[PATCH] spi: spidev: Add SPI ID table

[PATCH] spi: spidev: Add SPI ID table

[Mark Brown]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: patches@opensource.cirrus.com
---
 drivers/spi/spidev.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 6dc29ce3b4bf..79c22fc8b0a4 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -673,6 +673,19 @@ static const struct file_operations spidev_fops = {
 
 static struct class *spidev_class;
 
+static const struct spi_device_id spidev_spi_ids[] = {
+	{ .name = "dh2228fv" },
+	{ .name = "ltc2488" },
+	{ .name = "sx1301" },
+	{ .name = "bk4" },
+	{ .name = "dhcom-board" },
+	{ .name = "m53cpld" },
+	{ .name = "spi-petra" },
+	{ .name = "spi-authenta" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, spidev_dt_ids);
+
 #ifdef CONFIG_OF
 static const struct of_device_id spidev_dt_ids[] = {
 	{ .compatible = "rohm,dh2228fv" },
@@ -818,6 +831,7 @@ static struct spi_driver spidev_spi_driver = {
 	},
 	.probe =	spidev_probe,
 	.remove =	spidev_remove,
+	.id_table =	spidev_spi_ids,
 
 	/* NOTE:  suspend/resume methods are not necessary here.
 	 * We don't do anything except pass the requests to/from
-- 
2.20.1

Re: [PATCH] spi: spidev: Add SPI ID table

[Mark Brown]

On Thu, 23 Sep 2021 18:00:23 +0100, Mark Brown wrote:
> Currently autoloading for SPI devices does not use the DT ID table, it uses
> SPI modalises. Supporting OF modalises is going to be difficult if not
> impractical, an attempt was made but has been reverted, so ensure that
> module autoloading works for this driver by adding an id_table listing the
> SPI IDs for everything.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: spidev: Add SPI ID table
      commit: 6840615f85f6046039ebc4989870ddb12892b7fc

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark