Linux-SPI Archive on lore.kernel.org
 help / color / Atom feed
From: quanyang.wang@windriver.com
To: Mark Brown <broonie@kernel.org>,
	Michal Simek <michal.simek@xilinx.com>,
	Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Cc: linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Quanyang Wang <quanyang.wang@windriver.com>
Subject: [PATCH 1/5] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue
Date: Fri, 16 Apr 2021 08:46:48 +0800
Message-ID: <20210416004652.2975446-2-quanyang.wang@windriver.com> (raw)
In-Reply-To: <20210416004652.2975446-1-quanyang.wang@windriver.com>

From: Quanyang Wang <quanyang.wang@windriver.com>

The clks "pclk" and "ref_clk" are enabled twice during the probe. The
first time is in the function zynqmp_qspi_probe and the second time is
in zynqmp_qspi_setup_op which is called by devm_spi_register_controller.
Then calling zynqmp_qspi_remove (rmmod this module) to disable these clks
will trigger a warning as below:

[  309.124604] Unpreparing enabled qspi_ref
[  309.128641] WARNING: CPU: 1 PID: 537 at drivers/clk/clk.c:824 clk_core_unprepare+0x108/0x110

Since pm_runtime works now, clks can be enabled/disabled by calling
zynqmp_runtime_suspend/resume. So we don't need to enable these clks
explicitly in zynqmp_qspi_setup_op. Remove them to fix this issue.

And remove clk enabling/disabling in zynqmp_qspi_resume because there is
no spi transfer operation so enabling ref_clk is redundant meanwhile pclk
is not disabled for it is shared with other peripherals.

Furthermore replace clk_enable/disable with clk_prepare_enable and
clk_disable_unprepare in runtime_suspend/resume functions.

Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
---
 drivers/spi/spi-zynqmp-gqspi.c | 47 ++++++----------------------------
 1 file changed, 8 insertions(+), 39 deletions(-)

diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
index 32e53f379e9b..f9056f0a480c 100644
--- a/drivers/spi/spi-zynqmp-gqspi.c
+++ b/drivers/spi/spi-zynqmp-gqspi.c
@@ -487,24 +487,10 @@ static int zynqmp_qspi_setup_op(struct spi_device *qspi)
 {
 	struct spi_controller *ctlr = qspi->master;
 	struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
-	struct device *dev = &ctlr->dev;
-	int ret;
 
 	if (ctlr->busy)
 		return -EBUSY;
 
-	ret = clk_enable(xqspi->refclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable device clock.\n");
-		return ret;
-	}
-
-	ret = clk_enable(xqspi->pclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable APB clock.\n");
-		clk_disable(xqspi->refclk);
-		return ret;
-	}
 	zynqmp_gqspi_write(xqspi, GQSPI_EN_OFST, GQSPI_EN_MASK);
 
 	return 0;
@@ -863,26 +849,9 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
 static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
 {
 	struct spi_controller *ctlr = dev_get_drvdata(dev);
-	struct zynqmp_qspi *xqspi = spi_controller_get_devdata(ctlr);
-	int ret = 0;
-
-	ret = clk_enable(xqspi->pclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable APB clock.\n");
-		return ret;
-	}
-
-	ret = clk_enable(xqspi->refclk);
-	if (ret) {
-		dev_err(dev, "Cannot enable device clock.\n");
-		clk_disable(xqspi->pclk);
-		return ret;
-	}
 
 	spi_controller_resume(ctlr);
 
-	clk_disable(xqspi->refclk);
-	clk_disable(xqspi->pclk);
 	return 0;
 }
 
@@ -898,8 +867,8 @@ static int __maybe_unused zynqmp_runtime_suspend(struct device *dev)
 {
 	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
 
-	clk_disable(xqspi->refclk);
-	clk_disable(xqspi->pclk);
+	clk_disable_unprepare(xqspi->refclk);
+	clk_disable_unprepare(xqspi->pclk);
 
 	return 0;
 }
@@ -917,16 +886,16 @@ static int __maybe_unused zynqmp_runtime_resume(struct device *dev)
 	struct zynqmp_qspi *xqspi = (struct zynqmp_qspi *)dev_get_drvdata(dev);
 	int ret;
 
-	ret = clk_enable(xqspi->pclk);
+	ret = clk_prepare_enable(xqspi->pclk);
 	if (ret) {
 		dev_err(dev, "Cannot enable APB clock.\n");
 		return ret;
 	}
 
-	ret = clk_enable(xqspi->refclk);
+	ret = clk_prepare_enable(xqspi->refclk);
 	if (ret) {
 		dev_err(dev, "Cannot enable device clock.\n");
-		clk_disable(xqspi->pclk);
+		clk_disable_unprepare(xqspi->pclk);
 		return ret;
 	}
 
@@ -1136,13 +1105,11 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 		goto remove_master;
 	}
 
-	init_completion(&xqspi->data_completion);
-
 	xqspi->refclk = devm_clk_get(&pdev->dev, "ref_clk");
 	if (IS_ERR(xqspi->refclk)) {
 		dev_err(dev, "ref_clk clock not found.\n");
 		ret = PTR_ERR(xqspi->refclk);
-		goto clk_dis_pclk;
+		goto remove_master;
 	}
 
 	ret = clk_prepare_enable(xqspi->pclk);
@@ -1157,6 +1124,8 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
 		goto clk_dis_pclk;
 	}
 
+	init_completion(&xqspi->data_completion);
+
 	mutex_init(&xqspi->op_lock);
 
 	pm_runtime_use_autosuspend(&pdev->dev);
-- 
2.25.1


  reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-16  0:46 [PATCH 0/5] spi: spi-zynqmp-gqspi: fix spi issues quanyang.wang
2021-04-16  0:46 ` quanyang.wang [this message]
2021-04-16 12:55   ` [PATCH 1/5] spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issue Mark Brown
2021-04-16 14:04     ` quanyang.wang
2021-04-16 15:12       ` Mark Brown
2021-04-16 15:37         ` Quanyang Wang
2021-04-16  0:46 ` [PATCH 2/5] spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume quanyang.wang
2021-04-16  0:46 ` [PATCH 3/5] spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug quanyang.wang
2021-04-16  0:46 ` [PATCH 4/5] spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op quanyang.wang
2021-04-16  0:46 ` [PATCH 5/5] spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails quanyang.wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210416004652.2975446-2-quanyang.wang@windriver.com \
    --to=quanyang.wang@windriver.com \
    --cc=amit.kumar-mahapatra@xilinx.com \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-spi/0 linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ https://lore.kernel.org/linux-spi \
		linux-spi@vger.kernel.org
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-spi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git