[PATCH AUTOSEL 5.13 050/219] spi: imx: fix ERR009165

[PATCH AUTOSEL 5.13 050/219] spi: imx: fix ERR009165

[Sasha Levin]

From: Robin Gong <yibin.gong@nxp.com>

[ Upstream commit 980f884866eed4dda2a18de888c5a67dde67d640 ]

Change to XCH  mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 2872993550bd..ac86b3d1052d 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -622,8 +622,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	if (spi_imx->usedma)
-		ctrl |= MX51_ECSPI_CTRL_SMC;
+	/* ERR009165: work in XHC mode as PIO */
+	ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -637,7 +637,7 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(spi_imx->wml) |
+		MX51_ECSPI_DMA_TX_WML(0) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1253,10 +1253,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,
 {
 	int ret;
 
-	/* use pio mode for i.mx6dl chip TKT238285 */
-	if (of_machine_is_compatible("fsl,imx6dl"))
-		return 0;
-
 	spi_imx->wml = spi_imx->devtype_data->fifo_size / 2;
 
 	/* Prepare for TX DMA: */
-- 
2.30.2

[PATCH AUTOSEL 5.13 051/219] spi: imx: remove ERR009165 workaround on i.mx6ul

[Sasha Levin]

From: Robin Gong <yibin.gong@nxp.com>

[ Upstream commit 8eb1252bbedfb0e800bbbd3e9055a7db0ae2cac9 ]

ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .

For removing workaround on those chips. Add new i.mx6ul type.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-imx.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index ac86b3d1052d..113afee6a3c8 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -77,6 +77,11 @@ struct spi_imx_devtype_data {
 	bool has_slavemode;
 	unsigned int fifo_size;
 	bool dynamic_burst;
+	/*
+	 * ERR009165 fixed or not:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool tx_glitch_fixed;
 	enum spi_imx_devtype devtype;
 };
 
@@ -622,8 +627,14 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 	ctrl |= mx51_ecspi_clkdiv(spi_imx, spi_imx->spi_bus_clk, &clk);
 	spi_imx->spi_bus_clk = clk;
 
-	/* ERR009165: work in XHC mode as PIO */
-	ctrl &= ~MX51_ECSPI_CTRL_SMC;
+	/*
+	 * ERR009165: work in XHC mode instead of SMC as PIO on the chips
+	 * before i.mx6ul.
+	 */
+	if (spi_imx->usedma && spi_imx->devtype_data->tx_glitch_fixed)
+		ctrl |= MX51_ECSPI_CTRL_SMC;
+	else
+		ctrl &= ~MX51_ECSPI_CTRL_SMC;
 
 	writel(ctrl, spi_imx->base + MX51_ECSPI_CTRL);
 
@@ -632,12 +643,16 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
 
 static void mx51_setup_wml(struct spi_imx_data *spi_imx)
 {
+	u32 tx_wml = 0;
+
+	if (spi_imx->devtype_data->tx_glitch_fixed)
+		tx_wml = spi_imx->wml;
 	/*
 	 * Configure the DMA register: setup the watermark
 	 * and enable DMA request.
 	 */
 	writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) |
-		MX51_ECSPI_DMA_TX_WML(0) |
+		MX51_ECSPI_DMA_TX_WML(tx_wml) |
 		MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) |
 		MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN |
 		MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA);
@@ -1028,6 +1043,23 @@ static struct spi_imx_devtype_data imx53_ecspi_devtype_data = {
 	.devtype = IMX53_ECSPI,
 };
 
+static struct spi_imx_devtype_data imx6ul_ecspi_devtype_data = {
+	.intctrl = mx51_ecspi_intctrl,
+	.prepare_message = mx51_ecspi_prepare_message,
+	.prepare_transfer = mx51_ecspi_prepare_transfer,
+	.trigger = mx51_ecspi_trigger,
+	.rx_available = mx51_ecspi_rx_available,
+	.reset = mx51_ecspi_reset,
+	.setup_wml = mx51_setup_wml,
+	.fifo_size = 64,
+	.has_dmamode = true,
+	.dynamic_burst = true,
+	.has_slavemode = true,
+	.tx_glitch_fixed = true,
+	.disable = mx51_ecspi_disable,
+	.devtype = IMX51_ECSPI,
+};
+
 static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx1-cspi", .data = &imx1_cspi_devtype_data, },
 	{ .compatible = "fsl,imx21-cspi", .data = &imx21_cspi_devtype_data, },
@@ -1036,6 +1068,7 @@ static const struct of_device_id spi_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx35-cspi", .data = &imx35_cspi_devtype_data, },
 	{ .compatible = "fsl,imx51-ecspi", .data = &imx51_ecspi_devtype_data, },
 	{ .compatible = "fsl,imx53-ecspi", .data = &imx53_ecspi_devtype_data, },
+	{ .compatible = "fsl,imx6ul-ecspi", .data = &imx6ul_ecspi_devtype_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, spi_imx_dt_ids);
-- 
2.30.2

[PATCH AUTOSEL 5.13 116/219] spi: tegra20-slink: Improve runtime PM usage

[Sasha Levin]

From: Dmitry Osipenko <digetx@gmail.com>

[ Upstream commit e4bb903fda0e9bbafa1338dcd2ee5e4d3ccc50da ]

The Tegra SPI driver supports runtime PM, which controls the clock
enable state, but the clk is also enabled separately from the RPM
at the driver probe time, and thus, stays always on. Fix it.

Runtime PM now is always available on Tegra, hence there is no need to
check the RPM presence in the driver anymore. Remove these checks.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210731192731.5869-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-tegra20-slink.c | 73 +++++++++++----------------------
 1 file changed, 25 insertions(+), 48 deletions(-)

diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 6a726c95ac7a..501eca1d0f89 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1061,33 +1061,12 @@ static int tegra_slink_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Can not get clock %d\n", ret);
 		goto exit_free_master;
 	}
-	ret = clk_prepare(tspi->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Clock prepare failed %d\n", ret);
-		goto exit_free_master;
-	}
-	ret = clk_enable(tspi->clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
-		goto exit_clk_unprepare;
-	}
-
-	spi_irq = platform_get_irq(pdev, 0);
-	tspi->irq = spi_irq;
-	ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
-			tegra_slink_isr_thread, IRQF_ONESHOT,
-			dev_name(&pdev->dev), tspi);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
-					tspi->irq);
-		goto exit_clk_disable;
-	}
 
 	tspi->rst = devm_reset_control_get_exclusive(&pdev->dev, "spi");
 	if (IS_ERR(tspi->rst)) {
 		dev_err(&pdev->dev, "can not get reset\n");
 		ret = PTR_ERR(tspi->rst);
-		goto exit_free_irq;
+		goto exit_free_master;
 	}
 
 	tspi->max_buf_size = SLINK_FIFO_DEPTH << 2;
@@ -1095,7 +1074,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 
 	ret = tegra_slink_init_dma_param(tspi, true);
 	if (ret < 0)
-		goto exit_free_irq;
+		goto exit_free_master;
 	ret = tegra_slink_init_dma_param(tspi, false);
 	if (ret < 0)
 		goto exit_rx_dma_free;
@@ -1106,16 +1085,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	init_completion(&tspi->xfer_completion);
 
 	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
-		ret = tegra_slink_runtime_resume(&pdev->dev);
-		if (ret)
-			goto exit_pm_disable;
-	}
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret) {
 		dev_err(&pdev->dev, "pm runtime get failed, e = %d\n", ret);
-		pm_runtime_put_noidle(&pdev->dev);
 		goto exit_pm_disable;
 	}
 
@@ -1123,33 +1095,43 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	udelay(2);
 	reset_control_deassert(tspi->rst);
 
+	spi_irq = platform_get_irq(pdev, 0);
+	tspi->irq = spi_irq;
+	ret = request_threaded_irq(tspi->irq, tegra_slink_isr,
+				   tegra_slink_isr_thread, IRQF_ONESHOT,
+				   dev_name(&pdev->dev), tspi);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register ISR for IRQ %d\n",
+			tspi->irq);
+		goto exit_pm_put;
+	}
+
 	tspi->def_command_reg  = SLINK_M_S;
 	tspi->def_command2_reg = SLINK_CS_ACTIVE_BETWEEN;
 	tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
 	tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
-	pm_runtime_put(&pdev->dev);
 
 	master->dev.of_node = pdev->dev.of_node;
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "can not register to master err %d\n", ret);
-		goto exit_pm_disable;
+		goto exit_free_irq;
 	}
+
+	pm_runtime_put(&pdev->dev);
+
 	return ret;
 
+exit_free_irq:
+	free_irq(spi_irq, tspi);
+exit_pm_put:
+	pm_runtime_put(&pdev->dev);
 exit_pm_disable:
 	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_slink_runtime_suspend(&pdev->dev);
+
 	tegra_slink_deinit_dma_param(tspi, false);
 exit_rx_dma_free:
 	tegra_slink_deinit_dma_param(tspi, true);
-exit_free_irq:
-	free_irq(spi_irq, tspi);
-exit_clk_disable:
-	clk_disable(tspi->clk);
-exit_clk_unprepare:
-	clk_unprepare(tspi->clk);
 exit_free_master:
 	spi_master_put(master);
 	return ret;
@@ -1162,8 +1144,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
 
 	free_irq(tspi->irq, tspi);
 
-	clk_disable(tspi->clk);
-	clk_unprepare(tspi->clk);
+	pm_runtime_disable(&pdev->dev);
 
 	if (tspi->tx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, false);
@@ -1171,10 +1152,6 @@ static int tegra_slink_remove(struct platform_device *pdev)
 	if (tspi->rx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, true);
 
-	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_slink_runtime_suspend(&pdev->dev);
-
 	return 0;
 }
 
-- 
2.30.2