Linux-SPI Archive on
 help / color / Atom feed
From: Rasmus Villemoes <>
To: Mark Brown <>,
	Christophe Leroy <>
Cc: Rasmus Villemoes <>,,,
Subject: [PATCH] spi: fsl: invert spisel_boot signal on MPC8309
Date: Sat, 30 Jan 2021 15:35:45 +0100
Message-ID: <> (raw)

Commit 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH
is not set in spi->mode") broke our MPC8309 board by effectively
inverting the boolean value passed to fsl_spi_cs_control. The
SPISEL_BOOT signal is used as chipselect, but it's not a gpio, so
we cannot rely on gpiolib handling the polarity.

Adapt to the new world order by inverting the logic here. This does
assume that the slave sitting at the SPISEL_BOOT is active low, but
should that ever turn out not to be the case, one can create a stub
gpiochip driver controlling a single gpio (or rather, a single "spo",
special-purpose output).

Fixes: 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode")
Signed-off-by: Rasmus Villemoes <>
 drivers/spi/spi-fsl-spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 6d8e0a05a535..e4a8d203f940 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -695,7 +695,7 @@ static void fsl_spi_cs_control(struct spi_device *spi, bool on)
 		if (WARN_ON_ONCE(!pinfo->immr_spi_cs))
-		iowrite32be(on ? SPI_BOOT_SEL_BIT : 0, pinfo->immr_spi_cs);
+		iowrite32be(on ? 0 : SPI_BOOT_SEL_BIT, pinfo->immr_spi_cs);

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-30 14:35 Rasmus Villemoes [this message]
2021-02-01 16:46 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on

Archives are clonable:
	git clone --mirror linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ \
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone