linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-clk@vger.kernel.org,
	kernel@pengutronix.de
Subject: [PATCH] spi: davinci: Simplify using devm_clk_get_prepared()
Date: Wed, 24 Mar 2021 21:17:23 +0100	[thread overview]
Message-ID: <20210324201723.76299-1-u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <20210301135053.1462168-1-u.kleine-koenig@pengutronix.de>

devm_clk_get_prepared returns the clk already prepared and the
automatically called cleanup cares for unpreparing. So simplify .probe
and .remove accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
Hello,

this simplification depends on a patch set that introduces
devm_clk_get_prepared() and friends.

The most recent version of this patch set can be found at

	https://lore.kernel.org/r/20210301135053.1462168-1-u.kleine-koenig@pengutronix.de

Unfortunately I didn't get any feedback at all from the clk maintainers
on it, so I try to make other maintainers aware of it in the expectation
that the simplifications are welcome and so lure the clk maintainers to
share their thoughts.

Best regards
Uwe

 drivers/spi/spi-davinci.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 7453a1dbbc06..c170bccf9710 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -936,14 +936,11 @@ static int davinci_spi_probe(struct platform_device *pdev)
 
 	dspi->bitbang.master = master;
 
-	dspi->clk = devm_clk_get(&pdev->dev, NULL);
+	dspi->clk = devm_clk_get_prepared(&pdev->dev, NULL);
 	if (IS_ERR(dspi->clk)) {
 		ret = -ENODEV;
 		goto free_master;
 	}
-	ret = clk_prepare_enable(dspi->clk);
-	if (ret)
-		goto free_master;
 
 	master->use_gpio_descriptors = true;
 	master->dev.of_node = pdev->dev.of_node;
@@ -968,7 +965,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 
 	ret = davinci_spi_request_dma(dspi);
 	if (ret == -EPROBE_DEFER) {
-		goto free_clk;
+		goto free_master;
 	} else if (ret) {
 		dev_info(&pdev->dev, "DMA is not supported (%d)\n", ret);
 		dspi->dma_rx = NULL;
@@ -1012,8 +1009,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		dma_release_channel(dspi->dma_rx);
 		dma_release_channel(dspi->dma_tx);
 	}
-free_clk:
-	clk_disable_unprepare(dspi->clk);
 free_master:
 	spi_master_put(master);
 err:
@@ -1039,8 +1034,6 @@ static int davinci_spi_remove(struct platform_device *pdev)
 
 	spi_bitbang_stop(&dspi->bitbang);
 
-	clk_disable_unprepare(dspi->clk);
-
 	if (dspi->dma_rx) {
 		dma_release_channel(dspi->dma_rx);
 		dma_release_channel(dspi->dma_tx);
-- 
2.30.2


       reply	other threads:[~2021-03-24 20:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210301135053.1462168-1-u.kleine-koenig@pengutronix.de>
2021-03-24 20:17 ` Uwe Kleine-König [this message]
2021-03-24 20:22   ` [PATCH] spi: davinci: Simplify using devm_clk_get_prepared() Uwe Kleine-König
2021-03-30 17:04     ` Mark Brown
2021-03-30  4:09   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210324201723.76299-1-u.kleine-koenig@pengutronix.de \
    --to=u.kleine-koenig@pengutronix.de \
    --cc=broonie@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).