From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Sergey Shtylyov <s.shtylyov@omp.ru>,
Damien Le Moal <damien.lemoal@opensource.wdc.com>,
Wolfram Sang <wsa@kernel.org>,
Chris Packham <chris.packham@alliedtelesis.co.nz>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-ide@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-can@vger.kernel.org, netdev@vger.kernel.org,
linux-spi@vger.kernel.org, linux-serial@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Anatolij Gustschin <agust@denx.de>,
Wolfgang Grandegger <wg@grandegger.com>,
Eric Dumazet <edumazet@google.com>,
Paolo Abeni <pabeni@redhat.com>,
Pantelis Antoniou <pantelis.antoniou@gmail.com>,
Mark Brown <broonie@kernel.org>
Subject: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
Date: Wed, 4 May 2022 16:44:47 +0300 [thread overview]
Message-ID: <20220504134449.64473-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20220504134449.64473-1-andriy.shevchenko@linux.intel.com>
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help
cleaning up other parts of the kernel from OF specific code.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
arch/powerpc/include/asm/mpc5xxx.h | 9 +++-
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +-
arch/powerpc/sysdev/mpc5xxx_clocks.c | 41 ++++++++++---------
drivers/ata/pata_mpc52xx.c | 2 +-
drivers/i2c/busses/i2c-mpc.c | 7 ++--
drivers/net/can/mscan/mpc5xxx_can.c | 2 +-
drivers/net/ethernet/freescale/fec_mpc52xx.c | 2 +-
.../net/ethernet/freescale/fec_mpc52xx_phy.c | 3 +-
.../net/ethernet/freescale/fs_enet/mii-fec.c | 4 +-
drivers/spi/spi-mpc52xx.c | 2 +-
drivers/tty/serial/mpc52xx_uart.c | 4 +-
11 files changed, 44 insertions(+), 34 deletions(-)
diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/asm/mpc5xxx.h
index 2f60f5c5461b..44db26380435 100644
--- a/arch/powerpc/include/asm/mpc5xxx.h
+++ b/arch/powerpc/include/asm/mpc5xxx.h
@@ -11,7 +11,14 @@
#ifndef __ASM_POWERPC_MPC5xxx_H__
#define __ASM_POWERPC_MPC5xxx_H__
-extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node);
+#include <linux/property.h>
+
+unsigned long mpc5xxx_fwnode_get_bus_frequency(struct fwnode_handle *fwnode);
+
+static inline unsigned long mpc5xxx_get_bus_frequency(struct device *dev)
+{
+ return mpc5xxx_fwnode_get_bus_frequency(dev_fwnode(dev));
+}
#endif /* __ASM_POWERPC_MPC5xxx_H__ */
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index f862b48b4824..8f896a42d7d8 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -720,7 +720,7 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)
raw_spin_lock_init(&gpt->lock);
gpt->dev = &ofdev->dev;
- gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
+ gpt->ipb_freq = mpc5xxx_get_bus_frequency(&ofdev->dev);
gpt->regs = of_iomap(ofdev->dev.of_node, 0);
if (!gpt->regs)
return -ENOMEM;
diff --git a/arch/powerpc/sysdev/mpc5xxx_clocks.c b/arch/powerpc/sysdev/mpc5xxx_clocks.c
index 834a6d7fbd88..c5bf7e1b3780 100644
--- a/arch/powerpc/sysdev/mpc5xxx_clocks.c
+++ b/arch/powerpc/sysdev/mpc5xxx_clocks.c
@@ -1,31 +1,34 @@
// SPDX-License-Identifier: GPL-2.0
-/**
- * mpc5xxx_get_bus_frequency - Find the bus frequency for a device
- * @node: device node
- *
- * Returns bus frequency (IPS on MPC512x, IPB on MPC52xx),
- * or 0 if the bus frequency cannot be found.
- */
#include <linux/kernel.h>
-#include <linux/of_platform.h>
#include <linux/export.h>
+#include <linux/property.h>
+
#include <asm/mpc5xxx.h>
-unsigned long mpc5xxx_get_bus_frequency(struct device_node *node)
+/**
+ * mpc5xxx_fwnode_get_bus_frequency - Find the bus frequency for a firmware node
+ * @fwnode: firmware node
+ *
+ * Returns bus frequency (IPS on MPC512x, IPB on MPC52xx),
+ * or 0 if the bus frequency cannot be found.
+ */
+unsigned long mpc5xxx_fwnode_get_bus_frequency(struct fwnode_handle *fwnode)
{
- const unsigned int *p_bus_freq = NULL;
+ struct fwnode_handle *parent;
+ u32 bus_freq;
+ int ret;
- of_node_get(node);
- while (node) {
- p_bus_freq = of_get_property(node, "bus-frequency", NULL);
- if (p_bus_freq)
- break;
+ ret = fwnode_property_read_u32(fwnode, "bus-frequency", &bus_freq);
+ if (!ret)
+ return bus_freq;
- node = of_get_next_parent(node);
+ fwnode_for_each_parent_node(fwnode, parent) {
+ ret = fwnode_property_read_u32(parent, "bus-frequency", &bus_freq);
+ if (!ret)
+ return bus_freq;
}
- of_node_put(node);
- return p_bus_freq ? *p_bus_freq : 0;
+ return 0;
}
-EXPORT_SYMBOL(mpc5xxx_get_bus_frequency);
+EXPORT_SYMBOL(mpc5xxx_fwnode_get_bus_frequency);
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 03b6ae37a578..6559b606736d 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -683,7 +683,7 @@ static int mpc52xx_ata_probe(struct platform_device *op)
struct bcom_task *dmatsk;
/* Get ipb frequency */
- ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node);
+ ipb_freq = mpc5xxx_get_bus_frequency(&op->dev);
if (!ipb_freq) {
dev_err(&op->dev, "could not determine IPB bus frequency\n");
return -ENODEV;
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 6c698c10d3cd..2030668ecde5 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -239,6 +239,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
u32 *real_clk)
{
+ struct fwnode_handle = of_fwnode_handle(node);
const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
u32 divider;
@@ -246,12 +247,12 @@ static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
if (clock == MPC_I2C_CLOCK_LEGACY) {
/* see below - default fdr = 0x3f -> div = 2048 */
- *real_clk = mpc5xxx_get_bus_frequency(node) / 2048;
+ *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / 2048;
return -EINVAL;
}
/* Determine divider value */
- divider = mpc5xxx_get_bus_frequency(node) / clock;
+ divider = mpc5xxx_fwnode_get_bus_frequency(fwnode) / clock;
/*
* We want to choose an FDR/DFSR that generates an I2C bus speed that
@@ -266,7 +267,7 @@ static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
break;
}
- *real_clk = mpc5xxx_get_bus_frequency(node) / div->divider;
+ *real_clk = mpc5xxx_fwnode_get_bus_frequency(fwnode) / div->divider;
return (int)div->fdr;
}
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 65ba6697bd7d..c469b2f3e57d 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -63,7 +63,7 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,
else
*mscan_clksrc = MSCAN_CLKSRC_XTAL;
- freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
+ freq = mpc5xxx_get_bus_frequency(&ofdev->dev);
if (!freq)
return 0;
diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx.c b/drivers/net/ethernet/freescale/fec_mpc52xx.c
index be0bd4b44926..159d59147827 100644
--- a/drivers/net/ethernet/freescale/fec_mpc52xx.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx.c
@@ -922,7 +922,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)
/* Start with safe defaults for link connection */
priv->speed = 100;
priv->duplex = DUPLEX_HALF;
- priv->mdio_speed = ((mpc5xxx_get_bus_frequency(np) >> 20) / 5) << 1;
+ priv->mdio_speed = ((mpc5xxx_get_bus_frequency(&op->dev) >> 20) / 5) << 1;
/* The current speed preconfigures the speed of the MII link */
prop = of_get_property(np, "current-speed", &prop_size);
diff --git a/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c b/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
index b5497e308302..3c9b1fae956b 100644
--- a/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
+++ b/drivers/net/ethernet/freescale/fec_mpc52xx_phy.c
@@ -99,8 +99,7 @@ static int mpc52xx_fec_mdio_probe(struct platform_device *of)
dev_set_drvdata(dev, bus);
/* set MII speed */
- out_be32(&priv->regs->mii_speed,
- ((mpc5xxx_get_bus_frequency(of->dev.of_node) >> 20) / 5) << 1);
+ out_be32(&priv->regs->mii_speed, ((mpc5xxx_get_bus_frequency(dev) >> 20) / 5) << 1);
err = of_mdiobus_register(bus, np);
if (err)
diff --git a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
index 152f4d83765a..d37d7a19a759 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mii-fec.c
@@ -102,7 +102,7 @@ static int fs_enet_mdio_probe(struct platform_device *ofdev)
struct resource res;
struct mii_bus *new_bus;
struct fec_info *fec;
- int (*get_bus_freq)(struct device_node *);
+ int (*get_bus_freq)(struct device *);
int ret = -ENOMEM, clock, speed;
match = of_match_device(fs_enet_mdio_fec_match, &ofdev->dev);
@@ -136,7 +136,7 @@ static int fs_enet_mdio_probe(struct platform_device *ofdev)
}
if (get_bus_freq) {
- clock = get_bus_freq(ofdev->dev.of_node);
+ clock = get_bus_freq(&ofdev->dev);
if (!clock) {
/* Use maximum divider if clock is unknown */
dev_warn(&ofdev->dev, "could not determine IPS clock\n");
diff --git a/drivers/spi/spi-mpc52xx.c b/drivers/spi/spi-mpc52xx.c
index 3ebdce804b90..bc5e36fd4288 100644
--- a/drivers/spi/spi-mpc52xx.c
+++ b/drivers/spi/spi-mpc52xx.c
@@ -437,7 +437,7 @@ static int mpc52xx_spi_probe(struct platform_device *op)
ms->irq0 = irq_of_parse_and_map(op->dev.of_node, 0);
ms->irq1 = irq_of_parse_and_map(op->dev.of_node, 1);
ms->state = mpc52xx_spi_fsmstate_idle;
- ms->ipb_freq = mpc5xxx_get_bus_frequency(op->dev.of_node);
+ ms->ipb_freq = mpc5xxx_get_bus_frequency(&op->dev);
ms->gpio_cs_count = of_gpio_count(op->dev.of_node);
if (ms->gpio_cs_count > 0) {
master->num_chipselect = ms->gpio_cs_count;
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index e50f069b5ebb..3f1986c89694 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1630,7 +1630,7 @@ mpc52xx_console_setup(struct console *co, char *options)
return ret;
}
- uartclk = mpc5xxx_get_bus_frequency(np);
+ uartclk = mpc5xxx_fwnode_get_bus_frequency(of_fwnode_handle(np));
if (uartclk == 0) {
pr_debug("Could not find uart clock frequency!\n");
return -EINVAL;
@@ -1747,7 +1747,7 @@ static int mpc52xx_uart_of_probe(struct platform_device *op)
/* set the uart clock to the input clock of the psc, the different
* prescalers are taken into account in the set_baudrate() methods
* of the respective chip */
- uartclk = mpc5xxx_get_bus_frequency(op->dev.of_node);
+ uartclk = mpc5xxx_get_bus_frequency(&op->dev);
if (uartclk == 0) {
dev_dbg(&op->dev, "Could not find uart clock frequency!\n");
return -EINVAL;
--
2.35.1
next prev parent reply other threads:[~2022-05-04 13:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-04 13:44 [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq() Andy Shevchenko
2022-05-04 13:44 ` Andy Shevchenko [this message]
2022-05-04 14:08 ` [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode Marc Kleine-Budde
2022-05-04 14:14 ` Damien Le Moal
2022-05-04 15:03 ` Mark Brown
2022-05-04 20:11 ` Wolfram Sang
2022-05-04 22:27 ` kernel test robot
2022-05-04 23:52 ` Chris Packham
2022-05-05 1:03 ` kernel test robot
2022-05-04 13:44 ` [PATCH v1 3/4] powerpc/52xx: Get rid of of_node assignment Andy Shevchenko
2022-05-04 13:44 ` [PATCH v1 4/4] powerpc/52xx: Convert to use fwnode API Andy Shevchenko
2022-05-04 20:09 ` [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq() Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220504134449.64473-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=agust@denx.de \
--cc=benh@kernel.crashing.org \
--cc=broonie@kernel.org \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=damien.lemoal@opensource.wdc.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=jirislaby@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mkl@pengutronix.de \
--cc=mpe@ellerman.id.au \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pantelis.antoniou@gmail.com \
--cc=paulus@samba.org \
--cc=s.shtylyov@omp.ru \
--cc=wg@grandegger.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).