIFO in words.
-- cdns,fifo-width : Bus width of the data FIFO in bytes.
-- cdns,trigger-address : 32-bit indirect AHB trigger address.
-
-Optional properties:
-- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
-- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch
-  the read data rather than the QSPI clock. Make sure that QSPI return
-  clock is populated on the board before using this property.
-
-Optional subnodes:
-Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
-custom properties:
-- cdns,read-delay : Delay for read capture logic, in clock cycles
-- cdns,tshsl-ns : Delay in nanoseconds for the length that the master
-                  mode chip select outputs are de-asserted between
-		  transactions.
-- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being
-                  de-activated and the activation of another.
-- cdns,tchsh-ns : Delay in nanoseconds between last bit of current
-                  transaction and deasserting the device chip select
-		  (qspi_n_ss_out).
-- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
-                  and first bit transfer.
-- resets	: Must contain an entry for each entry in reset-names.
-		  See ../reset/reset.txt for details.
-- reset-names	: Must include either "qspi" and/or "qspi-ocp".
-
-Example:
-
-	qspi: spi@ff705000 {
-		compatible = "cdns,qspi-nor";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xff705000 0x1000>,
-		      <0xffa00000 0x1000>;
-		interrupts = <0 151 4>;
-		clocks = <&qspi_clk>;
-		cdns,is-decoded-cs;
-		cdns,fifo-depth = <128>;
-		cdns,fifo-width = <4>;
-		cdns,trigger-address = <0x00000000>;
-		resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>;
-		reset-names = "qspi", "qspi-ocp";
-
-		flash0: n25q00@0 {
-			...
-			cdns,read-delay = <4>;
-			cdns,tshsl-ns = <50>;
-			cdns,tsd2d-ns = <50>;
-			cdns,tchsh-ns = <4>;
-			cdns,tslch-ns = <4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
new file mode 100644
index 000000000000..6ed8122a1326
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/cadence-quadspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence Quad SPI controller
+
+maintainers:
+  - Vadivel Murugan <vadivel.muruganx.ramuthevar@intel.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - const: cdns,qspi-nor
+      - const: ti,k2g-qspi, cdns,qspi-nor
+      - const: ti,am654-ospi, cdns,qspi-nor
+
+    description:
+      Should be one of the above supported compatible strings.
+      optional properties
+      "cdns,is-decoded-cs" - Flag to indicate whether decoder is used or not.
+      "cdns,rclk-en" - Flag to indicate that QSPI return clock is used to latch
+      the read data rather than the QSPI clock. Make sure that QSPI return
+      clock is populated on the board before using this property.
+
+  reg:
+    maxItems: 2
+
+    description:
+      Contains two entries, each of which is a tuple consisting of a
+      physical address and length. The first entry is the address and
+      length of the controller register set. The second entry is the
+      address and length of the QSPI Controller data area.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Unit interrupt specifier for the controller interrupt.
+
+  clocks:
+    maxItems: 1
+    description:
+      phandle to the Quad SPI clock.
+
+  cdns,fifo-depth:
+    description:
+      Size of the data FIFO in words.
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/uint32"
+      - enum: [ 128, 256 ]
+      - default: 128
+
+  cdns,fifo-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bus width of the data FIFO in bytes.
+    multipleOf: 4
+
+  cdns,trigger-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      32-bit indirect AHB trigger address.
+
+  resets:
+     description:
+       Must contain an entry for each entry in reset-names.
+       See ../reset/reset.txt for details.
+
+  reset-names:
+    description:
+      Must include either "qspi" and/or "qspi-ocp".
+
+# subnode's properties
+patternProperties:
+  "@[0-9a-f]+$":
+    type: object
+    description:
+      flash device uses the subnodes below defined properties.
+
+  cdns,read-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay for read capture logic, in clock cycles.
+
+  cdns,tshsl-ns:
+    description: |
+      Delay in nanoseconds for the length that the master mode chip select
+      outputs are de-asserted between transactions.
+
+  cdns,tsd2d-ns:
+    description: |
+      Delay in nanoseconds between one chip select being de-activated
+      and the activation of another.
+
+  cdns,tchsh-ns:
+    description: |
+      Delay in nanoseconds between last bit of current transaction and
+      deasserting the device chip select (qspi_n_ss_out).
+
+  cdns,tslch-ns:
+    description: |
+      Delay in nanoseconds between setting qspi_n_ss_out low and
+      first bit transfer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - cdns,fifo-depth
+  - cdns,fifo-width
+  - cdns,trigger-address
+  - resets
+  - reset-names
+
+examples:
+  - |
+    qspi: spi@ff705000 {
+      compatible = "cadence,qspi";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      reg = <0xff705000 0x1000>,
+            <0xffa00000 0x1000>;
+      interrupts = <0 151 4>;
+      clocks = <&qspi_clk>;
+      cdns,fifo-depth = <128>;
+      cdns,fifo-width = <4>;
+      cdns,trigger-address = <0x00000000>;
+      resets = <&rst 0x1>, <&rst 0x2>;
+      reset-names = "qspi", "qspi-ocp";
+
+      flash@0 {
+              compatible = "jedec,spi-nor";
+              reg = <0x0>;
+              cdns,read-delay = <4>;
+              cdns,tshsl-ns = <50>;
+              cdns,tsd2d-ns = <50>;
+              cdns,tchsh-ns = <4>;
+              cdns,tslch-ns = <4>;
+     };
+
+    };
+
+...
-- 
2.11.0

[PATCH v2 5/6] dt-bindings: spi: Add compatible for Intel LGM SoC

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add compatible string for Intel LGM SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 .../devicetree/bindings/spi/cadence-quadspi.yaml   | 68 +++++++++++-----------
 1 file changed, 34 insertions(+), 34 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
index 6ed8122a1326..57be1a730e7b 100644
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
@@ -14,65 +14,61 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - const: cdns,qspi-nor
-      - const: ti,k2g-qspi, cdns,qspi-nor
-      - const: ti,am654-ospi, cdns,qspi-nor
-
-    description:
-      Should be one of the above supported compatible strings.
-      optional properties
-      "cdns,is-decoded-cs" - Flag to indicate whether decoder is used or not.
-      "cdns,rclk-en" - Flag to indicate that QSPI return clock is used to latch
-      the read data rather than the QSPI clock. Make sure that QSPI return
-      clock is populated on the board before using this property.
+    oneOf:
+      - items:
+         - const: cdns,qspi-nor
+         - const: ti,k2g-qspi, cdns,qspi-nor
+         - const: ti,am654-ospi, cdns,qspi-nor
 
   reg:
-    maxItems: 2
-    
-    description:
-      Contains two entries, each of which is a tuple consisting of a
-      physical address and length. The first entry is the address and
-      length of the controller register set. The second entry is the
-      address and length of the QSPI Controller data area.
+    items:
+      - description: the controller register set
+      - description: the controller data area
 
   interrupts:
     maxItems: 1
-    description:
-      Unit interrupt specifier for the controller interrupt.
 
   clocks:
     maxItems: 1
-    description:
-      phandle to the Quad SPI clock.
 
   cdns,fifo-depth:
     description:
       Size of the data FIFO in words.
-    allOf:
-      - $ref: "/schemas/types.yaml#/definitions/uint32"
-      - enum: [ 128, 256 ]
-      - default: 128
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    enum: [ 128, 256 ]
+    default: 128
 
   cdns,fifo-width:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Bus width of the data FIFO in bytes.
-    multipleOf: 4
+    default: 4
 
   cdns,trigger-address:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
       32-bit indirect AHB trigger address.
 
+  cdns,is-decoded-cs:
+    type: boolean
+    description:
+      Flag to indicate whether decoder is used or not.
+
+  cdns,rclk-en:
+    type: boolean
+    description:
+      Flag to indicate that QSPI return clock is used to latch the read
+      data rather than the QSPI clock. Make sure that QSPI return clock
+      is populated on the board before using this property.
+
   resets:
-     description:
-       Must contain an entry for each entry in reset-names.
-       See ../reset/reset.txt for details.
+    maxItems : 2
 
   reset-names:
-    description:
-      Must include either "qspi" and/or "qspi-ocp".
+    minItems: 1
+    maxItems: 2
+    items:
+      enum: [ qspi, qspi-ocp ]
 
 # subnode's properties
 patternProperties:
@@ -114,13 +110,17 @@ required:
   - cdns,fifo-depth
   - cdns,fifo-width
   - cdns,trigger-address
+  - cdns,is-decoded-cs
+  - cdns,rclk-en
   - resets
   - reset-names
 
+additionalProperties: false
+
 examples:
   - |
     qspi: spi@ff705000 {
-      compatible = "cadence,qspi";
+      compatible = "cadence,qspi","cdns,qpsi-nor";
       #address-cells = <1>;
       #size-cells = <0>;
       reg = <0xff705000 0x1000>,
-- 
2.11.0

[PATCH v2 6/6] dt-bindings: spi: Add compatible for Intel LGM SoC

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add compatible string for Intel LGM SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
index 57be1a730e7b..44378d2d2b9e 100644
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
@@ -19,6 +19,7 @@ properties:
          - const: cdns,qspi-nor
          - const: ti,k2g-qspi, cdns,qspi-nor
          - const: ti,am654-ospi, cdns,qspi-nor
+         - const: intel,lgm-qspi, cdns,qspi-nor
 
   reg:
     items:
-- 
2.11.0

[PATCH v2 6/6] dt-bindings: spi: Add compatible for Intel LGM SoC

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>

Add compatible string for Intel LGM SoC.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
---
 Documentation/devicetree/bindings/spi/cadence-quadspi.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
index 57be1a730e7b..44378d2d2b9e 100644
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.yaml
@@ -19,6 +19,7 @@ properties:
          - const: cdns,qspi-nor
          - const: ti,k2g-qspi, cdns,qspi-nor
          - const: ti,am654-ospi, cdns,qspi-nor
+         - const: intel,lgm-qspi, cdns,qspi-nor
 
   reg:
     items:
-- 
2.11.0