Linux-SPI Archive on lore.kernel.org
 help / color / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Mark Brown <broonie@kernel.org>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 1/1] spi: Rename enable1 to activate in spi_set_cs()
Date: Tue, 20 Apr 2021 16:18:46 +0300
Message-ID: <20210420131846.75983-1-andriy.shevchenko@linux.intel.com> (raw)

The enable1 is confusing name. Change it to clearly show what is
the intention behind it. No functional changes.

Fixes: 25093bdeb6bc ("spi: implement SW control for CS times")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b08efe88ccd6..74b2b1dd358b 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -797,7 +797,7 @@ int spi_register_board_info(struct spi_board_info const *info, unsigned n)
 
 static void spi_set_cs(struct spi_device *spi, bool enable)
 {
-	bool enable1 = enable;
+	bool activate = enable;
 
 	/*
 	 * Avoid calling into the driver (or doing delays) if the chip select
@@ -812,7 +812,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
 
 	if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
 	    !spi->controller->set_cs_timing) {
-		if (enable1)
+		if (activate)
 			spi_delay_exec(&spi->controller->cs_setup, NULL);
 		else
 			spi_delay_exec(&spi->controller->cs_hold, NULL);
@@ -825,8 +825,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
 		if (!(spi->mode & SPI_NO_CS)) {
 			if (spi->cs_gpiod)
 				/* polarity handled by gpiolib */
-				gpiod_set_value_cansleep(spi->cs_gpiod,
-							 enable1);
+				gpiod_set_value_cansleep(spi->cs_gpiod, activate);
 			else
 				/*
 				 * invert the enable line, as active low is
@@ -844,7 +843,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable)
 
 	if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
 	    !spi->controller->set_cs_timing) {
-		if (!enable1)
+		if (!activate)
 			spi_delay_exec(&spi->controller->cs_inactive, NULL);
 	}
 }
-- 
2.30.2


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-20 13:18 Andy Shevchenko [this message]
2021-04-22 11:18 ` Andy Shevchenko
2021-04-26 15:09 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210420131846.75983-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-spi/0 linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ https://lore.kernel.org/linux-spi \
		linux-spi@vger.kernel.org
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-spi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git