From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
"Tudor Ambarus" <tudor.ambarus@microchip.com>,
"Pratyush Yadav" <p.yadav@ti.com>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Richard Weinberger" <richard@nod.at>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
"Andrew Jeffery" <andrew@aj.id.au>,
"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>,
"Tao Ren" <rentao.bupt@gmail.com>,
"Jae Hyun Yoo" <quic_jaehyoo@quicinc.com>
Subject: [PATCH v5 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers
Date: Mon, 2 May 2022 10:13:31 +0200 [thread overview]
Message-ID: <20220502081341.203369-2-clg@kaod.org> (raw)
In-Reply-To: <20220502081341.203369-1-clg@kaod.org>
This is compatible with the current driver and addresses issues when
running 'make dt_binding_check'.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++----
arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++------
arch/arm/boot/dts/aspeed-g6.dtsi | 9 +++------
3 files changed, 8 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index fa8b581c3d6c..3b7b98e787e7 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -54,8 +54,7 @@ ahb {
ranges;
fmc: spi@1e620000 {
- reg = < 0x1e620000 0x94
- 0x20000000 0x10000000 >;
+ reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-fmc";
@@ -91,8 +90,7 @@ flash@4 {
};
spi: spi@1e630000 {
- reg = < 0x1e630000 0x18
- 0x30000000 0x10000000 >;
+ reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2400-spi";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 4147b397c883..1e727cbaab14 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -55,8 +55,7 @@ ahb {
ranges;
fmc: spi@1e620000 {
- reg = < 0x1e620000 0xc4
- 0x20000000 0x10000000 >;
+ reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-fmc";
@@ -84,8 +83,7 @@ flash@2 {
};
spi1: spi@1e630000 {
- reg = < 0x1e630000 0xc4
- 0x30000000 0x08000000 >;
+ reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
@@ -106,8 +104,7 @@ flash@1 {
};
spi2: spi@1e631000 {
- reg = < 0x1e631000 0xc4
- 0x38000000 0x08000000 >;
+ reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2500-spi";
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 3d5ce9da42c3..6ae5dfecbdf1 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -95,8 +95,7 @@ gic: interrupt-controller@40461000 {
};
fmc: spi@1e620000 {
- reg = < 0x1e620000 0xc4
- 0x20000000 0x10000000 >;
+ reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2600-fmc";
@@ -124,8 +123,7 @@ flash@2 {
};
spi1: spi@1e630000 {
- reg = < 0x1e630000 0xc4
- 0x30000000 0x10000000 >;
+ reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2600-spi";
@@ -146,8 +144,7 @@ flash@1 {
};
spi2: spi@1e631000 {
- reg = < 0x1e631000 0xc4
- 0x50000000 0x10000000 >;
+ reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "aspeed,ast2600-spi";
--
2.35.1
next prev parent reply other threads:[~2022-05-02 8:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-02 8:13 [PATCH v5 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-05-02 8:13 ` Cédric Le Goater [this message]
2022-05-02 8:13 ` [PATCH v5 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-05-02 15:33 ` Rob Herring
2022-05-02 16:08 ` Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 04/11] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 05/11] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 06/11] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 07/11] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 08/11] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes Cédric Le Goater
2022-05-02 8:13 ` [PATCH v5 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 Cédric Le Goater
2022-05-03 5:38 ` [PATCH v5 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220502081341.203369-2-clg@kaod.org \
--to=clg@kaod.org \
--cc=andrew@aj.id.au \
--cc=broonie@kernel.org \
--cc=chin-ting_kuo@aspeedtech.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=miquel.raynal@bootlin.com \
--cc=p.yadav@ti.com \
--cc=quic_jaehyoo@quicinc.com \
--cc=rentao.bupt@gmail.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).