From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Ian Ray <ian.ray@ge.com>,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
devicetree@vger.kernel.org, kernel@collabora.com,
Sebastian Reichel <sebastian.reichel@collabora.com>
Subject: [PATCHv4 1/6] spi: add ancillary device support
Date: Wed, 9 Jun 2021 17:12:30 +0200 [thread overview]
Message-ID: <20210609151235.48964-2-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20210609151235.48964-1-sebastian.reichel@collabora.com>
Introduce support for ancillary devices, similar to existing
implementation for I2C. This is useful for devices having
multiple chip-selects, for example some microcontrollers
provide a normal SPI interface and a flashing SPI interface.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
drivers/spi/spi.c | 139 +++++++++++++++++++++++++++++++---------
include/linux/spi/spi.h | 2 +
2 files changed, 109 insertions(+), 32 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ba425b9c7700..7fdf224262b1 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -558,49 +558,23 @@ static int spi_dev_check(struct device *dev, void *data)
return 0;
}
-/**
- * spi_add_device - Add spi_device allocated with spi_alloc_device
- * @spi: spi_device to register
- *
- * Companion function to spi_alloc_device. Devices allocated with
- * spi_alloc_device can be added onto the spi bus with this function.
- *
- * Return: 0 on success; negative errno on failure
- */
-int spi_add_device(struct spi_device *spi)
+static int __spi_add_device(struct spi_device *spi)
{
struct spi_controller *ctlr = spi->controller;
struct device *dev = ctlr->dev.parent;
int status;
- /* Chipselects are numbered 0..max; validate. */
- if (spi->chip_select >= ctlr->num_chipselect) {
- dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
- ctlr->num_chipselect);
- return -EINVAL;
- }
-
- /* Set the bus ID string */
- spi_dev_set_name(spi);
-
- /* We need to make sure there's no other device with this
- * chipselect **BEFORE** we call setup(), else we'll trash
- * its configuration. Lock against concurrent add() calls.
- */
- mutex_lock(&spi_add_lock);
-
status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
if (status) {
dev_err(dev, "chipselect %d already in use\n",
spi->chip_select);
- goto done;
+ return status;
}
/* Controller may unregister concurrently */
if (IS_ENABLED(CONFIG_SPI_DYNAMIC) &&
!device_is_registered(&ctlr->dev)) {
- status = -ENODEV;
- goto done;
+ return -ENODEV;
}
/* Descriptors take precedence */
@@ -617,7 +591,7 @@ int spi_add_device(struct spi_device *spi)
if (status < 0) {
dev_err(dev, "can't setup %s, status %d\n",
dev_name(&spi->dev), status);
- goto done;
+ return status;
}
/* Device may be bound to an active driver when this returns */
@@ -628,12 +602,64 @@ int spi_add_device(struct spi_device *spi)
else
dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
-done:
+ return status;
+}
+
+/**
+ * spi_add_device - Add spi_device allocated with spi_alloc_device
+ * @spi: spi_device to register
+ *
+ * Companion function to spi_alloc_device. Devices allocated with
+ * spi_alloc_device can be added onto the spi bus with this function.
+ *
+ * Return: 0 on success; negative errno on failure
+ */
+int spi_add_device(struct spi_device *spi)
+{
+ struct spi_controller *ctlr = spi->controller;
+ struct device *dev = ctlr->dev.parent;
+ int status;
+
+ /* Chipselects are numbered 0..max; validate. */
+ if (spi->chip_select >= ctlr->num_chipselect) {
+ dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
+ ctlr->num_chipselect);
+ return -EINVAL;
+ }
+
+ /* Set the bus ID string */
+ spi_dev_set_name(spi);
+
+ /* We need to make sure there's no other device with this
+ * chipselect **BEFORE** we call setup(), else we'll trash
+ * its configuration. Lock against concurrent add() calls.
+ */
+ mutex_lock(&spi_add_lock);
+ status = __spi_add_device(spi);
mutex_unlock(&spi_add_lock);
return status;
}
EXPORT_SYMBOL_GPL(spi_add_device);
+static int spi_add_device_locked(struct spi_device *spi)
+{
+ struct spi_controller *ctlr = spi->controller;
+ struct device *dev = ctlr->dev.parent;
+
+ /* Chipselects are numbered 0..max; validate. */
+ if (spi->chip_select >= ctlr->num_chipselect) {
+ dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
+ ctlr->num_chipselect);
+ return -EINVAL;
+ }
+
+ /* Set the bus ID string */
+ spi_dev_set_name(spi);
+
+ WARN_ON(!mutex_is_locked(&spi_add_lock));
+ return __spi_add_device(spi);
+}
+
/**
* spi_new_device - instantiate one new SPI device
* @ctlr: Controller to which device is connected
@@ -1993,7 +2019,7 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
}
/* Device address */
- rc = of_property_read_u32(nc, "reg", &value);
+ rc = of_property_read_u32_index(nc, "reg", 0, &value);
if (rc) {
dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
nc, rc);
@@ -2084,6 +2110,55 @@ static void of_register_spi_devices(struct spi_controller *ctlr)
static void of_register_spi_devices(struct spi_controller *ctlr) { }
#endif
+/**
+ * spi_new_ancillary_device() - Register ancillary SPI device
+ * @spi: Pointer to the main SPI device registering the ancillary device
+ * @chip_select: Chip Select of the ancillary device
+ *
+ * Register an ancillary SPI device; for example some chips have a chip-select
+ * for normal device usage and another one for setup/firmware upload.
+ *
+ * This may only be called from main SPI device's probe routine.
+ *
+ * Return: 0 on success; negative errno on failure
+ */
+struct spi_device *spi_new_ancillary_device(struct spi_device *spi,
+ u8 chip_select)
+{
+ struct spi_device *ancillary;
+ int rc = 0;
+
+ /* Alloc an spi_device */
+ ancillary = spi_alloc_device(spi->controller);
+ if (!ancillary) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ strlcpy(ancillary->modalias, "dummy", sizeof(ancillary->modalias));
+
+ /* Use provided chip-select for ancillary device */
+ ancillary->chip_select = chip_select;
+
+ /* Take over SPI mode/speed from SPI main device */
+ ancillary->max_speed_hz = spi->max_speed_hz;
+ ancillary->mode = ancillary->mode;
+
+ /* Register the new device */
+ rc = spi_add_device_locked(ancillary);
+ if (rc) {
+ dev_err(&spi->dev, "failed to register ancillary device\n");
+ goto err_out;
+ }
+
+ return ancillary;
+
+err_out:
+ spi_dev_put(ancillary);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(spi_new_ancillary_device);
+
#ifdef CONFIG_ACPI
struct acpi_spi_lookup {
struct spi_controller *ctlr;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 360a3bc767ca..1949230ccd3a 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -299,6 +299,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
driver_unregister(&sdrv->driver);
}
+extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 chip_select);
+
/* use a define to avoid include chaining to get THIS_MODULE */
#define spi_register_driver(driver) \
__spi_register_driver(THIS_MODULE, driver)
--
2.30.2
next prev parent reply other threads:[~2021-06-09 15:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 15:12 [PATCHv4 0/6] GE Healthcare PPD firmware upgrade driver for ACHC Sebastian Reichel
2021-06-09 15:12 ` Sebastian Reichel [this message]
2021-06-11 9:06 ` [PATCHv4 1/6] spi: add ancillary device support Greg Kroah-Hartman
2021-06-11 17:22 ` Sebastian Reichel
2021-06-13 14:18 ` Andy Shevchenko
2021-06-17 12:51 ` Mark Brown
2021-06-09 15:12 ` [PATCHv4 2/6] spi: dt-bindings: support devices with multiple chipselects Sebastian Reichel
2021-06-09 15:12 ` [PATCHv4 3/6] dt-bindings: misc: ge-achc: Convert to DT schema format Sebastian Reichel
2021-06-10 16:41 ` Rob Herring
2021-06-09 15:12 ` [PATCHv4 4/6] ARM: dts: imx53-ppd: Fix ACHC entry Sebastian Reichel
2021-06-09 15:12 ` [PATCHv4 5/6] misc: nxp-ezport: introduce EzPort support Sebastian Reichel
2021-06-11 9:05 ` Greg Kroah-Hartman
2021-06-11 9:45 ` Greg Kroah-Hartman
2021-06-09 15:12 ` [PATCHv4 6/6] misc: gehc-achc: new driver Sebastian Reichel
2021-06-11 9:02 ` Greg Kroah-Hartman
2021-06-22 15:14 ` (subset) [PATCHv4 0/6] GE Healthcare PPD firmware upgrade driver for ACHC Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210609151235.48964-2-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=ian.ray@ge.com \
--cc=kernel@collabora.com \
--cc=kernel@pengutronix.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).